• 대한전자공학회논문지TC
• /
• 제48권1호
• /
• pp.97-101
• /
• 2011

개인 휴대통신의 서비스 대역에 대응하는 4중 대역 p-HEMT SP6T 스위치를 구현하였다. 낮은 삽입손실과 높은 격리특성을 달성하기 위하여, 트랜지스터 단위소자의 최적화를 통해 On-Off간 상호 보완적 관계를 고려하였으며, 특히 송수선간 격리 특성의 경우, 큰 커패시터 삽입을 통하여 우수한 격리 특성을 달성하는 동시에 단일의 전압제어와 백비아를 사용한 접지를 통해 소형화를 달성하였다. 구현된 SP6T 스위치는 $950um{\times}100um$의 크기를 가지며 공정상 게이트 우물의 오류를 감안할 때, 각 주파수 대역에서 우수한 삽입손실 및 격리특성을 확인 할 수 있었다.

• 한국시뮬레이션학회논문지
• /
• 제20권4호
• /
• pp.41-48
• /
• 2011

개발 기능에 대한 단위시험 모듈을 구현할 경우 도메인 구현부와 시험 구현부의 종속성이 높기 때문에 단위시험 모듈의 재사용이 어렵다. 특히, 동일한 구조나 기반 프레임워크를 재사용하는 시스템의 경우 구성 소프트웨어의 내부 인터페이스를 위한 단위시험 모듈의 중복이 불가피하며, 통합 시험 코드는 해당 모듈 간 연동 인터페이스 구현에 종속되기 때문에 각 모듈의 개발 일정에 따라 단위시험 수행이 제한될 수 있다. 이러한 문제를 해결하기 위해서 TDD 기법 중 하나인 모형 객체(Mock Objects) 패턴을 이용한 단위시험 방법이 제안되었다. 이 방법은 도메인 모듈과 시험 모듈을 분리할 수 있도록 도메인 모듈을 대리하는 모형 객체를 생성하고, 해당 모형 객체를 시험 모듈과 통합함으로써 단위시험 모듈의 구현을 용이하게 한다. 본 논문은 HLA 시뮬레이션 시스템 개발에 참여하는 Federate의 Federation 통합 및 연동 시험을 용이하게 하기 위해서 모형 객체를 적용한 모형 Federate를 설계하고, 모형 Federate의 구성 모듈을 위한 테스트 프레임워크를 제안한다. 제안 프레임워크는 RTI 서비스를 위한 시험 함수를 제공하며, 해당 함수들은 xUnit 패턴에 의해 자동화 된다.

• 대한가정학회지
• /
• 제40권3호
• /
• pp.21-40
• /
• 2002

The aim of this interdisciplinary study is to understand the relationship between the social behavior patterns and space elements, specially micro-housing sociological point of view. It analyzed korean typical floorplans in the apartment housing, focused on the 4-criteria contact or isolation between the individual persons, communication between the generations, hierarchy of the gender and socialization with neighbourhood. It determinate concrete space elements involved correspondent factors with users' social behavior. By reviewing those factors found, it is suggested also the planning concept, that response users' social orientation. As the practical alternatives, some prototypes have been developed not only for improvement of housing plans, but also for resonable housing supply and sustainable usage.

• 소음진동
• /
• 제9권4호
• /
• pp.795-805
• /
• 1999

Rubber mounts so called grommets and pipes are two major paths of vibration transmission from a compressor, an important vibration source in an air conditioner, to the whole unit. A procedure of configuring the suction and discharge pipes of the compressor was developed in this paper so as to reduce the vibration transmission through the pipes as well as the grommets. Through investigating the effects of shapes and connecting disrections of pipe elements on vibration transmission, a guideline to configure the pipe layout, which enables to reduce vibration transmission, was proposed. The initial pipe layout by the guideline was optimized with the objective function, minimization of boty vibration transmission and the cost, and with the constraints to yield the final dimensions of the pipes. The procedure not only minimizes the transmitted force to the circumferential devices but enables to eliminate rubber blocks or dampers, which are generally used to avoid resonances of the pipe system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.187-190
• /
• 1999

This study is intended to present the properites of planting concrete using the light-weight aggregate and crushed aggregate. According to the result of experiment, the concrete using orchid stone shows a better performance in voids volume, unit weight, absorbtion, thermal conductivity and pH, which are helpful for planting and heat isolation. Therefore, if planting concrete used with orchid stone are utilized to be the planting base on the building's roof, it will be effective to reduced the cost of construction and heating due to the redution of building's self weight and heat isolation effection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.689-691
• /
• 1995

