• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1689-1691
• /
• 2003

In this paper, we investigated the relationships between the position of bus electrode and discharge characteristics in ac PDP with VGA resolution. The double bus electrode lines at the edge of ITO electrode are placed in order to lower the firing voltage. As a result, static margin and dynamic margin for the PDP with double bus electrodes was about 10V lower than conventional type.

• 소성∙가공
• /
• 제24권1호
• /
• pp.5-12
• /
• 2015

In the current study, fundamental deep drawing characteristics of Ti-6Al-4V alloy sheets were investigated to establish the effect of processing conditions on large size square deep drawn cups. To accomplish this study, FE-simulations (Abaqus) were performed to determine optimum blank size, friction coefficient, the gap between punch and die, etc. The simulated processing parameters were verified experimentally. Based on the FE-simulation results, deep drawing was performed with various blank holding loads and sample sizes. In order to improve the formability of Ti-6Al-4V sheet, various lubricant methods were evaluated. Tensile tests and thickness measurements were conducted on the formed sheets. Processing parameters including blank holding force, lubricants, and optimum blank size, were selected to achieve improved drawing quality. With the optimum processing condition, a $200mm{\times}200mm$ cup was deep drawn successfully.

• 소성∙가공
• /
• 제33권2호
• /
• pp.112-117
• /
• 2024

In this study, the friction and wear characteristics of Inconel 600 in the superplastic forming process of Ti6Al4V were evaluated through pin-on-disc tests. To achieve an efficient and systematic experimental design, the Taguchi method was employed. The wear track of the Inconel 600 pin showed scratches in the sliding contact direction, confirming that the wear mechanism is abrasive wear. Through sensitivity analysis such as ANOVA and Main effects, it was confirmed that both normal force and sliding distance have a significant impact on the wear. Changes in sliding velocity and distance did not affect the friction coefficient, which remained relatively constant at approximately 0.380. The wear prediction model for Inconel 600 in the superplastic forming of Ti6Al4V was constructed, which can be utilized as a guideline for the prediction and management of tool wear.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1533-1535
• /
• 2000

The design and fabrication technologies of pulse power reversely switched-on dynistor have been developed 1200V/120kA pulse power reversely switched-on dynistor device have been designed by analytically and numerically using commercial modeling S/W The important characteristics of reversely switched-on dynistors are breakover voltage $V_{BO}$, commutative peak voltage before steady state $V_m$, on-state voltage in steady state $V_o$, turn-off time $t_q$, dV/dt capability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1568-1569
• /
• 2006

An electric probe is a conductor inserted into the plasma, by which plasma density and electron temperature can be deduced from the collected current (I) versus applied voltage (V) to the probe. In RF plasma the I-V characteristics of electric probe is distorted due to the RF fluctuation of plasma potential, so that it is hard to measure the real plasma parameters, especially the electron temperature. To eliminate the RF fluctuation, several compensation methods are developed such as RF compensation probe, peak-to-peak method, asymmetric double probe. By comparing proposed methods, a suitable method is to be introduced in determining electron temperatures in RF plasma.

• 천문학회보
• /
• 제37권2호
• /
• pp.237.2-237.2
• /
• 2012

We performed simultaneous observations of SiO v=1, 2, $^{29}SiO$ v=0, J=1-0 and $H_2O$ $6_{16}-5_{23}$ maser lines toward 132 AGB and 183 post-AGB stars in order to investigate how evolutionary characteristics from AGB to post-AGB stars appear in these two maser emissions. The observations were carried out from 2011 February to 2012 March using the Korean VLBI Network 21-m radio telescopes. We have detected SiO and/or $H_2O$ maser emission from 29 sources out of 183 post-AGB stars including 19 new detections. Of 132 AGB stars which are mainly selected based on the IRAS Point Source Catalog, we detected SiO and/or $H_2O$ maser emission from 38 stars including 18 newly detected sources. An evolutionary characteristic from AGB to post-AGB stars is discussed in IRAS two-color diagram. It is found that SiO v=2, J=1-0 maser emission without SiO v=1 maser detections was detected from 8 sources among 21 SiO detected post-AGB stars and the intensity of SiO v=2, J=1-0 maser tends to be much stronger than that of SiO v=1. We also found that for the post-AGB stars the maser detection rate of blue group sources (which have higher outflow velocities than red group) are higher than that of red group. Especially, only $H_2O$ maser emission was detected from 7 sources among 94 red group sources without SiO maser detections.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.300-301
• /
• 2007

