• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.313-320
• /
• 2015

A 2-axis gimbal-type X-band antenna has been widely used to effectively transmit the high resolution image data from the observation satellite to the desired ground station. However, a discontinuous stepper motor activation for rotating the pointing mechanism in azimuth and elevation directions induces undesirable micro-vibration disturbances which can result in the image quality degradation of a high-resolution observation satellite. To enhance the image quality of the observation satellite, attenuating the micro-vibration induced by an activation of the stepper motor for rotational movements of the antenna is important task. In this study, we proposed a low-rotational-stiffness blade gear applied to the output shaft of the stepper motor to obtain the micro-vibration isolation performance. The design of the blade gear was performed through the structure analysis such that this gear is satisfied with the margin of safety rule under the derived torque budget. In addition, the micro-vibration isolation performance of the blade gear was verified through the micro-vibration measurement test using the dedicated micro-vibration measurement device proposed in this study.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.267-277
• /
• 2017

Base-isolation is now being adopted as a retrofitting strategy to improve seismic behaviour of reinforced concrete (r.c.) framed structures subjected to far-fault earthquakes. However, the increase in deformability of a base-isolated framed building may lead to amplification in the structural response under the long-duration horizontal pulses of high-magnitude near-fault earthquakes, which can become critical once the strength level of a fire-weakened r.c. superstructure is reduced. The aim of the present work is to investigate the nonlinear seismic response of fire-damaged r.c. framed structures retrofitted by base-isolation. For this purpose, a five-storey r.c. framed building primarily designed (as fixed-base) in compliance with a former Italian seismic code for a medium-risk zone, is to be retrofitted by the insertion of elastomeric bearings to meet the requirements of the current Italian code in a high-risk seismic zone. The nonlinear seismic response of the original (fixed-base) and retrofitted (base-isolated) test structures in a no fire situation are compared with those in the event of fire in the superstructure, where parametric temperature-time curves are defined at the first level, the first two and the upper levels. A lumped plasticity model describes the inelastic behaviour of the fire-damaged r.c. frame members, while a nonlinear force-displacement law is adopted for the elastomeric bearings. The average root-mean-square deviation of the observed spectrum from the target design spectrum together with a suitable intensity measure are chosen to select and scale near- and far-fault earthquakes on the basis of the design hypotheses adopted.

• 대한수의학회지
• /
• 제39권4호
• /
• pp.765-771
• /
• 1999

Unlike most Escherichia coli strains, E coli O157 : H7 didn't ferment sorbitol within 24h of incubation and showed a negative reaction for $\beta$-glucuronidase. We developed a new medium for the rapid isolation of E coli O157 : H7 using sorbitol MacConkey agar with cefixime, potassium tellurite and 4-methylumbelliferyl-${\beta}$-D-glucuronide (MUG) as a primary plating medium. The addition of $20{\mu}g/ml$ of vancomycin in enrichment broth for E coli O157 : H7 inhibited lots of Gram positive bacteria. Three strains (10.3%) of 29 non-O157 E coli strains and 3 strains (8.3%) of 36 Salmonella spp were inhibited at the $0.05{\mu}g/ml$ of cefixime and 23 strains (79.3%) of 29 non-O157 E coli strains and 12 strains (33.3%) of 36 Salmonella spp were inhibited at the $2.0{\mu}g/ml$ of potassium tellurite. But none of the E coli O157 : H7 was affected at these concentration. The addition of MUG at $100{\mu}g/ml$ level to sorbitol MacConkey agar with cefixime and potassium tellurite (CTM-SMAC) aided in the rapid isolation of E coli O157 : H7 from samples by checking sorbitol-negative and $\beta$-glucuronidase negative phenotypes simultaneously. In conclusion, inoculation of a positive in the O157 screening test from enrichment broth on CTM-SMAC appeared to be a rapid, cost-effective and sensitive method for the isolation of E coli O157 : H7.

• 가정과삶의질연구
• /
• 제19권6호
• /
• pp.77-93
• /
• 2001

The purpose of this study is investigated on the loneliness of childhood and related variables. 400 boys and girls were sampled far this study that they are elementary school 5th 6th located in IK-San, Kim-Je city. Survey was conducted by self-reported questionnaires and 380 questionnaires were finally used for the data analysis. The data analysis with SPSS Computer program were frequency, percentage, mean, 7- 1est, one-way ANOVA with Duncan's Multiple Range test and Multiple Regression Analysis. The results of this study can be summarized as follows : 1. Significant difference was founded in children's loneliness according to father's education, father's job mother's education, school grade, name satisfaction, body satisfaction, siblings, close relation friend number, family harmony, parent's love- acceptable. 2. Significant difference was founded in children's loneliness according to peer status degree (popular isolation aggression). Higher popular children was perceived lower in loneliness than lower popular children. Higher isolation children was perceived higher in loneliness than lower isolation. Higher aggression children was perceived higher in loneliness than lower aggressive in loneliness. 3. In the result of multiple regression analysis the influence on the loneliness be presented as follows in order of importance , peer status of isolation degree popular degree mother's job of self business, parent's love-acceptable, friends number. The result the above study indicates that peer status family harmony, parent's love- acceptable, child's psychological environmental variables influences on the loneliness but essential variables are influences peer status on the loneliness.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.260-267
• /
• 2023

