• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.954-954
• /
• 2005

In this study new vibration isolation system was designed so as to decouple translational motion and rotational motion of a workstation as well as to maximize an efficiency of vibration isolation. Whole motion of the workstation as well as the transmitted vibration from the floor were compared at the two conditions; with and without the cradle system. It was shown that the cradle system had a clear effect to suppress the roiling motion of the workstation.

• 한국인터넷방송통신학회논문지
• /
• 제22권2호
• /
• pp.35-42
• /
• 2022

본 논문에서는 SSPA(Solid state amplifier) 의 핵심 모듈인 결합기의 효율 및 격리 특성을 높이는 방법에 대해 연구하였다. 구체적으로 도파관 결합기에서 공용 포트와 격리 포트 정합을 이루어 격리도를 확보 하였다. 정합을 위한 매칭 구조는 원형 디스크 형태로 도파관 결합기 내부에서 음각으로 가공하게 된다. 구조는 매우 단순하여 안정적인 성능 확보가 가능하다. 그리고 이러한 구조는 이전 연구 대비 60배 이상의 높은 임계전력 성능을 보여 고출력에 적합함을 확인하였다. 그리고 1단의 T-junction과 2, 3단의 MagicT 결합기를 조합하여 소형화를 이루고, 삽입손실을 줄여 결합 효율을 최적화 하였다. 제작된 도파관 결합기는 16dB 이상의 격리도와 86.2% 의 결합 효율을 얻었다.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.64-70
• /
• 2010

In this study, hemicelluloses were pre-extracted from mixed hardwood chips using sodium hydroxide solution and then they were isolated from pre-extractives by using various solvents. Isolation was conducted by precipitating hemicelluloses with isopropanol, ethanol, 1,4-dioxane, dimethylsulfoxide (DMSO) and potassium hydroxide (KOH), respectively. The precipitate yield on alkali pre-extractives was the highest when hemicelluloses were isolated by DMSO and then precipitated with ethanol. Most precipitates were yellow colored. The efficiency of isolation was evaluated by analysing the characteristics of isolated hemicelluloses. Isolation using DMSO, KOH and 1,4-dioxane ($80^{\circ}C$) showed rather high efficiency. The highest total separation efficiency was about 77% when alkali pre-extractives were reacted with KOH and precipitated with ethanol. The quantity and purity of isolated hemicelluloses were affected by the solvent type.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.142-144
• /
• 2008

This paper is studied on the characteristic analyses of a high performance buck-boost converter added electric isolation by using a soft switching method. To be achieved of a high performance system, the proposed buck-boost converter is constructed by using a partial resonant circuit. The control switches using in the converter are operated with soft switching for a Partial resonant method. The controlling switches are operated without increasing their voltage and current stresses by the soft switching technology. The result is that the switching loss is very low and the converter efficiency is high. And the proposed converter is added in a electric isolation. When the power conversion system is required to electric isolation, the proposed converter is adopted with the system development of high efficiency. The soft switching operation and system efficiency of the proposed converter is verified by digital simulation and experimental results.

• Earthquakes and Structures
• /
• 제11권1호
• /
• pp.25-43
• /
• 2016

The uneven distribution of rolling friction coefficient may lead to great uncertainty in the structural seismic isolation performance. This paper attempts to improve the isolation performance of a spring-damper-rolling isolation system by artificially making the uneven friction distribution to be concave. The rolling friction coefficient gradually increases when the isolator rolls away from the original position during an earthquake. After the spring-damper-rolling isolation system under different ground motions was calculated by a numerical analysis method, the system obtained more regular results than that of random uneven friction distributions. Results shows that the concave friction distribution can not only dissipate the earthquake energy, but also change the structural natural period. These functions improve the seismic isolation efficiency of the spring-damper-rolling isolation system in comparison with the random uneven distribution of rolling friction coefficient, and always lead to a relatively acceptable isolation state even if the actual earthquake significantly differs from the design earthquake.

• 설비공학논문집
• /
• 제24권11호
• /
• pp.806-812
• /
• 2012

Air curtains are widely used in commercial and public buildings to replace solid doors where traffic of people is predicted. At doorways where the solid door is open continuously or intermittently, an air curtain may be installed in order to reduce the flow of heat and moisture from the enclosed space to the outside. The purpose of this paper is to predict isolation performance of the single-sided air curtain when the wind is blowing. For the study, a numerical simulation is used to find the influence of various jet velocities on the efficiency of the single-sided air curtain device which is mounted at the side of the doorway. The isolation performance of the single-sided air curtain is evaluated by sealing efficiency which provides the assessment of the infiltration air ratio. According to the result of this study, the single-sided air curtain has lower sealing efficiency than downward-blowing air curtain. Therefore, for energy conservation in heating space, the single-sided air curtain is not recommended because of its low effectiveness.