In this study, it is investigated that sheet characteristics of high strength steel sheets and effect of springback. High strength steel sheets has got attention in automobile industry of high strength and high formability. Springback is a common phenomenon in sheet metal forming, caused by the elastic recovery of the internal stresses after removal of the tooling. However, the information in deformation behavior of high strength steel sheets, including bending and sheet characteristics and springback, is not enough until now. In this research, the V-bending experiment and analysis have been done to obtain the information of springback of high strength steel sheets. Tensile test for high strength steel sheets was done to got tensile properties of elastic modulus and flow stress of the material. It analyzed springback according to the sheet characteristics with using roll-forming model. FE-Simulation used DEFORM-$3D^{TM}$.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3704-3710
• /
• 2021

The characteristics of the external radiation on the surface of the casks for spent nuclear fuel (SNF) storage by dry method are investigated for the case when the spatial distribution of SNF in the basket changes due to the destruction of the fuel rod claddings. The surface areas are determined, where the changes in fluxes of neutrons, produced by ²⁴⁴Cm actinide, and γ-quanta, produced by long-lived isotopes, are maximum in the result of the decrease in the height of the SNF area. Concrete (VSC-24) and metal (SC-21) casks are considered as examples. The procedure of periodic measurement of the dose rate of neutrons or γ-quanta at the specified points of the cask surface is proposed for identifying the fuel rod cladding destruction. Under normal operation, the decrease in the dose rate produced by neutrons as the function of SNF storage duration is determined by the half-life of ²⁴⁴Cm, and for γ-quanta - by the half-lives of long-lived SNF isotopes. Consequently, a stepwise change in the dose rate of neutrons or γ-quanta, detected by the measurements, as compared to the previous one, would indicate the destruction of the fuel rod claddings.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.259-264
• /
• 2000

The functions of the plug valve are the control of flow rate as well closing and opening pipe lines. Analyses on the flow characteristics in plug valve port are required to improve the performance and safety at severe operating conditions such as high-pressure and high-temperature. In this study, numerical analyses are carried out with varying the opening rate (fraction of the full open to close) of the valve and the shapes of valve Uk: straight, convex, concave and mixed shapes. The parameters influencing the flow characteristics in the valve are the discharge coefficient( $C_v$) and the resistance coefficient( K). Therefore, the distributions of static pressure, velocity vector and stream lines are investigated, and $C_v$ and K are calculated in each opening rate and shape. In case of full open, the static pressure passed through the valve port has almost been recovered. However, in case of other opening rates, the pressure does not permanently regained due to pressure drop leading to loss. This phenomenon in each shape of the valve shows the different behaviors. Calculation results show that the mixed shape has the best flow attribute.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.252-256
• /
• 2002

We studied YBCO films for current limiting of the resistive type which utilizes a transition from superconducting to normal state caused by exceeding critical current. The films were deposited on sapphire substrates and covered by gold top layer. The current limiting element consists of 2 mm wide YBCO stripes connected in series. A serious problem in using YBCO films for current limiting is inhomogeneities caused by imperfect manufacturing. Therefore simultaneous quench is a difficult problem when elements for current limiting are connected in series. So some researchers have recently proposed using magnetic field and heating for simultaneous quench. We have measured extended exec trim field-current density(E-J) characteristics for current limiting elements of YBCO films in applied magnetic field of 0 - 130 mT. And we have investigated quench characteristics in current limiting elements and between elements of YBCO films in applied magnetic field. The result of the experiments show that the presence of applied magnetic fields induces uniform quench distribution fur the stripes in element at $50V_{rms}$, otherwise non-uniform quenches were observed. And simultaneous quenches between elements were investigated at $150V_{rms}$. We suggest that suppressing the critical current by increased fields due to fault current effectively forced the stripes of higher $J_{c}$(0) to quench, resulting in equalizing quench times.s.s.s.