• Title/Summary/Keyword: J$_{}$ c/

Search Result 18,760, Processing Time 0.056 seconds

平面應力 破壞靭性値 擧動에 관한 硏究

  • 송삼홍;고성위;정규동
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.11 no.3
    • /
    • pp.376-385
    • /
    • 1987

  • In this study, the plane stress fracture toughness and Tearing modulus are investigated for various crack ratios using the J integral. To evaluate the J integral and Tearing modulus, both experiments and estimation are used. The thickness of the low carbon steel specimens that is used in the experiments is 3mm. The type of specimen that is considered in the study is center-cracked-tension one. The measurements of crack length are performed by unloading compliance method. In the estimation of crack parameters such as the J integral and load line displacement, the Ramberg and Osgood stress strain law is assumed. Then simple formulas are given for estimating the crack parameters from contained yielding to fully plastic solutions. Obtained results are as follows; (1) When the crack ratio is in the range of 0.500 - 0.701, the plane stress fracture toughness is almost constant regardless of crack ratios. (2) The fracture toughness (J$\_$c/) and Tearing modulus (T) obtained are J$\_$c/=28.51kgf/mm, T=677.7 for base metal, J$\_$c/=31.85kgf/mm, T=742.0 for annealed metal. (3) Simpson's and McCabe's formulas which consider crack growth in estimating J integral are shown more conservative J and lower T than Rice's and Sumpter's. (4) Comparison of the prediction with the actual experimental measurements by Simpson's formula shows good agreement.

  • https://doi.org/10.22634/KSME.1987.11.3.376 인용 PDF

Intrinsic Reactivity of NO and $N_2$O gas with Korean Anthracites (국내산 무연탄과 NO, $N_2$O 기체의 고유반응 특성)

  • 박영철
    • Journal of Energy Engineering
    • /
    • v.8 no.2
    • /
    • pp.279-284
    • /
    • 1999

  • Thermal analyses were conducted in a thermogravimetric analyzer by isothermal technique in order to characterize the Korean anthracites-nitrogen oxides reaction. The tested coal sample was Dogae anthracites and compared with SP-1 graphite. Carbon-NO and carbon-N$_2$O reactions were carried out with respect to isothermal reaction temperatures (550$^{\circ}C$-900$^{\circ}C$) and reactant gas partial pressures (5 kPa∼20 kPa). In NO reaction, measured reaction orders of NO concentration and activation energy were 0.45∼0.96 and 39∼l12 kJ/mol, respectively. In N$_2$O reaction, measured reaction orders of N$_2$O concentration and activation energy were 0.62∼0.87 and 190∼215.3 kJ/mol, respectively. Compared the Korean anthracites-nitrogen oxides reaction with the combustion reaction, the reaction rate in the oxidation below 700$^{\circ}C$ decreases in the order O$_2$>NO>N$_2$O. But above 700$^{\circ}C$, the reaction rate of N$_2$O is faster than that of NO.

  • PDF

Cryogenic milling for the fabrication of high Jc MgB2 bulk superconductors

  • Kim, D.N.;Kang, M.O.;Jun, B.H.;Kim, C.J.;Park, H.W.
    • Progress in Superconductivity and Cryogenics
    • /
    • v.19 no.2
    • /
    • pp.19-24
    • /
    • 2017

  • Cryogenic milling which is a combined process of low-temperature treatment and mechanical milling was applied to fabricate high critical current density $(J_c)MgB_2$ bulk superconductors. Liquid nitrogen was used as a coolant, and no solvent or lubricant was used. Spherical Mg ($6-12{\mu}m$, 99.9 % purity) and plate-like B powder (${\sim}1{\mu}m$, 97 % purity) were milled simultaneously for various time periods (0, 2, 4, 6 h) at a rotating speed of 500 rpm using $ZrO_2$ balls. The (Mg+2B) powders milled were pressed into pellets and heat-treated at $700^{\circ}C$ for 1 h in flowing argon. The use of cryomilled powders as raw materials promoted the formation reaction of superconducting $MgB_2$, reduced the grain size of $MgB_2$, and suppressed the formation of impurity MgO. The superconducting critical temperature ($T_c$) of $MgB_2$ was not influenced as the milling time (t) increased up to 6 h. Meanwhile, the critical current density ($J_c$) of $MgB_2$ increased significantly when t increased to 4 h. When t increased further to 6 h, however, $J_c$ decreased. The $J_c$ enhancement of $MgB_2$ by cryogenic milling is attributed to the formation of the fine grain $MgB_2$ and a suppression of the MgO formation.

  • https://doi.org/10.9714/psac.2017.19.2.019 인용 PDF KSCI

Effect of Water Potential on Mycelial Growth and Production of Sclerotia of Sclerotium cepivorum (Sclerotium cepivorum의 균사생장 및 균핵 생성에 대한 수분압의 영향)

  • Lee, Yong-Hoon;Lee, Du-Ku;Lee, Wang-Hyu
    • Korean Journal Plant Pathology
    • /
    • v.13 no.4
    • /
    • pp.200-204
    • /
    • 1997

  • The effect of water potential ($\psi_W$) and temperature on mycelial growth and sclerotial production of Sclerotium cepivorum was determined in potato dextrose agar(PDA) and potato dextrose broth (PDB) adjusted to different $\psi_W$ with NaCI, KCI, sucrose or polyethylene glycol (PEG) at 15, 20 and $25^{\circ}C$. the growth of mycellium was not significantly af. fected by $\psi_W$ values between -1,970 and -2,240J/Kg, but severely decreased lower than -2,240J/Kg. Dry weight was slightly increased at $\psi_W$values between -450 and -2,240 J/Kg. The reduction of dry weight wasslower than the reduction of mycelial growth as the $\psi_W$ decreased. The mycelial growth and dry weight were more severely influenced on PEG amended media than on other osmotica amended media. About 50% reduction of mycelial growth and dry weight was occurred about -1,000 and -2240 J/Kg, respectively. The production of sclerotion of sclerotial production occurred between -450 and -810 J/Kg. Sclerotium was not produced lower than -2,240 J/Kg. Mycelial growth and sclerotial production was better at $25^{\circ}C$ as the $\psi_W$ decreased than at $20^{\circ}C$ which is optimal temperaturein the undmended media. The influence of $\psi_W$ on mycelial growth and sclerotial production of S. cepivorum adjusted with NaCl, KCI sucrose or polyethylene glycol showed similar patterns.

  • PDF