DOI QR코드

DOI QR Code

Evaluation of a Large Space Indoor Air Flow Controling System with a CFD code for Enhancing indoor Environment

  • Chung Yong-Hyun (Division of Environmental Engineering, Pukyong National University) ;
  • Onishi Junji (Dept. of Intelligent Machine Engineering, Osaka Electro-Communication University) ;
  • Soeda Haruo (Dept. of Intelligent Machine Engineering, Osaka Electro-Communication University) ;
  • Kim Dong-Gyu (Global Environmental Eng)
  • Published : 2005.01.01

Abstract

CFD code are used for numerically testing a new concept of large space air control system. A workshop with air-conditioners products lines and air-conditioned by several floor type air-containers is tested. The whole room air distribution is controlled by boosters installed in a middle height horizontal plane. First, calculated results are compared with measured data to confirm the validity and applicability of the prediction method. Next, the method is applied to case studies heating seasons. Results under some operating conditions show effectiveness in avoid the temperature stratification in winter.

Keywords

References

  1. Onishi, J., H. Soeda, S. Nakamura, K. Mori, Y. H. Chung and H. Kimoto, 2002, Development of numerical method for estimation of energy consumption in various residential houses including passive solar ones, in Proceedings of EuroSun2002 Scientific-Technical congress & Ploicy Forum on Renewable Energy for Local Communities of Europe(Toward Rio +10), ISES, bologna, paper76
  2. Onishi, J., H. Soeda and M. Mizuno, 2000, Numerical Study on a Low Energy Architecture based upon Distributed heat storage system, Renewable energy, 22, 61-66
  3. Onishi, J. and S. Tanaka, 1990, Applicability and limitations of a numerical method in thermal environment analysis for air-conditioned rooms, in Proceedings of the Room-Vent '90, AI-6, 1-15
  4. Onishi, J., S. Koga, M. Mizuno, N. Takeya and K. Kitagawa, 1998, Computer Effort saving Methods in Unsteady Calculations of Room Airflows and Thermal Environments, in Proceedings of the RoomVent '98 6th International Conference on Air Distribution in Rooms, Stockholm, 117-123pp
  5. Onishi, J., N. Takeya and M. Mizuno, 1995, Study on numerical prediction methods for indoor airflow and thermal environments(Part 1), Transactions of SHASEJ, 55, 23-34
  6. Launder, B. E. and D. B. Spalding, 1972, Mathematical Models of Turbulence, Academic Press, London, 269pp
  7. Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, McGraw-Hill, 130pp
  8. Onishi, J., S. Tanaka and M. Naito, 1988, Numerical Prediction of Room Air Distributins- Effects of calculation procedures at Fluid-Solid interfaces, in Proceedings of the ASHRAE symposium on Building systems, Illinois, 161-168pp
  9. Ishida, H. and J. Onishi, 1993, Study on Enhanced Calculation using Locally Mesh Refmement with SIMPLE method, in Proceedings of 7th CFD symposium, Tokyo, 475-478pp