• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1998-2000
• /
• 2005

The effects of the addition of nanocrystalline Y2O3 powder on the microstructure and superconducting properties have been investigated in YBCO films prepared by TFA-MOD process. Precursor solution doped with extra $Y_2O_3$ Powder was prepared by adding $Y_2O_3$ powder into a stoichiometic precursor solution with a cation ratio of Y:Ba:Cu=1:2:3. Coating solutions with and without $Y_2O_3$ doping were coated on $LaAlO_3(100)$ single crystal by a dip coating method, cacination and conversion heat treatments were performed at the controlled atmosphere containing water vapor Current carry capacity(Jc) of YBCO film was enhanced about 50% by $Y_2O_3$ doping. It is thought that the enhancement of Jc is due to the better connectivity of YBCO grains and/or the flux pinning by the presence of nanocrystalline $Y_2O_3$ Particles embedded in YBCO grains.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.15-18
• /
• 2006

REBCO coated conductors (RE: rare earth elements) have recently drawn great attention since they are known to possess stronger flux pinning centers in high magnetic fields compared with YBCO coated conductors. In this study, $GdBa_2Cu_3O_{7-d}(GdBCO)$ was selected to investigate the influence of the distance between target and substrate and substrate temperature on the superconducting properties of GdBCO films on the $SrTiO_3(100)$ substrate. Samples were fabricated by pulsed laser deposition (PLD) with a Nd:YAG laser (355nm). Under a given oxygen pressure of 800mTorr, we changed the distance between target and substrate from 5.5cm to 7.0cm and the substrate temperature from $750^{\circ}C\;to\;850^{\circ}C$. The crystallinity and texture of GdBCO films were analyzed by X-ray diffraction (XRD), and the surface morphology was observed by the scanning electron microscopy (SEM). Tc and Jc values were measured by the four point probe method. High quality GdBCO films with Tc of 89.7K and Jc over $1MA/cm^2$ at 77 K in self field were successfully fabricated by optimizing processing parameters. The detailed processing conditions, microstructure and superconducting properties will be presented for a discussion.

• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1083-1091
• /
• 1997

As one of the chemical powder fabrication methods, the powder preparation method by using oxalate has the following advantages; (1) easy to control the chemical stoichiometry, (2) easy to fabricate homogeneous and fine particles, and (3) easy to be thermaly decomposed at low temperature. In the present study, the initial morphology and size distribution of the powder were controlled and the homogeniaty was improved. By carefully controlling the pH with NH4OH, the Bi(Pb)-Sr-Ca-Cu-O superconducting powders were prepared and investigated for their properties. The microstructures and the superconducting properties of the pelletized samples were investigated. Also, the microstructures and electrical properties of the samples prepared by tape casting method were investigated. The fabricated powders were spherical with less than 400 nm, but most of them were agglomerated to be 1~3 ${\mu}{\textrm}{m}$ in size. The critical temperature of the pelletized sample annealed at 84$0^{\circ}C$ for 72 hours in air was 110K. And the critical currents of annealed samples in air prepared by tape casting process for 24 hours and 72 hours were 0.6 A (Jc=600A/$\textrm{cm}^2$) and 1.9A (Jc=1, 900A/$\textrm{cm}^2$) respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.21-24
• /
• 2002

Two kinds of $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$, the sintering samples and zone melting samples, were heat-treated under pure Ar at 950$^{circ}C$. The substitution of Nd ion for Ba ion in the $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$ before and after the heat treatment was investigated by XRD. In order to confirm the effects of the heat treatment, the Tc and Jc of samples with/without the heat treatment under Ar were comparatively studied. $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$ samples were oxygenated under pure oxygen at $300^{circ}C$. From the XRD pattern it was found that the sample with x<0.4 was transferred from tetragonal phase to orthorhombic phase after the oxygenation, while the sample with x>0.4 did not show the phase transition even after a long time oxygenation. Therefore, the low oxygen partial pressure (Ar+1 % O$_2$) was used for the ambient atmosphere of the zone-melting samples, which could reduce the melting temperature and depress the substitution of Nd for Ba. After the improvement in the zone-melting process, the Jc value was increased to 2 x $10^4$A/$cm^2$ (0 T, 78 K). The particle orientation and the structure of zone-melted NdBaCuO were studied by the XRD and SEM analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.56-62
• /
• 2010

The purpose of this study was to compare the difference of driving pattern between male and female drivers for a straight driving and unexpected situation using driving simulator and motion data. The participants included total 60 university students; 30 males aged 24.3$\pm$1.4 years and 30 females aged 23.2$\pm$1.9 years with 1~3 years of driving experience. The driving task required participants to keep the constant distance (20m, 25m or 30m) with preceding vehicle running at 55~65km/hr speed using driving simulator which was programed unexpected situation for two minutes. Simulator and motion data were acquired. The acquired data was divided in straight driving block for 40 second and unexpected situation block for 2 second. The coefficient of variation (CV) of lane keeping and jerk-cost (JC) function were analyzed for straight driving and unexpected situation blocks. The results show that CV was smaller in males than females for both straight and unexpected situation blocks (p < .05). JC was smaller in females than males for both straight and unexpected situation blocks. As the distance of vehicles become longer, JC was smaller for both male and female (p < .05).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.3
• /
• pp.14-18
• /
• 2023

