• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2277-2279
• /
• 1999

We have investigated the characteristic analysis of ultrasonic in case of occurring partial discharge in experimental steel chamber. This study presents the discriminative method of partial discharge by optimum threshold value. We have carried out the experiments of measuring partial discharge numbers between ultrasonic sensor and transducer with changing distance and barrier inside steel chamber. After the measured data were trasformed A/D conversion by GPIB, we used the optimum method of threshold value for counting numbers of partial discharge.

• Applied Biological Chemistry
• /
• 제20권1호
• /
• pp.101-104
• /
• 1977

Geotrichum candidum이 분비한 lipase를 인산완충용액 중에서 열처리하여 열불활성 곡선을 얻었다. $50^{\circ}C$에서 lipase의 열 불활성 곡선은 고온의 경우와는 달리 일차 반응 속도법칙을 따르지 않았고 고온의 경우에는 일차 반응을 따랐다. $60^{\circ}C$에서의 엔탈피, 엔트로피 및 깁스 자유 에너지의 변화는 각각 120.4 kJ/mol, 73.0 J/mol.K 및 96.9 kJ/mol이었다. 열 불활성 곡선에서 얻은 Geotric hum candidum lipase의 z-value는 $19^{\circ}C$로 pancreas나 우유 중에 존재하는 lipase의 z-value보다 훨씬 큰 값을 나타낸다. 환경인자의 영향으로는 lecithin과 linoleic ac를 첨가하여 열처리 하였는데 실험에 사용한 계면활성제의 농도에서는 별다른 큰 영향을 미치지 않았다.

• Coupled systems mechanics
• /
• 제6권1호
• /
• pp.97-111
• /
• 2017

The present paper reports an analytical study of delamination fracture in the Mixed Mode Flexure (MMF) functionally graded beam with considering the material non-linearity. The mechanical behavior of MMF beam is modeled by using a non-linear stress-strain relation. It is assumed that the material is functionally graded along the beam height. Fracture behavior is analyzed by the J-integral approach. Non-linear analytical solution is derived of the J-integral for a delamination located arbitrary along the beam height. The J-integral solution derived is verified by analyzing the strain energy release rate with considering the non-linear material behavior. The effects of material gradient, crack location along the beam height and material non-linearity on the fracture are evaluated. It is found that the J-integral value decreases with increasing the upper crack arm thickness. Concerning the influence of material gradient on the non-linear fracture, the analysis reveals that the J-integral value decreases with increasing the ratio of modulus of elasticity in the lower and upper edge of the beam. It is found also that non-linear material behavior leads to increase of the J-integral value. The present study contributes for the understanding of fracture in functionally graded beams that exhibit material non-linearity.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.34-44
• /
• 1996

In order to examine the accuracy of the intensity method, the fiber orientation-angle distribution of fiber-reinforced polymeric composites is measured using image processing. The fiber orientation function is calculated from the fiber orientation measured by the soft X-ray photograph. Theoretical and experimental results of fiber orientation function are compared for the composites with different fiber contents and fiber orientations. The intensity method is used for the experimental investigation and the measured fiber orientation function is compared to the calculated one. The relations between the measured and the simulated fiber orientation functions $J{\small{M}}$ and $J{\small{S}}$ respectively are identified. For the fiber length of 1.000mm and 2.000mm, it shows that $J{\small{M}}=0.83J{\small{M}}$. However. in general. the value of $J{\small{M}}$ decreases as the fiber length increases. For GFRP composites the relations between $J{\small{M}}$ and theoretical value J show that $J{\small{M}}$=0.73J for short fiber and $J{\small{M}}$=0.81J for long fiber.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.70-77
• /
• 1996

Fatigue tests were carried out at high temperature on a Cr-Mo-V steel in order to assess the fatigue life of components used in power plants. The characteristics of high temperature fatigue were divided in terms of cycle-dependent fatigue and time-dependent fatigue, each crack propagation rate was examined with respect to fatigue J-integral range, .DELTA. J$_{f}$and creep J-integral range, .DELTA. J$_{c}$. The fatigue life was evaluated by analysis of J-integral value at the crack tip with a dimensional finite element method. The results obtained from the present study are summarized as follows : The propagation characteristics of high temperature fatigue cracks are determined by .DELTA. J$_{f}$for the PP(tensile plasticity-compressive plasticity deformation) and PC(tensile plasticity - compressive creep deformation) stress waveform types, and by .DELTA. J$_{c}$for the CP(tensile creep- compressive plasticity deformation) stress waveform type. The crack propagation law of high temperature fatigue is obtained by analysis of J-integral value at the crack tip using the finite element method and applied to examine crack propagation behavior. The fatigue life is evaluated using the results of analysis by the finite element method. The predicted life and the actual life are close, within a factor of 2.f 2.f 2.

