• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.339.2-339.2
• /
• 2016

본 연구에서는 Ti/Al/Ti 금속 배선의 Electro-Migration(EM) 현상을 분석했다. Van der Pauw, Greek Cross bridge, Straight line linear line bridge를 결합한 패턴을 제작하여, 온도 변화에 따른 EM의 발생 시간(Failure Time)을 측정했다. 측정 조건은 W/L=3.5/300 um 소자에 전류 밀도(current density)를 $J=10^4A/cm^2$로 고정하고, 온도를 300 K, 350 K, 400 K로 가변 시켰다. 측정된 Cumulative Failure의 50 % 되는 지점(Median Time To Failure; MTTF)은 각각 22.3시간, 18.46시간, 15.4시간으로 온도가 300 K에서 400 K로 증가함에 따라 MTTF가 6.9시간 감소했다. 이 결과를 통해 Black방정식에서 온도 변수가 $t_{50}$에 영향을 주는 것을 확인했다. 온도가 증가함에 따라 더 많은 전자들이 원자에 충돌하면서 운동량을 전달하고, 더 많은 원자들이 이주되면서 EM 발생 시간이 감소했다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.326-332
• /
• 2008

In this work CdS films were prepared by using chemical bath deposition, which is simple and inexpensive technique suitable for large deposition area. Annealing in air at different temperatures (300, 350, 400, 450 and $500^{\circ}C$) at constant time of 30 min, also for different times (15, 30, 45, 60 and 90 min) at constant temperature ($300^{\circ}C$) is achieved. X-Ray analysis has confirmed the formation of cadmium oxide (CdO) with slight increase in grain size, shift towards lower scattering angle due to relaxation in the tensile strain for deposition films, and structure change from cubic and hexagonal to the hexagonal. From electrical properties, significant increase in electrical conductivity appeared in samples annealed at $300^{\circ}C$ for 60 min, and at $350^{\circ}C$ for 30 min.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.149-153
• /
• 2003

In this paper, the design and implementation of a high power(300W) forward converter using a planar transformer is presented. The overall size and volume of the converter is decreased by replacing a planar transformer in stead of using a conventional winding transformer. Due to the decreased size and volume, power density of the applied forward converter is increased. Also, in this paper, the 300W ZVS forward converter with active clamp snubber circuit is compared to the 300W hard switching forward converter.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2026-2028
• /
• 2000

As the results of evaluation of its performance for 300 kN Ball and Socket type suspension insulators. There was electrically internal puncture of the solid insulating body of the insulating due to the steep front impulse voltage, which usually occurs puncture before external flash-over of insulators, moreover we have obtained satisfactory results in power arc test of 7.2kA cycle fatigue test with high qualify control index of 4.6, especially we have obtained more satisfactory results than that before improvement of its materials.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.988-989
• /
• 2008

This paper describes a rapid pulsed power charging system for pulsed power application. It is capable of charging 35kJ/s energy up to 0.47uF 25kV within 3ms and maximum pulse repetition rate of 300 pps can be achieved. The charger is designed based on three-phase series resonant inverter followed by air cooled set-up transformers thus it has many advantages of lower weight, small size and high efficiency compared with large bulky traditional pulse charger system. Detail design procedure of resonant inverter and high voltage transformers is explained. Experimental results carried out at different condition and its results shows 90% efficiency at full load condition.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1692-1695
• /
• 1997

This paper describes the relationship between the various non-destructive parameters and the breakdown voltage for the 17 kV, 300 MVA and the 22 kV, 500 MVA generators stator bars with polyester and epoxy/mica insulation respectively. Also, this study reports the results of an investigation into the factors which can assess the insulation condition of generator stator winding. Furthermore, a new parameter, Partial Discharge Index(PDI), is introduced as the valuable parameter for the assessment of insulation condition. The ratio between partial discharge increment and the stepwise voltage increment from the Discharge Inception Voltage (DIV) at the characteristic or resonant frequency band shows the close relationship between the breakdown voltage and PDI.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.143-151
• /
• 2008