White leg shrimps cultured in an inland private aquaculture farm with low salinity waters showed abnormal swimming behavior and appetite reduction in July 2022. Then, gradual mortality was observed in the aquaculture farm. During the diagnosis, bacterial strain KNUAF-SHP3 was isolated from the hepatopancreas of the dead shrimps. Based on the sequence of 16S rRNA gene, KNUAF-SHP3 was proved to be Shewanella sp., clustering into a group with S. algae MARS 14 and S. chilikensis JC5T. According to the result of experimental infection test, all shrimps challenged with high concentrations, 2.1×108 CFU/ml and 2.1×109 CFU/ml showed apparent disease symptoms and the cumulative mortality rates reached 100% in 7 days post challenge. These results emphasized that Shewanella isolate in this study can be a potential pathogen of white leg shrimp cultured in low salinity water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.4
• /
• pp.364-370
• /
• 1987

A lysozyme is isolated and purified partially form the egg white of Korean native Ogol fowl(Natural monument No. 265) by the method of direct crystallization. The bacteriolytic activities of 1% lysozyme against Staphylococus aureus 57, Bacillus subtilis ATCC 6633, and Escherichia coli NIHJ-JC2 was investigated with or without some other antibacterial materials in the nutrient broth culture. According to the results, 1% lysozyme showed the appreciable bacterolytic activities of about 12-16% to the almost of bacteria cultured. The synergistic effect with the lysozyme and some antibacterial materials on the growth inhibition of the bacteria cultured exhibited higher in order of the 0.001% magnolol -22%, the 0.001% honokiol -14% against S. aureus and of the 0.0005% erythromcin -29%, the honokiol -22%, the magnolol -l7%, the 0.005% phospholipase -6% against E. coli. And that synergistic effect against B. subtilis showed a fairly high level of about 52% with the erythromycin but not any effect with others.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.17-28
• /
• 2010

A climbing lane is installed to separate low-speed traffic from high-speed traffic if drastic traffic capacity reduction is expected due to a large number of vehicles that slow down in the upward section. Existing studies on climbing lanes have focused on the designation, location of starting and ending points, and installation method of climbing lane with regard to road design standards. However, in terms of traffic operation, it was known that the climbing lanes cause traffic congestion due to the increase of traffic volumes. In this regard, this study aims to establish traffic operational guidance as to how much effects temporary closure of climbing lanes can have on traffic improvement according to the volume-capacity ratio, grade, and composition of trucks. A test section of simulated climbing lane was selected in Nakdong JC bound for Masan(136.9K~133.3K, 3.6km, 3.7%) on Jungbunaeryuk expressway to conduct VISSIM analyses, microscopic traffic simulation based on such control variables as traffic volume(v/c), grade and the trucks ratio. As a result of the analyses, it has been found that v/c and the ratio of trucks are the key variables for efficient traffic management of climbing lanes in order to relieve traffic congestion via climbing lane. If ratio of trucks are more than 50% and when v/c would be 0.8, both climbing lane would be closed and non-operated regardless of grade and ratio of trucks when v/c is 1.0. With the increased traffic due to a five-day work week system, continued peak hours during the weekday, increased and various patterns of congestion on expressway, this study would be expected to contribute to facilitating researches on flexible operational standards for road facilities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.25-32
• /
• 2009

Currently, various types of TDM (Transportation Demand Management) policies are being studied and implemented in an attempt to overcome the limitations of supply oriented policies. In this context, this paper addressed issues of effectiveness and possible domestic implementation of the HOT lane. The possible site of implementation selected for this simulation study is part of the Kyung-bu freeway, where a dedicated bus lane is currently being operated. Minimum length of distance required in between interchanges and access points of the HOT lane for vehicles to safely enter and exit the lane, and traffic management policies for effectively managing the weaving traffic trying to enter and exit the HOT lane were presented. A 5.2km section of freeway from Ki-heuing IC to Suwon IC and a 8.3km section from Hak-uei JC to Pan-gyo JC have been selected as possible sites of implementation for the HOT lane, in which congestion occurs regularly due to the high level of travel demand. VISSIM simulation program has been used to analyze the effects of the HOT lane under the assumption that one-lane HOT lane has been put into operation in these sections and that the lane change rate were in between 5% to 30%. The results of each possible scenario have proven that overall travel speed on the general lanes have increased as well by 1.57~2.62km/h after the implementation of the HOT lane. It is meaningful that this study could serve as a basic reference data for possible follow-up studies on the HOT lane as one effective method of TDM policies. Considering that the bus travel rate would continue increase and assuming the improvement in travel speed on general lanes, similar case study can be implemented where gaps between buses on bus lane are available, as a possible alternative of efficient bus lane management policies.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.1-11
• /
• 1998

We present somple block methods for blind maximal ratio combining (MRC) based on a maximum likelihood (ML) principle and finite alphabet properties (FAP) inherent in digital communication systems. The methods can provide accurate estimates of channel parameters even with a small subset of data, thus realizing nearly perfect combining. The channel parameters of diversity branches and the data sequence are estimated simultaneously by using an alternating projection technique. Two different methods, that is, (1) Joint combining and data sequence estimation(JC-DSE) method and (2) Pre-combining and blind phase estimation (PC-BPE) method are presented. Efficient initiallization schemes that can assure the convergence to the global optimum are also presented. Simulation results demonstrate the performance of two methods on the symbol error rate (SER) and the estimated accuracy of the channel parameters.