In this paper, a fault detection and isolation unit(FDIU) for a centrifugal pump system driven by DC-motor is proposed. The proposed scheme can be classified into the dedicated observer scheme(DOS). A fuzzy logic based inference engine is adopted for the isolation of each faults. Having the fuzzy inference engine, the proposed FDIU resolve a few important problems of the conventional DOSs with conventional two valued logic. The ouputs of the proposed FDIU are not "ith fault occurred" but the grade of memberships that indicate the consistency of observered symptoms(residuals) with each fault symptoms stored in the rule base. The ouputs can easily be transferred to the ranking of the fault possibilities and it will provide very useful informations in monitoring the process. The simulation results show that the FDIU has very good diagnostic ability even in the noisy environment.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.860-868
• /
• 2016

A bidirectional DC-DC converter (BDC) is an indispensable electrical unit for the electric vehicles (EVs). High efficiency, high power density, isolation, light weight and reliability are all essential requirements for BDC. In this paper, a 3 kW BDC for the battery charger of EVs is proposed. The proposed converter consists of a half-bridge structure on the primary side and an isolation transformer and a synchronous rectifier structure on the secondary side. With this topology, minimum number of switching devices are required for bidirectional power flow between the two dc buses of EVs. The easy implementation of the synchronous rectification gives advantages in terms of efficiency, cost and flexibility. The proposed BDC achieves high efficiency when operating in both modes (step-up and step-down). A 3 kW prototype is implemented to verify theoretical analysis and the performance of the proposed converter.

• BMB Reports
• /
• 제32권5호
• /
• pp.497-501
• /
• 1999

Biotinylation of recombinant proteins is a powerful tool for the detection and analysis of proteins of interest in a large variety of assay systems. The recent development of in vivo biotinylation techniques in E. coli has opened new possibilities for the production of site-specifically biotinylated proteins without the need for further manipulation after the isolation of the recombinantly expressed proteins. In the present study, a novel vector set was generated which allows the convenient cloning and expression of proteins of interest fused with an N-terminal in vivo biotinylated thioredoxin (TRX) protein. These vectors were derived from the previously reported pBIOTRX vector into which was incorporated part of the pBluescript II+phagemid multiple cloning site (MCS), amplified by PCR using a pair of sophisticated oligonucleotide primers. The functionality of these novel vectors was examined in this system by recombinant expression of rat transforming growth factor-$\beta$. Western-blot analysis using TRX-specific antibodies or peroxidase-conjugated streptavidin confirmed the successful induction of the fusion protein and the in vivo conjugation of biotin molecules, respectively. The convenience of molecular subcloning provided by the MCS and the effective in vivo biotinylation of proteins of interest makes this novel vector set an interesting alternative for the production of biotinylated proteins.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.409-416
• /
• 2005

For broadband high-data-rate power line communication with the allocated frequency bandwidth from 2 to 30 MHz on medium voltage (MV) distribution power lines, a signal coupling unit is developed. The coupling unit is composed of a coupling capacitor for coupling communication signal, a drain coil, and an impedance matching part. The coupling capacitor made of ceramic capacitor is designed for transmission property of better than 1 dB in the frequency range. The drain coil is used for preventing low frequency high voltage from junction of medium voltage power line in case that a coupling capacitor is not working properly any more. Also, using ferrite core, a novel broadband impedance matching transformer is developed. A complete coupling unit with a coupling capacitor, a drain coil, and a matching transformer is housed by polymer for good isolation and distinguishing from high voltage electric facilities. Each is fabricated and its frequency behavior is tested. Finally, complete signal couplers are equipped in a MV PLC test bed and their performance are measured. The measurement shows that the coupling capacitor works excellently.

• Journal of Microbiology and Biotechnology
• /
• 제9권5호
• /
• pp.613-618
• /
• 1999

L-Proline-producing mutant strains were developed by exposing L-glutamic acid-producing bacteria to N-metyl-N-nitro-nitrosoguanidine and UV irradiation. A L-histidine auxotroph of Corynebacterium acetoacidophilum RYU3161(KCTC 0616BP), which was resistant to sulfaguanidine and proline analogs (DHP, AZC, TAC), was isolated. The activity of the mutant strain's $\gamma$-glutamyl kinase was 45% higher than that of the parent strain. The optimum level of L-histidine for production of L-proline was 0.16 g/l. In a 5-1 jar fermenter, the mutant strain produced L-proline at a high concentration (35 g/l) level within 48 h of cultivation.