• 제목/요약/키워드: JES Method

검색결과 269건 처리시간 0.023초

Characteristics of deodorization for malodorants in aqueous solution by sonication

  • Yoo, Young-Eok;Maeda, Yasuaki
    • 한국환경과학회지
    • /
    • 제13권2호
    • /
    • pp.167-173
    • /
    • 2004
  • A aqueous solution of malodorants (i.e., n-valeraldehyde, n-valeric- acid, 2-methylisoborneol, and trimethylamine) was exposed to 200KHz ultrasound with a power of 6.0W/$\textrm{cm}^2$ per unit volume in a sonochemical reactor under room temperature and atmospheric pressure condition. The concentration of malodorants decreased with irradiation time, indicating pseudo-first-order kinetics. The removal efficiency of malodorants was about from 50% to 96% decomposed after 90 minutes sonication. At the deodorization, it was determined by triangle odor bag(TOB) method for odor sensory measurement, and it indicated that over 60% of relative odors were deodorized with degradation by the sonication.

졸-겔법으로 합성된 폴리이미드/실리카 복합체의 환경적 물성에 관한 연구 (A Study on the Environmental Properties of Polyimide/Silica Composites Prepared by Sol-Gel Method)

  • 박성수;홍성수;이성환;김성완;박재현;김지경;박희찬
    • 한국환경과학회지
    • /
    • 제12권4호
    • /
    • pp.481-485
    • /
    • 2003
  • Two types of polyimide/silica composite films were prepared using sol-gel method through hydrolysis and polycondensation of tetraethoxysilane (TEOS) with the polyamic acid (PAA) and end-capped PAA solution. Samples were characterized by the means of differential thermogravimetry, X-ray diffractometry, scanning electron microscopy, universal test, impedance analyzer, chemical resistance test, etc. All of the PAA/silanol solutions heat-treated at 300$^{\circ}C$ for 6h were transformed to polyimide/silica composites. It has been demonstrated that the properties of polyimide/silica composites were affected by the amount of silica addition and the bend type existed between polyimide and silica.

Estimation of Source Contribution for PM10 by Chemical Mass Balance(CMB) in Busan

  • Jeon, Byung-Il;Lee, Young-Mi
    • 한국환경과학회지
    • /
    • 제17권4호
    • /
    • pp.359-364
    • /
    • 2008
  • PM10 samples were collected from July 2007 to Oct. 2007 at Gwaebopdong(inland area) and Dongsamdong(coastal area), in Busan. This paper investigates the contribution of emission sources to PM10 mass in Busan. Source apportionment results derived from the chemical mass balance(CMB) method. A source profiles applied in this study is organized to minimize the collinearity among sources type via statistical method. Source profiles applied in this study utilized a measured value of fine particle directly sampled from metropolitan area such as Seoul and Incheon, After a CMB modeling, sulfate and nitrate related sources among those contributing to PM10 in Busan showed high contribution by 36.53% in Gwaebopdong and 42.02% in Dongsamdong.

Evaluation of a Large Space Indoor Air Flow Controling System with a CFD code for Enhancing indoor Environment

  • Chung Yong-Hyun;Onishi Junji;Soeda Haruo;Kim Dong-Gyu
    • 한국환경과학회지
    • /
    • 제14권1호
    • /
    • pp.1-8
    • /
    • 2005
  • CFD code are used for numerically testing a new concept of large space air control system. A workshop with air-conditioners products lines and air-conditioned by several floor type air-containers is tested. The whole room air distribution is controlled by boosters installed in a middle height horizontal plane. First, calculated results are compared with measured data to confirm the validity and applicability of the prediction method. Next, the method is applied to case studies heating seasons. Results under some operating conditions show effectiveness in avoid the temperature stratification in winter.

Study of Block-formed Retaining Wall for Reducing Construction Waste

  • Kim, Chun-Ho
    • 한국환경과학회지
    • /
    • 제11권11호
    • /
    • pp.1183-1187
    • /
    • 2002
  • Existing retaining walls are usually made from only one cast form and any damage must be promptly repaired. However, when a part of a retaining wall is repaired, a gap can be created between the repaired and existing parts, along with an unpleasing visual effect. As such, the whole structure is often reconstructed, rather than repairing one part, resulting in construction waste and possible contamination of the environment. Accordingly, the current study proposes a construction method for a retaining wall that uses separate blocks to downsize of quantity of construction waste. In addition, by changing the color or modifying the block cover a more environmentally friendly retaining wall construction method is achieved.