We aimed to investigate the proportions of MTB- and NTM-positive tests and the distribution patterns of species isolated by contracted testing agencies in South Korea. Respiratory specimens submitted to contracted testing agencies in South Korea for AFB culture from January 2014 to December 2021 were included (533,713 specimens in total). Trends based on MTB and NTM detection, patient sex and age, culture medium type, and testing year were analyzed. MTB and NTM positive detection increased in the patients. The average ages of MTB- and NTM-positive patients increased in those aged ≥61 years. For solid culture, the MTB detection rate decreased from 5.9% in 2014 to 3.3% in 2018 and increased to 4.7% in 2021; the NTM detection rate increased from 2.1% in 2014 to 3.4% in 2018 and 3.7% in 2021. For liquid culture, the MTB detection rate decreased from 8.3% in 2014 to 5.5% in 2018 and increased to 6.0% in 2021; the NTM detection rate increased from 3.5% in 2014 to 5.5% in 2018 and decreased to 5.3% in 2021. An isolation ratio reversal between MTB and NTM was observed in 2018. In this study, we provide information on mycobacterial isolation rates and species distributions using AFB culture test results from Korea's referral laboratories. Increased MTB- and NTM-isolation rates were observed in individuals aged ≥60 years, indicating the need for regular testing and focused management for them. Expanding liquid culture applications, which show higher positivity rates than solid culture methods, is necessary.

• Tuberculosis and Respiratory Diseases
• /
• 제86권1호
• /
• pp.47-56
• /
• 2023

Background: There is a global increase in isolation of nontuberculous mycobacteria (NTM). The aim of the study was to analyze longitudinal trends of NTM identification and pattern of antimicrobial susceptibility testing. Methods: NTM recovery rates, distribution of NTM species identification, and antimicrobial susceptibility pattern of NTM at Pusan National University Yangsan Hospital between January 2016 and December 2020 were retrospectively analyzed. Results: A total of 52,456 specimens from 21,264 patients were submitted for mycobacterial culture, of which 2,521 from 1,410 patients were NTM positive over five years (January 2016 to December 2020). NTM isolation showed an increasing trend from 2016 to 2020 (p<0.001, test for trend) mainly caused by Mycobacterium avium complex. The vast majority of M. avium complex were susceptible to key agents clarithromycin and amikacin. For Mycobacterium kansasii, resistance to rifampin and clarithromycin is rare. Amikacin was the most effective drug against Mycobacterium abscessus subspecies abscessus and Mycobacterium subspecies massiliense. Most of M. subspecies massiliense were susceptible to clarithromycin, while the majority of M. abscessus subspecies abscessus were resistant to clarithromycin (p<0.001). Conclusion: There was an increasing trend of NTM isolation in our hospital. Resistance to key drugs was uncommon for most NTM species except for M. abscessus subspecies abscessus against clarithromycin.

• 대한수의학회지
• /
• 제28권1호
• /
• pp.89-97
• /
• 1988

Twenty-eight porcine rotavirus were isolated from piglets with diarrhoea in chonnam province. According to the age, 41 to 60 day old pigs showed the highest isolation frequency among the post weaning pigs. The characteristics of the field isolates were determined by electronmicroscopy(EM), immunofluorescent assay(FA), and electrophoretic migration patterns of the genome profiles. Some of the isolates showed remarkable haemagglutination activity against rabbit and dog erythrocytes, ranged from 4 to 2848, respectively. At least 3 serotypes of porcine rotavirus were recognized by serum neutralization test using serotype specific rotavirus hyperimmune sera.

• 한국식품영양과학회지
• /
• 제24권5호
• /
• pp.695-701
• /
• 1995

The ethanol extract of leaf mustard(Brassica juncea) exhibiting high antimicrobial activities was fractionated in the order of hexane, chloroform, ethylacetate and butanol fractions to test antimicrobial activity. The highest antimicrobial activity for the bacteria tested was found in the ethylacetate fraction, but a lesser extent in the butanol fraction. In contrast to antimicrobial activity for the bacteria, both ethylacetate and butanol fractions showed weak antimicrobial activity for yeasts. Unknown compound A in the ethylacetate fraction which exhibited a strong antimicrobial activity was isolated by silica gel column chromatography and HPLC, and exhibited 9 times more antimicrobial activity than the ethylacetate fraction.

• 한국유기농업학회지
• /
• 제6권2호
• /
• pp.117-125
• /
• 1998

For isolation of antagonistic fungi antagonistic to Phytophthora capsici, a total of 157 isolates of fungi were screened from soil. Among the 157 isolates further screened by the dual culture test on potato dextrose agar and V-8 juice agar, 16 isolates were tested to show their antagonistic activity against P. capsici and Fusarium oxysporum. Fungal cul-ture filtrates of screened 16 isolates were shown to inhibit germination of zoospoorangia of P. capsici entirely and conidia of F. oxysporum considerably. Antagonistic fungi were shown to suppress of P. capsici infection of red-pepper plants maintained in the green house. Four isolates. 27 J5, 37 J10, 36 J13 and 31 K10, with the reduced disease incidence 53.3∼60.0% were identified as Fusarium sp. (27 J5). Trichoderma sp. (37 J10, 36 J13) and Penicillium sp. (31 K10).

• 동력기계공학회지
• /
• 제21권3호
• /
• pp.66-73
• /
• 2017

In order to identify the design parameters of a hydraulic engine mount with a nonlinear characteristics, an experimental method has been used generally. The method takes a considerable time and expense because of preparing an experimental apparatus, conducting a test, and analyzing results. Therefore, this paper presents a simple method to identify the design parameters of a cylindrical hydraulic engine mount, and optimize the design parameters. The physical model and mathematical equations of the mount were derived, and values of the design parameters of the mount were identified by optimization method with minimizing difference between the analytical results with the equations and the experimental results. This method is more simpler than the conventional experiment method and identify successfully the design parameters. In addition, the technique can optimize the design parameters of the mount to improves the isolation performance of the mount.