• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1483-1486
• /
• 2002

In this paper, a new scheme of iterative loaming control of a robot manipulator is presented. The proposed method uses a fuzzy sliding mode controller(FSMC), which is designed based on the similarity between the fuzzy logic control(FLC) and the sliding mode control(SMC), for the feedback. With this, the proposed method makes possible fDr fast iteration and has advantages that no linear approximation is used for the derivation of the learning law or in the stability proof Full proof of the convergence of the fuzzy sliding base learning scheme Is given.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.64-72
• /
• 2004

An extension of interaction matrix formulation to the problem of system and disturbance identification for a plant that is corrupted by both process and output disturbances is presented. The teaming control develops controllers that learn to improve their performance at executing a given task, based on experience performing this task. The simplest forms of loaming control are based on the same concept as integral control, but operating in the domain of the repetitions of the task. This paper studies the use of such controllers in a decentralized system, such as a robot moving on the vertical plane with the controller for each link acting independently. The basic result of the paper is to show that stability and iterative precision of the learning controllers for all subsystems when the coupling between subsystems is turned off, assures stability of the decentralized teaming in the coupled system, provided that the sample time in the digital teaming controller is sufficiently short. The methods of teaming system are shown up for the iterative precision of each link.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.346-346
• /
• 2000

We proposed a method of second-order iterative learning control with feedback, which shows an enhancement of convergence speed and robustness to the disturbances in our previous study. In this paper, we show that the proposed second-order iterative learning control algorithm with feedback is more effective and has better convergence performance than the algorithm without feedback in the case of the existence of initial condition errors. And the convergence woof of the proposed algorithm in the case of the existence of initial condition error is given in detail, and the effectiveness of the Proposed algorithm is shown by simulation results.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.92-98
• /
• 2005

The learning control develops controllers that learn to improve their performance at executing a given task, based on experience performing this specific task. In a previous work, the authors presented an iterative precision of linear decentralized learning control based on p-integrated learning method for the vertical dynamic multiple systems. This paper develops an indirect decentralized teaming control based on adaptive control method. The original motivation of the teaming control field was loaming in robots doing repetitive tasks such as on an assembly line. This paper starts with decentralized discrete time systems, and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the nominal trajectory, and using the usual robot controllers that are decentralized, treating each link as if it is independent of any coupling with other links. Some techniques will show up in the numerical simulation for vertical dynamic robot. The methods of learning system are shown up for the iterative precision of each link.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.120-131
• /
• 2004

In this paper, we propose the method of a motion planning generation in which the movement of the 3-link leg subsystem is constrained to a slider-link and a singular posture can be easily avoided. The proposed method is the jumping control moving in vertical direction which mimics a cat's behavior. That is, it is jumping toward wall and kicking it to get a higher-place. Considering the movement from the point of constraint mechanical system, the robotic system which realizes the motion changes its configuration according to the position and it has several phases such as; ⅰ) an one-leg phase, ⅱ) in an air-phase. In other words, the system is under nonholonomic constraint due to the reservation of its momentum. Especially, in an air-phase, we will use a control method using state transformation and linearization in order to control the landing posture. Also, an iterative learning control algorithm is applied in order to improve the robustness of the control. The simulation results for jumping control will illustrate the effectiveness of the proposed control method.

• 한국산업정보학회논문지
• /
• 제11권2호
• /
• pp.40-47
• /
• 2006

반복학습제어는 특정목적 궤도의 반복작업을 수행하는 정밀도를 개선하는 제어기를 개발하는 기술이다. 기존 연구에서는 수직다물체의 반복정밀도를 개선하기 위하여 누적학습제어와 적응제어 기법을 한 반복영역에서 동시에 실시하는 기법을 개발하였다. 당초 이 기술은 생산조립라인의 산업용 로봇에서 발생하는 반복정밀도를 개선하기 위해 개발하였으며, 특히, 분산학습기법은 산업용 로봇에서 발생하는 실질적 제어 방식에 유효한 기법이다 본 논문에서 개발한 제어기술은 한 반복영역의 모든 시간대의 입출력 정보를 동시에 학습하기 보다는 매 시간대의 입출력 정보를 각 시간대 마다 충분히 학습하고 다음 시간대의 정보를 학습하는 것이다. 본 논문에서 개발한 기술을 산업용 로봇과 의료기기에 적용하면 수직다물체의 정밀도 품질보증 확보에 큰 기여를 하게 된다.

• 한국산업정보학회논문지
• /
• 제7권1호
• /
• pp.10-15
• /
• 2002

시스템 외란과 계측 외란이 겹친 플랜트의 시스템과 외란 인식기술의 확장성을 소개하고자 한다. 시스템의 수의 상한영역과 외란주파수의 상한영역내에서 외란제거 모형과 외란효과가 외란이 겹친 입출력자료로부터 정기적인 외란의 직접적인 측정없이 정확히 회복될 수 있음을 보여 주고 있다. 시스템 및 외란 인식으로 계산되어 활용되는 자료: 성능관점의 모형 기저 반복학습제어시스템에 사용할 수 있게 된다. 이는 원치 않는 정기적인 외란을 제거하기 위함이다. 반복학습제어와 시스템 및 외란인식기술을 응용하면 복합구조물의 정밀도 품질보증 확보에 큰 기여를 하게 된다.