• 대한물리치료과학회지
• /
• 제6권3호
• /
• pp.63-82
• /
• 1999

Recent studies have revealed that Nitric oxide(NO) was one of the demonstration for the physiological regulator, endothelial derived relaxing factor(EDRF) and that NO was produced by ultraviolet irradiation in human. Thus, the present author have carried out a experimental study on the change of hematological, histological value of ultraviolet irradiation in sprague-dawley rats. The subjects were divided into four groups of ten rats each selected at random. There were 4 groups: 1. no irradiation control; 2. ultraviolet $75mJ/cm^2$ irradiation group; 3. ultraviolet $150mJ/cm^2$ irradiation group; 4. ultraviolet $225mJ/cm^2$ group. After a irradiation, hematological and histological tests were performed to observe erythrocyte, hemoglobin, hematocrit, MCH, MCHC, MCV, $O_2$ saturation, pH, $PO_2,\;PCO_2$ value and to observe histological changes. In hematological tests, erythrocyte, hemoglobin, hematocrit significantly increased in $75mJ/cm^2$ than control group and more $150mJ/cm^2$ ultraviolet irradiation group respectively. Also In blood gas tests, $PO_2$ significantly increased in $75mJ/cm^2$ and more $150mJ/cm^2$ group than control group. Whereas $PCO_2$ significantly decreased in $75mJ/cm^2$ and more $150mJ/cm^2$ group than control group (Duncan-Tukey test, P<0.05). In histological tests, control and $75mJ/cm^2$ group unchanged, but more $150mJ/cm^2$ group changed that it was cytolysis, cytotoxic effect, acanthosis, proliferation of keratinocyte, appearance of amorphous cell and pyknotic nucleus, production of sunburn cell. In conclusion, the present author results support the importance of the relation between NO effect and hematological, histological value by ultraviolet B irradiation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.291-292
• /
• 2010

• 대한수학회논문집
• /
• 제16권2호
• /
• pp.287-290
• /
• 2001

Let X$_1$, X$_2$, … be a sequence of independent and identically distributed random variables with continuous cumulative distribution function F(x). X(sub)j is an upper record value of this sequence if X(sub)j > max {X$_1$, X$_2$, …, X(sub)j-1}. We define u(n) = min {j│j > u(n-1), X(sub)j > X(sub)u(n-1), n $\geq$ 2} with u(1) = 1. Then F(x) = 1 - e(sup)-x/c, x > 0 if and only if E[X(sub)n(n+1) - X(sub)u(n)│X(sub)u(m) = y] = c or E[X(sub)u(n+2) - X(sub)u(n)│X(sub)u(m) = y] = 2c, n $\geq$ m+1.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.12-17
• /
• 2007

We performed periodic water-back-flushing using permeate water to minimize membrane fouling to enhance permeate flux in tubular ceramic microfiltration system for water treatment of high turbid source. The filtration time (FT) = 2 min with periodic 6 sec water-back-flushing showed the highest value of dimensionless permeate flux ($J/J_o$), and the lowest value of resistance of membrane fouling ($R_f$), and we acquired the highest total permeate volume $(V_T)\;=\;6.805L$. Also in the result of BT effect at fixed FT = 10 min and BT (back-flushing time) = 20 sec showed the lowest value of $R_f$ and the highest value of $J/J_o$, and we could obtain the highest $V_T\;=\;6.660\;L$. Consequently, FT = 2 min and BT = 6 sec could be the optimal condition in water treatment of high turbid source above 10 NTU. However, FT = 10 min and BT = 20 sec was superior to reduce operating costs because of lower back-flushing frequency. Then the average quality of water treated by our tubular ceramic MF system was turbidity of 0.07 NTU, $COD_{Mn}$ of 1.86 mg/L and $NH_3-N$ of 0.007 mg/L.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.111-121
• /
• 1992

For the purpose of investigating the effect of austenitizing temperatures on the mechanical properties of 0.23% C-13.6%Cr martensitic stainless steel, tensile properties, hardness, impact value and carbide extraction were examined after changing the austenitizing temperatures and tempering temperatures. The results obtained are summerized as follows. The carbide laminations formed from hot rolling before austenitization could not be eliminated after austenitizing at $950^{\circ}C$. With increasing austenitizing temperature, hardness increased and showed maximum value at $1050^{\circ}C$ and then slightly decreased. With increasing tempering temperature up to $500^{\circ}C$, impact value and elongation appeard to be decreased but hardness showed nearly unchanged at austenitizing temperature of $1150^{\circ}C$ due to the fine $M_7C_3$ carbides precipitation. The abrupt increase in impact value, hardness and elongation above the tempering temperature of $500^{\circ}C$ appeared to change in carbide structure from fine $M_7C_3$ to coarse $M_{23}C_6$.