• 한국해양공학회지
• /
• 제6권1호
• /
• pp.122-130
• /
• 1992

The effect of loading waveform on elevated temperature low-cycle fatigue crack growth behavior in a SUS 304 stainless steel have been investigated under symmetrical trangular (fast-fast), trapezoidal and asymmetrical(fast-slow, slow-fast) waveforms at 650.deg. C. It was found that the crack growth rate in fast-slow loading waveform appeared to be higher a little and the crack growth rate in slow-fast loading waveform much higer than that in fast-fast loading waveform, and difference in crack growth rate between fast-show and slow-fast waveforms nearly didn't appear in the region of da/dN>10/sup -2/ The crack growth rate in the trapezoidal loading waveform with t/sub h/=500sec appeared to be faster than that in slow(500sec)-fast(1sec). In addition, parameter modified J-integral could be considered as useful parameter for fatigue crack growth rate in all waveforms. The result obtained are as follow. da/dN=4.91*10/sup -3/ (.DELTA. J/sub c/)/sup 0.565/.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2796-2803
• /
• 2000

For traditional Leak-Before-Break(LBB) analyses, symmetric conditions were assumed for a pipe-nozzle interface to simplify the analysis in calculating J-integral. However. this assumption could result in an overly conservative design criteria for a pipe-nozzle interface, Since the pipe-nozzle interface is asymmetric due to the difference of stiffness between pipe and nozzle, it is required to develop a new methodology considering the nozzle effect. The objective of this paper is to evaluate the effect of nozzle no the development of LBB design criteria for nuclear pipings. For this purpose, extensive finite element analysis were performed to evaluate the effect of nozzle on Crack Opening Area(COA), Detectable Leakage Crack(DLC) length and J-integral values. In conclusion, it was proven that the application of LBB concept could be extended for more nuclear piping system by considering the nozzle.

• 한국항공우주학회지
• /
• 제39권11호
• /
• pp.1005-1012
• /
• 2011

본 연구에서는 기하학적 비선형 후좌굴해석 및 전역-국지해석을 통하여 얇은 막재에서 주름이 파괴거동에 미치는 영향을 연구하였다. 해석에서 양단노치 및 일단노치를 가지는 사각형 인장시험 시편형상을 고려하였으며 주름이 발생한 경우와 억제된 경우에 대해 각각 해석을 수행하여 그 결과를 비교하였다. 해석결과의 분석을 통하여 주름의 발달에 따라 J-적분값의 변화에 미치는 영향을 조사하였고, 컷 길이에 따른 영향 및 시편형상의 길이 효과에 대해 체계적으로 연구하였다.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.423-430
• /
• 2012

본 논문에서는 기하학적 비선형 후좌굴 유한요소 해석을 통하여 얇은 멤브레인에서 주름 발생이 컷의 진전방향에 미치는 영향을 연구하였다. 해석에는 양단에 인장을 받고 있고 중앙에 기울어진 컷을 가진 직사각형 멤브레인을 고려하였다. 주름이 발생한 경우와 주름이 발생하지 않은 경우에 대해 각각 해석을 수행하여 컷의 진전각도 및 $J$-적분값을 비교하였다. 컷의 진전각도는 에너지 방출률이 최대인 방향, $K_{II}$의 값이 0이 되는 방향을 구하는 방법 및 접선응력이 최대인 방향을 구하는 방법을 사용하여 계산하였다. 또한 다양한 컷의 초기방향각을 고려하여 각도에 따른 주름의 영향을 조사하였으며 가상의 미소크기의 컷을 반복적으로 진전시켜 컷이 전파되는 경향도 알아보았다.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.433-440
• /
• 2002

본 연구에서는 균일한 인장과 굽힘을 받는 반무한 평판내의 분기균열에 대하여 해석하였다. 중첩의 원리를 이용하여 인장과 굽힘을 받는 분기균열에 대하여 응력 및 모멘트 확대계수를 해석하였다. 응력확대계수는 유한요소법과 J 기저 상호매개적분을 이용하여 해석하였고, 모멘트확대계수는 균열선단의 모멘트로부터 모멘트외삽을 이용하여 계산하였다 무차원화된 응력확대계수와 모멘트확대계수에 대한 수치해석 결과는 분기균열 길이와 주균열의 비, 그리고 분기균열각의 함수로 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1262-1264
• /
• 2003

The author Present a modified multiloop algorithm including feedforward for controlling a 45kW step down chopper in the power supply of Maglev. The control law for the duty cycle consists of three terms. The first is the feedforward term which compensates for variations in the input voltage. The second term consists of the difference between the slowly moving inductor current and output current. The third term consists of proportional and integral terms involving the perturbation in the output voltage. This perturvation is derived by subtracting the desired output voltage from the actual output voltage. The proportional and integral action stabilizes the system and minimizes output voltage error. To verify the validity of the proposed multiloop controller, simulation study was tried using Matlab/sirnulink.

• Smart Structures and Systems
• /
• 제17권5호
• /
• pp.753-771
• /
• 2016

This paper addresses the free and transient responses of a SDOF linear complex stiffness system by making use of the Hilbert transform and the convolution integral. Because the second-order differential equation of motion having the complex stiffness give rise to the conjugate complex eigen values, its time-domain analysis using the standard time integration scheme suffers from the numerical instability and divergence. In order to overcome this problem, the transient response of the linear complex stiffness system is obtained by the convolution integral of a green function which corresponds to the unit-impulse free vibration response of the complex system. The damped free vibration of the complex system is theoretically derived by making use of the state-space formulation and the Hilbert transform. The convolution integral is implemented by piecewise-linearly interpolating the external force and by superimposing the transient responses of discretized piecewise impulse forces. The numerical experiments are carried out to verify the proposed time-domain analysis method, and the correlation between the real and imaginary parts in the free and transient responses is also investigated.

• 대한수학회보
• /
• 제42권3호
• /
• pp.591-608
• /
• 2005

Some new reverses of Bessel's inequality for orthonormal families in real or complex 2-inner product spaces are pointed out. Applications for some Gruss type inequalities and for determinantal integral inequalities are given as well.

• 대한수학회보
• /
• 제42권4호
• /
• pp.725-738
• /
• 2005

A reverse of the Cauchy-Bunyakovsky-Schwarz integral inequality for complex-valued functions and applications for the finite Fourier transform are given.

• 대한수학회보
• /
• 제33권2호
• /
• pp.277-287
• /
• 1996

The theory of integration of functions with values in a Banach space has long been a fruitful area of study. In the eight years from 1933 to 1940, seminal papers in this area were written by Bochner, Gelfand, Pettis, Birhoff and Phillips. Out of this flourish of activity, two integrals have proved to be of lasting: the Bochner integral of strongly measurable function. Through the forty years since 1940, the Bochner integral has a thriving prosperous history. But unfortunately nearly forty years had passed until 1976 without a significant improvement after B. J. Pettis's original paper in 1938 [cf. 11].