• Journal of Biosystems Engineering
• /
• v.29 no.6 s.107
• /
• pp.487-494
• /
• 2004

This study was conducted to develope a fertilizer-soil incorporation band tiller for the walking cultivator. Because the mixing of soil and fertilizer in the furrow of dry-field has been done manually, several time, heavy labor and much man power were required for the job. This rotary type implement is developed to substitute this manual operation for soil-fertilizer incorporation. The results of this study are summarized as follows : 1) This implement was composed of tilling device, fertilizer application device, frame and tail wheel device. 2) The revolution of driving wheel was $11\~28\;rpm$, that of application roller was $13\~14\;rpm$ the application rate range per revolution of driving wheel was $4.43\~11.80\;g$g and the application rate range by the working speed and the opening quantity was $84.12\~557.20\;g/min$. 3) The adequate working speed was $0.20\~0.40\;m/s$ and the required minimum width of open furrow was 250 mm.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.2
• /
• pp.71-81
• /
• 2023

This study examined the transition process of clinical laboratory technologists' national examination and job definition in Korea and compared the differences in the national examination between Korea and neighboring countries, such as Japan and Taiwan. In Korea, the number of questions made for it was 200 (1965), 200 (1977), 300 (1982), 250 (1992), 330 (2006), and 280 (2015). The practice of clinical physiology is important for real-time monitoring, given the characteristics of physiological testing. On the other hand, there are conflicts between other occupations in the working area. Clinical molecular biology needs to be established as a new major subject considering the diagnostic importance of molecular biological tests and the speed of science and technology development. Clinical laboratory operations provide policy and guidance recommendations to technologist staff. The proposed clinical laboratory technologists' national examination comprises major subjects: clinical biochemistry, clinical hematology, clinical transfusionology, clinical immunology, clinical microbiology, clinical molecular biology, clinical histology, clinical cytology, clinical physiology, and clinical laboratory operations. In addition, this study proposes the job definition of clinical laboratory technologists, revising various chemical or physiological testing to biomedical or physiological testing required for medical practice.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.635-642
• /
• 2003

The radical development of recent network technology provides the basic foundation which can establish a high speed and cheap cluster system. It is a general trend that conventional cluster systems are built as the system over a fixed level based on stabilized and high speed local networks. A multi-distributed web cluster group is a web cluster model which can obtain high performance, high efficiency and high availability through mutual cooperative works between effective job division and system nodes through parallel performance of a given work and shared memory of SC-Server with low price and low speed system nodes on networks. For this, multi-distributed web cluster group builds a sub-cluster group bound with single imaginary networks of multiple system nodes and uses the web distributed shared memory of system nodes for the effective data transmission within sub-cluster groups. Since the presented model uses a load balancing and parallel computing method of large-scale work required from users, it can maximize the processing efficiency.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.321-332
• /
• 2015

In an attempt to find the improvement of the fishing efficiency according to the hull form remodeling for the 3 tuna purse seiner, the Catch-Per-Unit-Effort (CPUE) for that undertaken before (2008) and after (2010) was analyzed. In addition, the CPUE of 6 similar ships operated same period and same fishing ground. As result, it came to verify that the three modified ships had a significant value on the CPUE. An another index for the improvement of fishing efficiency is the rate of reduction of fuel oil consumption for the modified ships. Fuel oil consumption per day in service speed as comparing with the original ships were reduced 2.1%, 4.0% and 5.1% on the modified ship A, B, and C respectively. And each ship's service speed was increased 1.0 kt, 0.6 kt, and 0.4 kt according to the modified ship A, B, and C in due order. In the conclusion, the remodeling job with newly equipped bulbous bow, lengthened slipway and enlarged rudder area were improved fairly much on fuel oil efficiency, the ship's speed, and in the end, that led to the improving fishing efficiency. Hence, the remodeling of tuna purse seiner come to improve not only the fishing performance, but contribute to the reduction of operating cost by saving energy for the fisheries industry.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.156-158
• /
• 2004

Film printing companies have many problems during a printing process. Most of all, even an insect or dirt stick to the transparent film may cause severe errors until the end of printing job, which means big economic damage to the company. To prevent some insect-dots or dirt-dots, we have to Inspect the total area of film. However, it is very difficult to inspect the film in real-time due to the high-speed of printing that usually more than 150 m/min. A hardware based approach, for example DSP-based approach can be the one of solution candidates, but the total cost and the complexity increases the very high-level. In this paper, we suggest a software based approach, using MMX technology, to inspect the film in real-time. By Many real-plant experiments, we can see the suggest approach is applicable for the inspection of food packaging film in real-time.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.5
• /
• pp.46-55
• /
• 1994

The purpose of this research is to construct experimental test set-up and to establish a series of performance test program for the domestically developed hydraulic couplings, and to provide a software to store and utilize these experimental data which can be used to improve the performance of the hydraulic coupling and solve the job problems confronted during operation. The performance test consists of measurement of torque, rpm and efficiency of the hydraulic coupling for three different amounts of working fluid with various loads to the output shaft, and investigating the torque, rpm and efficiency characteristics with respect to these parameters. The results of this study can contribute to the development of variable speed hydraulic coupling and torque converter pursued by the domestic industry.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.360-368
• /
• 1999

We consider the problem of scheduling n jobs with sequence-dependent processing times on a set of parallel-identical machines. The processing time of each job consists of a pure processing time and a sequence-dependent setup time. The objective is to maximize the total remaining machine available time which can be used for other tasks. For the problem, a hybrid genetic algorithm is proposed. The algorithm combines a genetic algorithm for global search and a heuristic for local optimization to improve the speed of evolution convergence. The genetic operators are developed such that parallel machines can be handled in an efficient and effective way. For local optimization, the adjacent pairwise interchange method is used. The proposed hybrid genetic algorithm is compared with two heuristics, the nearest setup time method and the maximum penalty method. Computational results for a series of randomly generated problems demonstrate that the proposed algorithm outperforms the two heuristics.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.158-165
• /
• 1996

The knowledge of air flow in an engine room has become more and more important in recent car design. The fluid flow in the engine compartment was investigated by numerical analysis. Due to the complex geometry of the engine compartment, mesh generation is a time-consuming job. In this research, the "ICEM" code was used to generate meshes by the Cartesian mesh model. The Reynolds-averaged Navier Stokes equations, together with the porous flow model for radiator and condenser, were solved. Computation was performed for the steady, incompressible, and high speed viscous flow, adopting the standard K-ε turbulence model. The "STAR-CD" code was used as a solver. The effect of car front openning area on the flow in engine room was also investigated.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.792-799
• /
• 2007

The purpose of this article is to depict the relationship between the frames of leadership and the dependent variables such as job satisfaction, respect from subordinates, and promotion speed of boss. To attain this purpose, for types of multiple leadership frames, such as structural, human resources, political, and symbolic frames were surveyed through questionnaire and analyzed by SPSS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.204-208
• /
• 1992

The purpose of this research is to construct the experimental test set-ups and establish a series of performance test program for the domestically developed fluid couplings, and to provide a software to store and utilize these experimental data which can be used to improve the performance of the fluid coupling and solve on the job problems confronted in operation. The performance test consists of taking measurement of torque rpm and efficiency of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft and finally investigating the torque rpm and efficiency characteristics of the fluid coupling with respect to these parameters. The results of this study can contribute valuable references tot the development of variable speed fluid coupling and torque converter currently pursued by the domestic industry.