마이크로파 용융삽입법을 이용한 생분해성 나노복합체의 제조 (Fabrication of Biodegradable Nanocomposite Using Microwave Melted Intercalation Method)

  • 하원조;신준식;송승욱;김준호;손세모;박성수
    • 한국환경과학회지
    • /
    • 제13권4호
    • /
    • pp.429-434
    • /
    • 2004
  • The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at 13$0^{\circ}C$ for 30min with various content of clay by melt-intercalation method under classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry(XRD), thermal gravimetric analysis(TGA), and rheometric dynamic analysis(RDA). It was found that intercalated or exfoliated state was obtained in the samples according to the condition of organic modification, clay content, and heating source.

토양오염 복원을 위한 EMPLUX를 사용한 새로운 방법에 대한 연구 (A Study on the New Method by EMPLUX for Soil-Remediation(1))

  • 김정성
    • 한국환경과학회지
    • /
    • 제16권12호
    • /
    • pp.1325-1335
    • /
    • 2007
  • The utility of soil-gas surveys is directly proportional to their accuracy in reflecting and representing changes in the subsurface concentrations of source compounds. Passive soil-gas vapor-phase is merely a fractional trace of the source, so, as a matter of convenience, the units used in reporting detection values from EMFLUX surveys are smaller than those employed for source-compound concentrations. According to the Leaking Underground Storage Tank(LUST) Program Annual Report, approximately 16 U.S. million dollars were spent for environmental site investigations at over 1,600 Underground Storage Tank(UST) sites and approximately over 1,000 acres of land was characterized and remediated in the State of Illinois in the year of 2003 alone. The main purpose of this study is to propose an idea to significantly reduce the site investigation cost by utilizing a passive soil-gas survey and conventional intrusive drilling method and to fully define the three dimensional characteristics of subsurface contamination from two industrial drycleaning facilities.

위성사진을 이용한 도시하천 홍수범람도 작성에 관한 연구 (A Study of Make Inundation Map Using Satellite Photograph at Urban River)

  • 박기범;김성원
    • 한국환경과학회지
    • /
    • 제20권2호
    • /
    • pp.199-205
    • /
    • 2011
  • This study used to the satellite photograph and drew up a flood inundation map. To past used digital map and showed reflect the inundation map and change of the city was difficult. The acquisition of the satellite photograph is easy from internet Site of Korea and is updated quickly. So, used the satellite photograph from flood inundation drawing up of existing and reflected the change of the city. Drawing up method of the inundation map in compliance with the research which sees the reflection of the land use which is actual is possible. Results of HEC-RAS with depth and an inundation location to be show easily. But there is to a combination method of the satellite photographs and GIS data and more objective and the subject the development of the technique which has reached fixed quantity must be researched continuously judges.

미생물을 이용한 미역줄기에서 알긴산염 추출 및 저분자화 (Extraction and Degradation of Alginate from Brown Seaweed Stem Using Microorganism)

  • 안성준;김영숙;박권필
    • 한국환경과학회지
    • /
    • 제13권12호
    • /
    • pp.1139-1144
    • /
    • 2004
  • We studied a extraction and degradation of alginate from seaweed-stems using microorganism DS-02. DS-02 has a maximum growth rate at $30^{\circ}C$ and the enzyme has a maximum activity of alginate extraction at $35^{\circ}C.$ The yield of alginate extraction using DS-02 is about $16.0{\%}$ for 3.0 hour and molecular weight of the alginate decreased to about 1/8 of initial value after 24 hour extraction. Alginate extraction method by DS-02, compared with general alkali-extraction method, has an advantage of decreasing the molecular weight of alginate during extraction.

고체상미량분석법(SPME)을 이용한 GC/FID에서 PCE 및 TCE 최적 분석법 (The Optimal Analytical Method for the Determination of PCE and TCE by GC/FID with SPME technieque)

  • 안상우;이시진;장순웅
    • 한국환경과학회지
    • /
    • 제13권10호
    • /
    • pp.903-909
    • /
    • 2004
  • A new method based on solid phase microextraction(SPME), coupled with GC/FID, has been developed for the determination of PCE and TCE in water samples. The experimental parameters affecting the SPME process (i.e, kinds of fibers, extraction time, desorption time, extraction temperature, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. The coefficients of determination ($R^2$) for PCE and TCE were 0.9951 and 0.9831, respectively when analytes concentration ranges from 10 to 300$\mu$g/L. The relative standard deviations were 3.4 and $2.1\%$ for concentration of 10$\mu$g/L(n=5), respectively. The detection limits of PCE and TCE were 0.5 and l.3$\mu$g/L, respectively.