• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.327-327
• /
• 1999

The oxidation behavior of 60%Cu-40%Zn brass haying small amounts of Zr, Cr, Mg, Al, and Si was studied between 873 and 1043 K in air. The alloying element of Mg was harmful, while other alloying elements were beneficial to oxidation resistance. Particularly, the simultaneous addition of Al and Si decreased the oxidation rate drastically. During oxidation, Zr formed ZrO₂, Cr formed CuCr₂O₄, Mg formed MgO, Al formed A1₂CuO₄, and Si formed amorphous SiO₂. These oxides were incorporated in the oxide scale composed predominantly of ZnO. The oxide scales formed on all the tested alloyswere prone to cracking, wrinkling, and spallation.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.271-271
• /
• 1999

A concentration change during grade transition operation in thin slab casting is investigated through computer simulation and the results are compared with experimental measurements. Fluid flow and mixing patterns in various tundish levers and flow rates were analysed by a three-dimensional mathematical model. Based on the contained results, a simple, efficient and accurate computational model is suggested to predict the concentration profile at the outlet of the tundish. Based on the model, mixing in and below the mold was analyzed considering electromagnetic braking force. The predicted concentration profiles show good agreements with the measured values. It is found that the lower vortices in the mold are suppressed by the electromagnetic field and a plug-like flow region develops, which decreases the intermixing of two different grades of steel and shortens the length of transition region.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.04a
• /
• pp.26-26
• /
• 2018

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1883-1886
• /
• 1997

3차원 유한요소법에 정합 조건을 구현하기 위해 유한한 두께를 갖는 흡수체을 이용하였다. 흡수체는 자유공간과의 경계에서 모든 입사각에 대해 무반사특성을 갖으며, 일단 흡수체 내로 전파된 파는 흡수체의 끝에 도달하기 전에 흡수체를 통과하면서 충분히 손실되도록 하였다. 이러한 흡수체는 ${\varepsilon}_r$과 ${\mu}_r$에 비등방복소주대각텐서를 사용하여 구현된다. 구현된 흡수체층은 구형도파관에 적용하여, 전파상수를 이용하여 정합시킨 경우와 결과를 비교하였다.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.107-122
• /
• 2004

This study aims to examine the usefulness on the Evaluation Process for the Feasibility & Priority of A Certain Public Projects. and the Methodology used AHP(Analytic Hierarchy Process) which used pairwise comparisons of the alternatives and criteria for solving discrete alternative multicriteria decision problems. In this paper, we present a similar phenomenon, rank reversal problem, when we apply the AHP to group decision making process. The problem is identified by an example problem in that the previous rank order of Public Projects choices. we also present three different methods to prevent the undesirable characteristic of the original AHP in appling to Decision Making Process.

• Journal of Oriental Medical Thermology
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2011

Purpose : The purpose of this study is to know the therapeutic effect of herbal-acupuncture on shoulder pain from calcific tendinitis. Methods : The patient who have the calcific tendinitis was treated by herbal-acupunture on 6 acupoints around right shoulder. The shoulder pain and dysfunction was assessed by visual analogue scale(VAS). UCLA Shoulder rating Scale. and SPAI scale. Results : After treatment. all scales showed slightly improvement.. Conclusion : Herbal-acupuncture on shoulder joint was effective in short term study. We need more further study.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.99-101
• /
• 2005

This paper deals with drive characteristics of LSRM according to position detection angle. Position of LSRM detected approximation sensor. Position choose mover of LSRM and inductance. When approved current in each phase by decided position, we made sure current and voltage according to turn-on, turn-off.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.105-107
• /
• 2005

A high-speed brushless DC motor for a 50-kW, 70-krpm turbo-compressor was developed based on a 2-D analytical method, of which design was verified using the FE analysis. A prototype machine was also fabricated and tested to confirm the analytical design. Preliminarily obtained experimental data using the prototype machine shows the validity of the analytical approach.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.318-327
• /
• 2010

This paper deals with analysis on dynamic characteristic and circuit parameter of linear switched reluctance motor by electromagnetic analytical method. Above all, using space harmonic method, which is electromagnetic method, the air-gap flux density is analyzed in the both align and unaign positions, and the inductance profile, force characteristic and resistance per phase are calculated by means of the process. The validity of the analyzed results are demonstrated by the finite element method(FEM) and manufacture of the prototype machine. Second, the dynamic simulation is analyzed by the use of circuit parameters derived from analytical method, and the operating system of the prototype machine is manufactured to demonstrated the validity of simulation analysis. As a result, it is considered that the characteristic equation suggested in this paper will contribute to the design, analysis and application of LSRM.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.119-122
• /
• 2000

본 논문에서는 MPEG-2 AAC 디코더를 고정소숫점 DSP 프로세서로 구현할 때 연산 구조에 따른 연산량 및 메모리 소요량 등의 측면에서의 최적 구현구조를 도출하고자 하였다. 이를 위하여 본 논문에서는 AAC의 주요 기능블록들인 inverse quantizer, predictor, TNS, IMDCT/Windowing등을 대상으로 연산 비트수 및 데이타 표현 구조에 따른 디코더의 성능 변화를 시뮬레이션 한 후 이를 통해 얻어진 결과를 적용하여 16 비트 Teaklite DSP 프로세서 상에서 AAC 디코더를 구현하였다. 구현한 디코더는 일정수준의 음질을 유지하면서도 경제적인 메모리 소요를 보였으며 실시간으로 동작하는 것을 확인하였다.