• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.310-313
• /
• 2000

In this study, the Au/Ni and Au/Ni/Si/Ni layers prepared by electron beam evaporation were used to form ohmic contacts on p-type GaN. Before rapid thermal annealing, the current-voltage(I-V) characteristic of Au/Ni and Au/Ni/Si/Ni contact on p-type GaN film shows non-ohmic behavior. A Specific contact resistance as 3.4$\times$10$^{-4}$ Ω-$\textrm{cm}^2$ was obtained after 45$0^{\circ}C$-RTA. The Schottky barrier height reduction may be attributed to the presence of Ga-Ni and Ga-Au compounds, such as Ga$_4$Ni$_3$, Ga$_4$Ni$_3$, and GaAu$_2$ at the metal - semiconductor interface. The mixing behaviors of both Ni and Au have been studied by using X-ray photoelectron spectroscopy. In addition, X-ray diffraction measurements indicate that the Ni$_3$N, NiGa$_4$, Ni$_2$Si, and Ni$_3$Si$_2$ Compounds were formed at the metal-semiconductor interface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.125-130
• /
• 2001

Experimental and analytical researches have been conducted on the twin-fluid atomizers for better droplet breakup during the past decades. But, the studies on the disintegration mechanism still present a great challenge to understand the drop behavior and breakup structure. In an effort to describe the aerodynamic behavior of the sprays issuing from the internal mixing counter-swirling nozzle, the spatial distribution of axial (U) radial (V) and tangential (W) components of droplet velocities are investigated across the radial distance at several axial locations of Z=30, 50, 80, 120 and 170mm, respectively. Experiments were conducted for the liquid flow rates which was kept constant at 7.95 g/s and the air injection pressures were varied from 20 kPa to 140 kPa. Counter-swirling internal mixing nozzles manufactured at angles of $15^{\circ},\;30^{\circ},\;45^{\circ}$ and $60^{\circ}$ the central axis with axi-symmetric tangential-drilled holes was considered. The distributions of velocities and turbulence intensities are comparatively analyzed. PDPA is installed to specify spray flows, which have been conducted along the axial downstream distance from the nozzle exit. Ten thousand of sampling data was collected at each point with time limits of 30 second. 3-D automatic traversing system is used to control the exact measurement. It is observed that the sprays with all swirl angle have the maximum SMD for on air injection pressure of 20 kPa and 140 kPa with centerline, respectively. The nozzle with swirl angle of $60^{\circ}$ has vest performance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권10호
• /
• pp.1425-1434
• /
• 2008

The study was conducted to evaluate and compare the effects of feed additives on ruminal fermentation, nutrient digestibility and performance of lambs fed diets containing 60% wet brewers grains (WBG). In Experiment 1, two simultaneous trials were conducted. Fifty intact ($20.2{\pm}0.8kg\;BW$) lambs were used in a feedlot trial and 10 (rumen cannulated; $32{\pm}1kg\;BW$) in a digestion trial. The pH, volatile fatty acids (VFA) and ammonia-N in lambs were also estimated. Lambs were randomly assigned to one of five diets: i) without additives (Con), ii) with 1% bicarbonate (Bic), iii) with 1% bentonite (Ben), iv) with 33 mg/kg monensin (Mon) and v) with 200 mg/kg fibrolityc enzymes (Enz). In Experiment 2, 120 RambouilletPelibuey intact male lambs ($19.5{\pm}1.5kg\;BW$) were used in a feedlot trial and randomly assigned to four diets: i) without additives (control), ii) with 1% Bic, iii) with 33 mg/kg Mon and iv) with 1% Bic and 33 mg/kg Mon. In Experiment 1, lambs fed diets containing Bic or Mon had significantly higher final weight, DMI, ADG than other lambs. However, apparent DM, OM, CP, NDF and ADF digestibilities and ruminal individual VFA content were similar (p>0.05) among treatments. Conversely, treatmentcollection period interaction was significant for ruminal pH and NH3. In Experiment 2, lambs fed diets containing a Bic and Mon combination had significantly higher final weight, DMI and ADG. It is concluded lambs fed Bic or Mon or Bic and Mon combination had better performance characteristics than lambs on Ben or Enz.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권1호
• /
• pp.86-91
• /
• 2012