This study was conducted to identify the correlation of bacterial phytase ($Transphos^{(R)}$) to the calcium level in feed. Of all 21-week-old 720 HyLine brown laying hens, 2 birds of similar weight were placed on each individual cage. The experiment was conducted by $3{\times}2{\times}3$ factorial design with including 3 different levels of phytase (0, 300, and 1,000 DPU/kg), 2 different levels of calcium (3.5% and 4.0%), and 3 different levels of no NPP addition 0% (0.095 NPP), 0.5% (0.185% NPP), and 1.0% (0.275% NPP). The feeding trial maintained the ME level of 2,800 kcal/kg and 16% for crude protein. The diet was fed ad libitum and 17 hours of lighting was provided throughout the experimental period. Egg production seemed to increase, in the 300 DPU of bacterial phytase added group and the cracked egg tended to reduce in Transphos added group. The egg productivity between treatment groups did not show significant difference by dietary calcium level, whereas non NPP added group (0.095% NPP) was found to be low compared to NPP added groups (P<0.05). The highest mean egg weight and the highest daily egg mass were detected in 300 DPU phytase added group. Although the mean egg weight was significantly higher in treatment groups fed with 3.5% calcium containing feeds (P<0.05), daily egg mass was no among treatment groups. The mean egg weight and daily egg mass were the lowest in non NPP added group (0.095% NPP) compared to other treatment groups (P<0.05). The feed intake showed similar pattern regardless of the bacterial phytase and calcium levels in the diet. However, the treatment groups fed diets containing NPP level of 0.275% and 0.165% showed significantly higher feed intake than the group fed with 0.095% NPP (P<0.05). Although the feed conversion was not affected by calcium and NPP levels in the diet, the most improved result was obtained from 300 DPU phytase added group (P<0.05). The eggshell breaking strength and thickness increased as dietary calcium level increase the level of calcium increases in diet. The treatment groups fed diet containing 0.275% and 0.165% NPP revealed to show improvement in eggshell breaking strength and yolk color index compared to the NPP non added (0.095% NPP) treatment group. The result of the present study suggests that the appropriate level of microbial phytase is 300 DPU and at this level, tricalciumphosphate supplementation in feed can be reduced to 40% of NRC recommendation. Higher calcium level in feed fail to show synergistic effect by adding microbial phytase.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.297-300
• /
• 2008

In this paper, a simple and computationally efficient approach to non-isothermal three-dimensional analysis of hot forging processes is presented based on rigid-thermoviscoplastic finite element method. In the approach, the temperatures of dies are considered to be constant. Two hot forging processes of large crank shafts ranging from 800 to 1000 kg are simulated using the simple approach.

• Electronics and Telecommunications Trends
• /
• v.20 no.4 s.94
• /
• pp.58-66
• /
• 2005

2004년, 개봉 39일만에 국내관객 1000만 명을 돌파하며 국내영화사상 신기록을 수립한 영화 ‘태극기 휘날리며’에선 사상 유례없는 10만여 명 이상의 피난 및 중공군 진격장면이 연출되었다. 그러나, 10만여 명이 나오는 장면을 찍기 위해 동원된 엑스트라는300여 명에 불과하다. 1982년작 영화 ‘간디’의 장례식에 동원된 30만 명의 엑스트라를 생각한다면 괄목할 발전이라 할 수 있다. 이와 같은 대규모 스펙터클 잠연이 영화에서 빈번히 활용될수록 첨단영상 장비에 대한 활용도는 제고될 것으로 예상된다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.150-151
• /
• 2002

In recent years, semi-metallic Bismuth (Bi) has attracted significant attention due to very large magnetoresistance (MR) at room temperature originating from long carrier mean free path l and small effective carrier mass m＊[1, 2]. In particular, the MR behavior and long carrier mean free path l in Bi thin films can be exploited for spintronic devices, e.g. magnetic field sensors and spin-valve transistors. In present work, we present the magnetotransport properties of the electroplated and sputtered Bi thin films in the temperature range 4-300 K. (omitted)