• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.33-38
• /
• 2022

As the intense heat continues, many cases of highway pavement blow up and bridge expansion joints damages have been inspected. Especially, Expansion joint closure of bridges is an important problem that can threat the safety of the bridge structure or reduce long-term durability. This paper proposed a structural analysis method for bridges having expansion joint closure and structural analysis was performed to verify the effects according to bridge types. Analysis bridges were divided into four types: concrete and steel bridges, shallow and piled foundations. To induce the situation of abutments and bridge decks are jammed, the following loads were additionally considered; lateral flow pressure, pavement expansion by alkali-aggregate reaction, creep settlement of backfill. The structural analysis method was verified by comparing the structural analysis results with the actually measured joint gap data. In addition, behavioral analysis due to joint closure was conducted to confirm the change in safety ratio by type of superstructure as the axial force increased.

• Journal of Technologic Dentistry
• /
• v.37 no.4
• /
• pp.261-270
• /
• 2015

Purpose: This study is intended to survey male and female university students to see if there is correlation between temporomandibular disorder and oral habits known to cause temporomandibular disorder. Methods: A survey was conducted to 400 male and female university students attending two universities located in Daegu Metropolitan City and Gyeongsangbuk-do to examine if there is correlation between oral habits and temporomandibular disorder. Among total 400 questionnaire sheets, 334 (83.5%) sheets were used for final analysis except for those unreliably answered or containing error. Results: Female students showed a higher prevalence rate of temporomandibular joint pain than male students, and those having the habit of resting jaw on hand indicated a higher prevalence rate of temporomandibular joint pain, temporomandibular joint clicking, or trismus than normal students not having it. Also, those having the habit of tooth clenching showed a significantly higher prevalence rate of temporomandibular joint pain or temporomandibular joint clicking than normal students not having it. Conclusion: It can be concluded that the habit of resting jaw on hand is closely related with temporomandibular disorder like temporomandibular joint pain, temporomandibular joint clicking, or trismus, and the habit of tooth clenching is significantly correlated with such symptoms as temporomandibular joint pain and temporomandibular joint clicking.

• Journal of muscle and joint health
• /
• v.23 no.3
• /
• pp.152-158
• /
• 2016

Purpose:The purpose of this study was to examine the degree of joint pain, limitation of daily activities, and frequency of outpatient visits. Methods: This secondary analysis study used the data from the fifth Korean National Health and Nutrition Examination Survey (KNHNES). The data about general characteristics, prevalence and treatment of osteoarthritis, limitation of activities of daily living (ADL) and frequency of outpatient visits and hospitalization in 424 osteoarthritis patients over 50 years old were derived from the database. Data were analyzed with complex samples in SPSS ver. 20.0. Results: Among people with knee joint pain, 79.3% reported they had more than 4 out of 10 points of the degree of pain. Meanwhile, 97.3% of people with hip joint pain reported that they had more than 4 out of 10 points of the degree of pain. People reporting 10 out of 10 point of pain were 21.4% of those with knee joint pain and 25% of those with hip joint pain. The mean of the degree of knee joint pain was 6.35, and the mean of the degree of hip joint pain was 6.89 out of 10 points. About 50% of people with osteoarthritis visited an outpatient clinic within the last 2 weeks, and 27% had limitation of ADL. Conclusion: It is necessary to develop an integrated intervention program to improve quality of life in patients with osteoarthritis.

• The Journal of Korean Physical Therapy
• /
• v.3 no.1
• /
• pp.97-108
• /
• 1991

The purpose of this article is to know the standard figures of joint range of motion, in conjuction with age and sen, for normal adults. The results of assessment and analysis io shoulder and hip joint range of motion are as follows : 1) The average shoulder joint range of motion in normal adults are $160.5^{\circ}$ in flexion, $53.5^{\circ}$ in extension, $159.3^{\circ}$ in adduction, $62.3^{\circ}$ in internal rotation, $83.9^{\circ}$ in external rotation, The average hip joint range of motions are $116.8^{\circ}$ in flexion, $16.1^{\circ}$ in extension, $41.1^{\circ}$ in abduction, $33.8^{\circ}$ in abduction, $40.0^{\circ}$ in interne rotation, $41.2^{\circ}$ in external rotation. 2) There is no significant difference in shoulder and hip joint range of motion between male and female (p>0.05). 3) As to the inter-relation in age and range of motion, the left flexion and extension, internal rotation and right extension in shoulder joint is decreased gradually with increasing age, and left flexion (knee flexion, knee extension) and right flexion (knee extension) in hip joint is decreased with increasing age (p<0.01). 4) Relating to age and sex, the twenties male shows highest range of motion in shoulder and hip joint, with .the fifties female shows, lowest range of motion.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.633-641
• /
• 2012