An in vitro rumen batch culture study was completed to compare effects of common grasses, leguminous shrubs and non-leguminous shrubs used for livestock grazing in Australia and Ghana on $CH_4$ production and fermentation characteristics. Grass species included Andropodon gayanus, Brachiaria ruziziensis and Pennisetum purpureum. Leguminous shrub species included Cajanus cajan, Cratylia argentea, Gliricidia sepium, Leucaena leucocephala and Stylosanthes guianensis and non-leguminous shrub species included Annona senegalensis, Moringa oleifera, Securinega virosa and Vitellaria paradoxa. Leaves were harvested, dried at $55^{\circ}C$ and ground through a 1 mm screen. Serum bottles containing 500 mg of forage, modified McDougall's buffer and rumen fluid were incubated under anaerobic conditions at $39^{\circ}C$ for 24 h. Samples of each forage type were removed after 0, 2, 6, 12 and 24 h of incubation for determination of cumulative gas production. Methane production, ammonia concentration and proportions of VFA were measured at 24 h. Concentration of aNDF (g/kg DM) ranged from 671 to 713 (grasses), 377 to 590 (leguminous shrubs) and 288 to 517 (non-leguminous shrubs). After 24 h of in vitro incubation, cumulative gas, $CH_4$ production, ammonia concentration, proportion of propionate in VFA and IVDMD differed (p<0.05) within each forage type. B. ruziziensis and G. sepium produced the highest cumulative gas, IVDMD, total VFA, proportion of propionate in VFA and the lowest A:P ratios within their forage types. Consequently, these two species produced moderate $CH_4$ emissions without compromising digestion. Grazing of these two species may be a strategy to reduce $CH_4$ emissions however further assessment in in vivo trials and at different stages of maturity is recommended.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.333-337
• /
• 2003

We report a new fabrication process for carbon nanotube field emitters with high performance. The key of the fabrication process is trim-and-leveling the carbon nanotubes grown in trench structures by employing a planarization process, which leads to a uniform distance from the carbon nanotube tip to the electrode. In order to enable this processing, spin-on-glass liquid is applied over the CNTs grown in trench to have them stubborn adhesion among themselves as well as to the substrate. Thus fabricated emitters reveal an extremely stable emission and aging characteristics with a large current density of 40 ㎃/$\textrm{cm}^2$ at 4.5 V/$\mu\textrm{m}$. The field enhancement factor calculated from the F-N plot is $1.83${\times}$10^{5}$ $cm^{－1}$ , which is a very high value and indicates a superior quality of the emitter originating from the nature of open-tip and high stability of the carbon nanotubes obtained new process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.643-648
• /
• 2005

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid, accurate method of evaluating some chemical constituents in cereal grains and forages. If samples could be analyzed without drying and grinding, then sample preparation time and costs may be reduced. This study was conducted to develop robust NIRS equations to predict fermentation quality of corn (Zea mays) silage and to select acceptable sample preparation methods for prediction of fermentation products in corn silage by NIRS. Prior to analysis, samples (n = 112) were either oven-dried and ground (OD), frozen in liquid nitrogen and ground (LN) and intact fresh (IF). Samples were scanned from 400 to 2,500 nm with an NIRS 6,500 monochromator. The samples were divided into calibration and validation sets. The spectral data were regressed on a range of dry matter (DM), pH and short chain organic acids using modified multivariate partial least squares (MPLS) analysis that used first and second order derivatives. All chemical analyses were conducted with fresh samples. From these treatments, calibration equations were developed successfully for concentrations of all constituents except butyric acid. Prediction accuracy, represented by standard error of prediction (SEP) and $R^2_{v}$ (variance accounted for in validation set), was slightly better with the LN treatment ($R^2$ 0.75-0.90) than for OD ($R^2$ 0.43-0.81) or IF ($R^2$ 0.62-0.79) treatments. Fermentation characteristics could be successfully predicted by NIRS analysis either with dry or fresh silage. Although statistical results for the OD and IF treatments were the lower than those of LN treatment, intact fresh (IF) treatment may be acceptable when processing is costly or when possible component alterations are expected.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권12호
• /
• pp.1790-1797
• /
• 2002

