• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.791-796
• /
• 2020

Nuclear fusion seems to be a good choice of energy source in the future. Nickel is one of the crucial structural materials for fusion devices. In this work, the cross section data of ⁵⁸Ni(n,p)⁵⁸Co, ⁶⁰Ni(n,p)⁶⁰Co, ⁶¹Ni(n,p)⁶¹Co, ⁶²Ni(n,p)⁶²Co and ⁶⁴Ni(n,p)⁶⁴Co reactions were calculated using the nuclear codes ALICE/ASH, EMPIRE 3.2 and TALYS 1.8. In addition, the cross sections were calculated with the empirical formulas obtained in our previous paper at 14-15 MeV. The obtained results were compared with the measured values in the literature, and with the evaluated data files (JEFF-3.3, TENDL-2017, ENDF/B-VIII.0).

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3334-3341
• /
• 2023

We studied the irradiation effects of fast neutron generated by a 30 MeV cyclotron on the electrical and switching characteristics of NPT-IGBT devices. Fast neutron fluence ranges from 2.7 × 10⁹ to 1.82 × 10¹³ n/cm². Electrical characteristics of the IGBT device such as I-V, forward voltage drop and additionally switching characteristics of turn-on and -off were measured. As the neutron fluence increased, the device's threshold voltage decreased, the forward voltage drop increased significantly, and the turn-on and turn-off time became faster. In particular, the delay time of turn-on switching was improved by about 35% to a maximum of about 39.68 ns, and that of turn-off switching was also reduced by about 40%-84.89 ns, showing a faster switching.

• The Korean Journal of Physiology
• /
• v.23 no.2
• /
• pp.225-236
• /
• 1989

1) At the isolated perfused guinea-pig and rat heart heterometric autoregulation of the myocardium and myogenic autoregulation of the coronary vessels were induced by means of stepwise increases of perfusion pressure. 2) According to this loading test Frank-Starling function curves of the left ventricle and pressure-flow curves of the coronary vessels can be drawn. This graphic evaluation gives more information about the condition of the heart and the coronary vessels than simple evaluation under hemodynamic equilibrium. 3) There are significant differences in both curves between animal species and between different perfusate Mg concentration. 4) Myogenic autoregulation is not affected by the cyclooxygenase inhibitors indometacin and me- clofenamate. Thus it appears unlikely that prostanoides are involved in myogenic autoregulation. 5) Ca antagonists (Gallopamil, prenylamine) depress myogenic autoregulation dose-dependently. Enhanced myogenic autoregulation, induced by low extracellular magnesium, can be reduced effectively by Gallopamil. 6) Ginsenosides from Panax ginseng as well as the ginsenoside 'Rg' are effective inhibitors of myogenic autoregulation without major negative inotropic effects.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4231-4235
• /
• 2022

Considering the importance of deuterium in nuclear science including medical and industrial researches such as (BNCT) and nuclear reactors respectively, it is important to study various possible ways in addition to common methods for measuring its concentration. This study is an effort to measure deuterium concentration using PGNAA. The main idea is to calculate the area under 2.23 MeV gamma-rays photo peak resulting from neutron collision with Hydrogen atoms which are in mix with deuterium in samples. The study carried out by both simulation and experiment. Monte Carlo MCNPX2.6 code has been used for simulation and based on its acceptable results an experimental setup has been arranged. The coordination of results was in the range of R = 0.99 and R = 0.98 in simulation and experiment respectively. The accuracy of the study has been investigated by measuring the concentration of an unknown sample by both PGNAA and Fourier transform infrared spectroscopy (FT-IR) methods in which there were acceptable correlation between these two methods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.378-385
• /
• 2013

The aim of this study was to examine the effect of variety and growing conditions of wheat on broiler performance and nutrient digestibility. One hundred and sixty-four wheat samples, collected from a wide range of different sources, locations, varieties and years, were analyzed for a range of chemical and physical parameters. Chemical and physical parameters measured included specific weight, thousand grain weight (TG), in vitro viscosity, gross energy, N, NDF, starch, total and soluble non-starch polysaccharides (NSP), lysine, threonine, amylose, hardness, rate of starch digestion and protein profiles. Ninety-four of the wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolizm cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), live weight gain (LWG) and gain:feed were determined weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, DM retention, oil and NDF digestibility. At 28 d the birds were sacrificed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal DM, starch and protein digestibility. The wheat samples used in the study had wide-ranging chemical and physical parameters, leading to bird DMI, LWG, gain:feed, ME:GE, AME content and ileal starch and protein digestibility being significantly (p<0.05) affected by wheat sample. A high level of N fertilizer application to the English and NI wheat samples tended to benefit bird performance, with increases of up to 3.4, 7.2 and 3.8% in DMI, LWG and gain:feed, respectively. Fungicide application also appeared to have a positive effect on bird performance, with fungicide treated (+F) wheat increasing bird DMI, LWG and gain:feed by 6.6, 9.3 and 2.7%, over the non-fungicide treated (-F) wheats. An increase (p<0.1) of 9.3% in gain:feed was also observed at the low seed rate of 40 compared to 640 seeds/$m^2$. It was concluded that the type of wheat sample and environmental growing conditions significantly affects bird performance when fed wheat-based diets.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.432-438
• /
• 2018