• Structural Engineering and Mechanics
• /
• 제40권3호
• /
• pp.315-334
• /
• 2011

Seismic isolated building structures are examined in this study. The triple concave friction pendulum (TCFP) is used as a seismic isolation system which is easy to be manufactured and enduring more than traditional seismic isolation systems. In the TCFP, take advantage of weight which pendulum carrying and it's geometry in order to obtain desirable result of seismic isolation systems. These systems offer advantage to buildings which subject to severe earthquake. This is result of damping force of earthquake by means of their internal constructions, which consists of multiple surfaces. As the combinations of surfaces upon which sliding is occurring change, the stiffness and effective friction change accordingly. Additionally, the mentioned the TCFP is modeled as of a series arrangement of the three single concave friction pendulum (SCFP) bearings. A two dimensional- and eight- story of a building with and without isolation system are used in the time history analysis in order to investigate of the effectiveness of the seismic isolation systems on the buildings. Results are compared with each other to emphasize efficiency of the TCFP as a seismic isolation device against the other friction type isolation system like single and double concave surfaces. The values of the acceleration, floor displacement and isolator displacement obtained from the results by using different types of the isolation bearings are compared each other. As a result, the findings show that the TCFP bearings are more effective devices for isolation of the buildings against severe earthquakes.

• 전기전자학회논문지
• /
• 제13권4호
• /
• pp.82-88
• /
• 2009

본 논문에서는 새로운 고효율의 절연형 스텝 업-다운 DC/DC 초퍼에 대해 해석하였다. 일반적으로 고효율의 초퍼를 만들기 위해서는 전력변환기내에 사용된 반도체 스위칭 소자의 손실이 최소화 되어야 한다. 본 논문에서는 부분공진 회로를 초퍼에 추가하여 고효율을 실현시킨다. 제안한 초퍼에 사용된 제어용 스위칭 소자들은 부분공진기법에 의해 소프트 스위칭으로 동작하고, 이에 따른 제어용 스위칭 소자들은 전압과 전류의 스트레스 없이 동작한다. 그 결과 제안한 초퍼는 스위칭 손실의 저감에 의해 고효율로 구동한다. 그리고 제안한 초퍼는 펄스 변압기를 이용하여 입력단과 출력단을 절연시켜, 전기적 절연이 요구되는 전력변환기들에 적용되어 고효율의 전력변환시스템을 개발할 수 있는 장점이 부여된다. 제안한 절연형 스텝 업-다운 초퍼의 소프트 스위칭 동작과 시스템 효율은 다양한 시뮬레이션과 실험결과를 통해 그 타당성이 입증된다.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.860-868
• /
• 2016

A bidirectional DC-DC converter (BDC) is an indispensable electrical unit for the electric vehicles (EVs). High efficiency, high power density, isolation, light weight and reliability are all essential requirements for BDC. In this paper, a 3 kW BDC for the battery charger of EVs is proposed. The proposed converter consists of a half-bridge structure on the primary side and an isolation transformer and a synchronous rectifier structure on the secondary side. With this topology, minimum number of switching devices are required for bidirectional power flow between the two dc buses of EVs. The easy implementation of the synchronous rectification gives advantages in terms of efficiency, cost and flexibility. The proposed BDC achieves high efficiency when operating in both modes (step-up and step-down). A 3 kW prototype is implemented to verify theoretical analysis and the performance of the proposed converter.

• 한국수정란이식학회지
• /
• 제33권4호
• /
• pp.327-336
• /
• 2018

To date, there are no protocols optimized to the effective separation of spermatogonial stem cells (SSCs) from testicular cells derived from mouse testes, thus hindering studies based on mouse SSCs. In this study, we aimed to determine the most efficient purification method for the isolation of SSCs from mouse testes among previously described techniques. Isolation of SSCs from testicular cells derived from mouse testes was conducted using four different techniques: differential plating (DP), magnetic-activated cell sorting (MACS) post-DP, MACS, and positive and negative selection double MACS. DP was performed for 1, 2, 4, 8, or 16 h, and MACS was performed using EpCAM ($MACS^{EpCAM}$), Thy1 ($MACS^{Thy1}$), or GFR ${\alpha}1$ ($MACS^{GFR{\alpha}1}$) antibodies. The purification efficiency of each method was analyzed by measuring the percentage of cells that stained positively for alkaline phosphatase. DP for 8 h, $MACS^{Thy1}$ post-DP for 8 h, $MACS^{GFR{\alpha}1}$, positive selection double $MACS^{GFR{\alpha}1/EpCAM}$, and negative selection double $MACS^{GFR{\alpha}1/{\alpha}-SMA}$ were identified as the optimal protocols for isolation of SSCs from mouse testicular cells. Comparison of the purification efficiencies of the optimized isolation protocols showed that, numerically, the highest purification efficiency was obtained using $MACS^{GFR{\alpha}1}$. Overall, our results indicate that $MACS^{GFR{\alpha}1}$ is an appropriate purification technique for the isolation of SSCs from mouse testicular cells.