Lactic acid bacteria were isolated from piglets and chicken and characterized. Lactic acid bacteria showing resistance to low pH and bile, adhesion to intestinal epithelium cells, and the inhibition of Escherichia coli and Salmonella spp. were identified as Lactobacillus acidophilus. L. acidophilus PF01 survived for 2 h in MRS broth adjusted to pH 2. L. acidophilus CF07 was less resistant than L. acidophilus PF01 to pH 2, but survived at pH 2.5 for 2 h. Both of isolates were able to grow in MRS broth containing 0.3% (w/v) bile, with L. acidophilus CF07 being more tolerant to bile than L. acidophilus PF01. L. acidophilus PF01 and CF07 adhered specifically to the duodenal and jejunal epithelium cells of piglet, and the cecal and duodenal epithelium cells of chicken, respectively. Both of isolates did not adhere to the epithelium cells of the various animal intestines from which they were isolated. When L. acidophilus was cultured with E. coli and Salmonella spp. in MRS broth, MRS broth containing 2% skim milk powder or modified tryptic soy broth at $37^{\circ}C$, L. acidophilus PF01 and CF07 inhibited the growths of E. coli K88 and K99, and S. enteritidis and S. typhimurium, respectively. Both of isolates were found to possess the essential characteristics of probiotic lactic acid bacteria for piglet and chicken.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권6호
• /
• pp.757-761
• /
• 2010

This study was conducted to assess the effects of organic and inorganic copper on performance in growing pigs. A total of 100 pigs, average age 63 d and initial body weight 21.46${\pm}$1.13 kg, were assigned to five treatment groups. Dietary treatments included i) CON (basal diet, 0 ppm Cu), ii) T1 (basal diet with 67 ppm Cu as cupric sulfate, $CuSO_4$), iii) T2 (basal diet with 134 ppm Cu as $CuSO_4$), iv) T3 (basal diet with 67 ppm Cu as cupric methionate, CuMet) and v) T4 (basal diet with 134 ppm Cu as CuMet). Throughout the entire experimental period, ADG (average daily gain), ADFI (average daily feed intake) and G/F (gain: feed) ratios showed no significant differences. The dry matter digestibility was improved in the T1, T2, T3, and T4 treatments (p<0.05), as compared with CON. Nitrogen digestibility was improved in the T3 treatment group as compared with CON (p<0.05). As compared with the T1 treatment group, fecal pH values were improved in the CON, T3, and T4 treatment groups (p<0.05). Fecal Cu concentrations were significantly lower in the CON, T3, and T4 treatment groups than in T1 and T2 (p<0.05). The incidence of diarrhea was reduced when the pigs were fed on the T2, T3, and T4 diets as compared with CON. In conclusion, diets supplemented with 67 or 134 ppm Cu as CuMet may prove effective in improving nutrient digestibility and fecal pH value in growing pigs, and fecal Cu concentrations may be reduced by CuMet supplementation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.124-124
• /
• 2011

This study investigated the interaction of varied plasma power with ultralow-k toluene-tetraethoxysilane (TEOS) hybrid plasma polymer thin films, as well as changing electrical and mechanical properties. The hybrid thin films were deposited on silicon(100) substrates by plasma enhanced chemical vapor deposition (PECVD) system. Toluene and tetraethoxysilane were utilized as organic and inorganic precursors. In order to compare the electrical and the mechanical properties, we grew the hybrid thin films under various conditions such as rf power of plasma, bubbling ratio of TEOS to toluene, and post annealing temperature. The hybrid plasma polymer thin films were characterized by Fourier transform infrared (FT-IR) spectroscopy, atomic force microscopy (AFM), nanoindenter, I-V curves, and capacitance. Also, the hybrid thin films were analyzed by using ellipsometry. The refractive indices varied with the RF power, the bubbling ratio of TEOS to toluene, and the annealing temperature. To analyze their trends of electrical and mechanical properties, the thin films were grown under conditions of various rf powers. The IR spectra showed them to have completely different chemical functionalities from the liquid toluene and TEOS precursors. Also, The SiO peak intensity increased with increasing TEOS bubbling ratio, and the -OH and the CO peak intensities decreased with increasing annealing temperature. The AFM images showed changing of surface roughness that depended on different deposition rf powers. An nanoindenter was used to measure the hardness and Young' modulus and showed that both these values increased as the deposition RF power increased; these values also changed with the bubbling ratio of TEOS to toluene and with the annealing temperature. From the field emission scanning electron microscopy (FE-SEM) results, the thickness of the thin films was determined before and after the annealing, with the thickness shrinkage (%) being measured by using SEM cross-sectional images.