The occurrence of saturation in the CR-39 detector reduces and limits its detection dynamic range; nevertheless, this range could be extended using spectroscopic techniques and by measuring the net bulk rate of the saturated CR-39 detector surface. CR-39 detectors were irradiated by 1.5 MeV high alpha-particle fluence varying from $0.06{\times}10^8$ to $7.36{\times}10^8\;alphas/cm^2$ from Am-241 source; thereafter, they were etched in a 6.25N NaOH solution at a temperature of $70^{\circ}C$ for different durations. Net bulk etch rate measurement of the 1.5 MeV alpha-irradiated CR-39 detector surface revealed that rate increases with increasing etching time and reaches its maximum value at the end of the alpha-particle range. It is also correlated with the alpha-particle fluence. The measurements of UV-Visible (UV-Vis) absorbance at 500 and 600 nm reveal that the absorbance is linearly correlated with the fluence of alpha particles at the etching times of 2 and 4 hour. For extended etching times of 6, 10, and 14.5 hour, the absorbance is saturated for fluence values of $4.05{\times}10^8$, $5.30{\times}10^8$, and $7.36{\times}10^8\;alphas/cm^2$. These new methods pave the way to extend the dynamic range of polymer-based solid state nuclear track detectors (SSNTDs) in measurement of high fluence of heavy ions as well as in radiation dosimetry.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• Journal of Food Hygiene and Safety
• /
• v.17 no.1
• /
• pp.8-14
• /
• 2002

Cotinine, one of nicotine metabolites, has been blown to reduce 4-(methylnitro samino)-1-(3-pyridyl)-1-butanone(NNK)- induced $O^{6}$MeG DNA adducts significantly in A/J mice when administered together with NNK. In order to examine the effects of phyto-extract mixture on the conversion of cotinine from nicotine, cellular and clinical experiments were carried out. When the phyto-extract mixture was added to culture media, human liver cells (FLCFR5) produced cotinine from nicotine 2~3 times compared to the control. The phyto-extract mixture which was microinjected into Xenopus oocyte along with nicotine showed the almost similar production of cotinine compared with the results of hepatic cell culture. In clinical test employing 17 to 20 healthy men, concentrations of urinary cotinine derived from smoking after taking photo-extract mixture increased up to 2 times compared to the control group. These results indicatethat the phyto-extract mixture can increase the metabolic efficiency of nicotine to cotinine, leading to the reduced formation of $O^{6}$MeG DNA adducts.

• Korean Journal of Poultry Science
• /
• v.32 no.1
• /
• pp.61-66
• /
• 2005

This experiment was conducted to compare the influences of dietary sea urchin shell powder (SUSP) supplemented to broiler diets on performance, mineral contents and blood cholesterol for 5 weeks. The experimental diets contained 21.5 and $19\%$ CP for the starting and finishing period, respectively The ME was 3,100 kcal/kg of feed in both starter and finisher diets. One hundred sixty chicks were assigned to 4 treatments with 4 replicates and fed one of 4 experimental diets containing different levels of SUSP: 1) Control (commercial feed) 2) T1 (commercial feed with $1\%$ SUSP) 3) T2(commercial feed with $3\%$ SUSP) 4) T3(commercial feed with $5\%$ SUSP). Body weight gain was higher in the T1 group when fed the starter diet (P<0.05), but was the lowest in T1 group for finishing period. Feed efficiency was not significantly different between the control and treatment groups (P>0.05). The total cholesterol of the control was higher than the treatment groups and the HDL-cholesterol were higher in T2 and T3. However, effects of diets containing graded levels of SUSP on LDL-cholesterol and triglyceride contents were not found (P>0.05). The SUSP diets were increased significantly the Fe, Zn and Ca contents of chicken meat, and tended to increase total mineral contents. In conclusion, dietary supplementation of SUSP to broiler diets could be applied to the enhancement of Ca, Fe and total mineral contents levels in chicken meat.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.69-74
• /
• 2010

Irradiation behavior of the reactor pressure vessel SA508 class 3 steel weld metals was examined by Charpy V Notch impact specimens. The specimens were exposed to a fluence of $2.8{\times}1019$ neutrons(n)/$cm^2$(E>1 MeV) at $288^{\circ}C$. The irradiation damage of weld metal was evaluated by comparison between unirradiated and irradiated specimens in terms of absorbed energy and lateral expansion. The specimens for neutron irradiation were welded by submerged arc welding process at a heat input of 3.2 kJ/mm which showed good toughness in terms of weld microstructure, absorbed energy and lateral expansion. The post-irradiation Charpy V notch 41J and 68J transition temperature elevation were $65^{\circ}C$ and $70^{\circ}C$, respectively. This elevation was accompanied by a 20% reduction in Charpy V notch upper shelf energy level. The lateral expansion at 0.9mm irradiated Charpy specimens showed temperature elevation of $65^{\circ}C$ and was greatly decreased due to radiation damage.