• Annual Conference of KIPS
• /
• 2008.05a
• /
• pp.339-342
• /
• 2008

최근 기업들은 소프트웨어의 품질, 개발 속도, 비용 등의 문제에 대한 해결을 위해서 오픈소스 소프트웨어를 활용한 개발 방법을 사용하고 있다. 이에 따라 OSS를 비롯한 오픈소스에 대한 여러 분석이 있었지만, OSS를 활용할 때 이에 따른 비용이 줄어들 것이다라는 예상은 많았지만, 그것을 실제로 증명할 만한 사례나 연구는 현재까지 많이 존재하지 않았다. 본 연구에서는 OSS를 활용하기 위한 비용요소 및 범위를 제시하고 실제 사례를 통해서 각 비용을 구해서 이에 대한 적절성 및 분석을 수행하고 향후 연구를 제시한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1905-1910
• /
• 2013

This paper demonstrates the result of Safety Integrity Level (SIL) allocation for IL-type Train Control System(IL-TCS), by applying the semi-quantitative approach. IL-type TCS is defined in this paper as the set of Hardware and Software ATS equipment, Track-side ATP equipment, On-board ATP equipment, Track-side ATO equipment, On-board ATO equipment. SIL allocation is performed for these constituent subsystems of TCS. Based on three principles of the semi-quantitative method, the SIL allocation process is performed for the subsystems composing TCS.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.7
• /
• pp.925-930
• /
• 2013

The fault current of the power transmission system is greater than that of the power distribution system. Therefore, the introduction of superconducting fault current limiter (SFCL) is more needed to reduce the increased fault current. The trigger-type SFCL consists of the high-temperature superconducting element (HTSC), the current limiting reactor (CLR) and the circuit breaker (CB). The trigger-type SFCL can be used to supplement the disadvantages of the resistive-type SFCL. The operation characteristics of the current ratio differential relay which is usually applied to the protection device of the power transmission system are expected to be affected under fault conditions and the applicability of the trigger-type SFCL. In this paper, we analyzed the operating characteristics, by the fault conditions, between the current ratio differential relay for line protection and the trigger-type SFCL in the power transmission system through the PSCAD/EMTDC simulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.75-80
• /
• 2012

In this paper, the operational characteristics due to the introduction of the superconducting fault current limiter(SFCL) with a peak current limiting function were analyzed in the power distribution system. The parallel structure of the superconducting element can operate the peak current limiting function depending on the transient amplitude of fault current. We studied the operating characteristics of the introduction of the SFCL with a peak current limiting function in the power distribution system. Furthermore, we were analyzed between the SFCL with a peak current limiting function and the protection devices in the power distribution system, through the short circuit experiments.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.47-50
• /
• 2005

In this paper, we investigate a filtering technique to reduce the adverse effect of long motor leads on H-bridge cascaded 7-level inverter fed ac motor drive. The switching surge voltage becomes the major cause to occur the insulation failure by serious voltage stress in the stator winding of high voltage induction motor. However, the effect of switching surge appears un seriousin high voltage induction motor than low voltage induction motor. Consequently, we demonstrated that the filter connected to the motor terminals greatly reduces the transient voltage stress and ringing, moreover we show lowers the dv/dt of the inverter switching pulse. The results of simulation show the suppression of dv/dt and the reduced peak voltage at the motor end of a long cable.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.781-783
• /
• 2005

직접부하제어를 효율적으로 운용하기 위해서는 우리나라의 계통상황을 면밀히 분석하여 전력수급의 비상시에 부하차단이 필요한 지역과 필요 없는 지역에 대한 판단이 필수적이다. 계통에서 요구되는 부하 차단량을 산정하기 위해서는 현재의 계통상황과 미래의 계통의 변화를 면밀히 관찰해야 하며 이를 효과적으로 확보하기 위한 명확한 시행절차가 필요하다. 하지만 현재 직전부하제어를 위한 약정체결은 한국전력공사와 에너지 관리공단에서 각자 진행하는 이원화 시스템으로 구축되어 있다. 그래서 본 논문은 2002년부터 2004년까지 두 기관의 약정체결 현황과 부하특성을 파악하고 분석하였다. 이 결과는 향후 직접부하제어의 최적부하배분 알고리즘 수립에 적용될 것이며 또한 향후 직접부하제어 약정부하의 신규발굴과 약정체결에 있어 참고자료가 될 수 있을 것이다.

• Annual Conference of KIPS
• /
• 2017.11a
• /
• pp.407-410
• /
• 2017

본 라이선스 통합관리시스템은 사용자에게는 소프트웨어 라이선스의 간편한 인증 요청과 재인증 절차를 제공하고 라이선스 발급하고 인증하는 관리자는 사용자의 현황 파악이 가능하며 언제 어디서나 간편하게 라이선스를 제공하여 많은 시간을 단축하고 라이선스 관리 비용을 절감한다. 효율적인 소프트웨어 인증관리시스템의 개발로 소프트웨어 불법적인 사용을 방지하여 건전한 생태계를 조성할 수 있다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.853-855
• /
• 1996

This paper describes the dissipation factor measuring techniques of insulating oil on the operating transformer by using digital signal processing. After applying voltage to the electrodes which is installed In a transformer, acquiring source voltage and current of electrodes and using cross-correlation techniques. we can check the dissipation factor of insulating oil. To Improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and analog filter and software such as cross-correlation techniques, rectangular window, and digital filtering techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with schering bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.270-272
• /
• 1996

This paper describes the dissipation factor measuring techniques of insulating oil on operating pole transformer by using digital signal processor. After applying voltage to the electrodes which is installed in a transformer, acquiring source voltage and current of electrodes and using cross-correlation techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and software such as cross-correlation techniques and rectangular window techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with schering bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.63-65
• /
• 2004

The recent advancement in the power electronic technique has increased the use of induction motor fed by inverter using high-frequency switching devices. Also the tendency is toward larger size and higher voltage. Therefore, The IGBT (Insulated-Gate Bipolar Transistor) that is high switching frequency element has been using increase. But, The switching surge voltage was occurred by high switching frequency of inverter has appeared a voltage doubling in the motor input terminal due to mismatching of cable characteristic impedance and motor characteristic impedance. Actually, The Switching surge voltage became the major cause to occur the insulation failure by serious voltage stress in the stator winding of induction motor. The short during rise time of switching surge and cable length is increased, the maximum transient voltage seen at the motor terminals increases. In this paper, Analyzed switching surge transient voltage of power cable pulling is used EMTP(Electromagnetic Transient Program) at the induction motor terminal and in cable.