In this study, the effects of the inelastic shear behavior of beam-column joint on the response of RC OMRF are evaluated in the inelastic time history analysis. For an example, a 5-story structure for site class SB and seismic design category C was designed in accordance with KBC2009. Bending moment-curvature relationship for beam and column was evaluated using fiber model and bending moment-rotation relationship for beam-column joint was calculated using simple and unified joint shear behavior model and moment equilibrium relationship. The hysteretic behavior was simulated using three-parameter model suggested in IDARC program. The inelastic time history analysis with PGA for return period of 2400 years showed that the model with inelastic beam-column joint yielded smaller maximum base shear force but nearly equivalent maximum roof displacement and maximum story drift as those obtained from analysis using rigid joint. The maximum story drift satisfied the criteria of KBC2009. Therefore, the inelastic shear behavior of beam-column joint could be neglected in the structural design.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.1-15
• /
• 1998

Currently, computational analysis is a popular technology in automobile engineering. Finite element analysis is an excellent method for body analysis. For finite element analysis, accurate modeling is very important to obtain precise information. Stick modeling is a convenient way in that it is easy and simple. When a stick model is utilized, the joints are modified in the tuning process. A tuning method for the joint has been developed. The joints are modeled by designated beam elements. An optimization method called "Goal Programming" is employed to impose the target values. With the tuned joints, the entire optimization has been carried out. Using the "Recursive Quadratic Programming" algorithm, the optimization process determines the configuration of the entire structure and sizes of all the sections. For example, the structure of an electrical vehicle is modeled and analyzed by the method. The stick model works well since the structure is made of aluminium frames. Although the example handles an electrical vehicle, this method can be applied to general vehicle structures.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.230.1-230.1
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.51-53
• /
• 2005

Considerable noise is sometimes associated with degeneration of the hee joint surface. Such noise may indicate roughness or softening of the cartilage surfaces, and may be a useful index for early disease. In this study, we have evaluated arthritic pathology using the acoustical analysis of knee joint sounds. During sitting and standing periods, subjects' active knee flexion and extension were monitored. Fundamental frequency, mean amplitude of pitch, jitter and shimmer were analyzed according to the position and the joint angle. The result showed that the fundamental frequency of the 2nd patient group and standing position was higher than the others, and that the pitch of sounds changed unstably. These results suggest that an analysis of knee joint sound might assist non-invasive diagnosis of an articular pathology.

• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.3
• /
• pp.71-79
• /
• 2017

Objectives To determine the effectiveness of Tuina for temporomandibular joint disorder. Methods We searched 10 electronic databases (Pubmed, CNKI, EMBASE, Cochrane Library, KISS, KISTI, NDSL, RISS, KMBASE, DBpia) up to May 2017. We included randomized controlled trials (RCTs) using Tuina for temporomandibular joint disorder. The methodological quality of each RCT was assessed by the Cochrane risk of bias tool. Results 14 RCT studies were eligible in our review. 14 studies were divided into 4 groups, and meta-analysised. The meta-analysis of 6 studies showed favorable results for the use of Tuina. High risk of bias were observed in 9 studies. Conclusions Although there are favorable results with meta-analysis, our systematic review are highly dependent on the single source of Chinese electrical database, CNKI. Now limited evidence is available to support Tuina for temporomandibular joint disorder and further well-designed RCTs should be encouraged.

• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.494-507
• /
• 2011

Rock joint surface roughness is one of the most important parameters in shear behavior analysis of rock joint surface. Until now, estimation of joint surface roughness has been conducted by various statistical methods with two-dimensional analysis. In this study, standard roughness profile suggested by Barton and Choubey (1977) was expanded into a 3D surface and its surface roughness was analyzed by surface angularity parameter. And the validity of quantification based on surface angularity was secured through comparison with $Z_2$ and Ai parameter. Also the surface angularity parameter was compared with shear strength by joint shear test using the replicated specimen.