• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.135-136
• /
• 2006

In this paper, isolation strategies for improving broadband circuit performance and preventing noise arising from circuit component coupling are presented. Equivalent circuit parameters, including parasitic elements, are determined for capacitor and inductor structures. The effects of the relative position of the components with regard to a ground plane are considered in the equivalent circuits. Novel meshed ground structures are investigated to determine a configuration that improves the overall circuit performance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.172-176
• /
• 2000

The paper presents the fault detection and isolation of two DC-DC converters parallel operation by ZCT method. Two experimental prototype converters were designed and implemented for evaluation of fault tolerant system. The experimental results show that fault detection and isolation circuit works very well.

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.167-173
• /
• 2005

직렬 PIN 다이오드 스위치의 격리도는 PIN 다이오드의 병렬 커패시턴스에 의해 제한을 받으며, 스위치 구동회로는 PIN 다이오드 스위치의 스위칭 속도를 제한한다. 이런 문제를 극복하기 위해, 병렬 공진 인턱턴스와 TTL 호환의 스위치 구동회로가 적용된 높은 격리도와 고속 스위칭의 PIN 다이오드 스위치를 제안하였다. 3 GHz PIN 다이오드 스위치의 측정 결과, 1 GHz의 주파수 대역폭, 1.5 dB 이내의 삽입 손실, 65 dB의 격리도, 15 dB 이상의 반사 손실 그리고 30 ns 이내의 스위칭 속도를 나타내었다. 특히, 병렬 공진 인덕턴스를 사용한 3 GHz스위치는 15 dB의 격리도 향상을 나타내었다.

• 대한전자공학회논문지SD
• /
• 제41권3호
• /
• pp.109-114
• /
• 2004

본 논문에서는 반도체 방식의 직접 터치식 용량 형 지문인식센서의 신호처리를 위한 회로를 제안하였다. 센서로부터의 용량의 변화를 전압의 신호로 전환하기 위해서 전하분할 방식의 회로를 적용하였다. 지문센서 감도저하의 가장 큰 원인인 센서 플레이트에 존재하는 기생용량을 제거하고 융선과 계곡 사이의 전압차를 향상시키기 위하여 기존과는 다른 아날로그 버퍼회로를 설계 적용하였다. 센서 하부회로와의 isolation 대책을 통하여 ESD 및 노이즈방지를 위한 설계를 실시하였다. 제안된 신호 처리회로는 0.35마이크론 표준 CMOS 공정에 의해 레이아웃 되었다.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1468-1479
• /
• 2015

Renewable energy resources such as wind and photovoltaic power generation systems demand a high step-up DC-DC converters to convert the low voltage to commercial grid voltage. However, the high step-up converter using a transformer has limitations of high voltage stresses of switches and diodes when the transformer winding ratio increases. Accordingly, conventional studies have been applied to series-connect multioutput converters such as forward-flyback and switched-capacitor flyback to reduce the transformer winding ratio. This paper proposes new single-ended converter topologies of an isolation type and a non-isolation type to improve power efficiency, cost-effectiveness, and output ripple. The first proposal is an isolation-type charge-pump switched-capacitor flyback converter that includes an extreme-ratio isolation switched-capacitor cell with a chargepump circuit. It reduces the transformer winding number and the output ripple, and further improves power efficiency without any cost increase. The next proposal is a non-isolation charge-pump switched-capacitor-flyback tapped-inductor boost converter, which adds a charge-pump-connected flyback circuit to the conventional switched-capacitor boost converter to improve the power efficiency and to reduce the efficiency degradation from the input variation. In this paper, the operation principle of the proposed scheme is presented with the experimental results of the 100 W DC-DC converter for verification.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.683-692
• /
• 2000

A new primary-side-assisted zero-voltage and zero-current switching full bridge DC-DC converter with transformer isolation is proposed. The auxiliary circuit adopted to assist ZCS for the leading leg is composed of only one small transformer and two diodes. It has a simple and robust structure, and load current control capability even in short circuit conditions. Possibility of magnetic saturation due to asymmetricity of circuits or transient phenomena is greatly reduced, which is a very attractive feature in DC/DC converters with transformer isolation. The power rating of the auxiliary transformer is about 10% of that of the main transformer. Operation of a 12.5KW prototype designed for welding application was verified by experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1349-1351
• /
• 2005

In this paper discusses isolation driver of single phase AC-DC reversible power converter The reversible power converter driven by binary combination at different transformer winding ratio by BCD code level. It has a advantage that constructs a control system simply and obtain load current of good quality with out filter circuit and free from noise or isolation for lower switching frequency. In this research, study on current type converter and inverter circuit that consist for possibility of AC-DC/BC-AC multi-level reversible converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.1-6
• /
• 2001

In this article, the fundamental concept, characteristics and application potentials of coreless printed-circuit-board (PCB) transformers are described. Coreless PCB transformers do not have the limitations associated with magnetic cores, such as the frequency limitation, magnetic saturation and core losses. In addition, they eliminate the manual winding process and its associated problems, including labor cost, reliability problems and difficulties in ensuring transformer quality in the manufacturing process. The parameters of the printed windings can be precisely controlled in modern PCB technology. Because of the drastic reduction in the vertical dimension, coreless PCB transformers can achieve high power density and are suitable for applications in which stringent height requirements for the circuits have to be met. A transformer's power density of $24W/cm^2$ has been reported in a power conversion application. When used in an isolation amplifier application, coreless PCB transformers tested so far enable the amplifier to achieve a remarkable linear frequency range of 1MHz, which is almost eight times higher than the frequency range of 120kHz in existing Integrated-Circuit products. PCB materials offer extremely high isolation voltage, typically from 15kV to 40kV, which is higher than many other isolation means such as optocouplers. It is envisaged that coreless PCB transformers can replace traditional core-based transformers in some industrial applications. Their application potentials deserve more attention and exploration.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.924-929
• /
• 2009

본 논문에서는 차세대 USB dongle 적용을 위한 대역 저지 특성 정합 회로를 갖는 이중 대역 MIMO 안테나를 제안한다. 제안된 이중 대역 MIMO 안테나는 광 대역 특성을 갖는 두 개의 이중 대역 PIFA로 구성된다. LTE 대역의 격리도 특성을 개선하기 위해서, 대역 저지 특성을 갖는 정합 회로가 각각의 안테나 끝부분에 삽입되었다. 삽입된 대역 저지 특성을 갖는 정합 회로는 특정 주파수에서 표면 전류를 억압할 수 있고, LTE 대역의 770 MHz와 DCN 대역의 830 MHz에서 추가적인 공진을 발생시킨다. 제안된 MIMO 안테나는 LTE 대역과 DCN 대역을 동시에 만족시킨다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.319-322
• /
• 1998

In this paper we further propose to add a very simple regenerative clamping circuit to SSIPP to reduce the voltage stress and to recycle the energy trapped in the leakage inductance of the isolation transformer, thus eliminating the need for a lossy snubber circuit. In addition, this proposed clamping circuit also provides a mechanism to reset the magnetizing current of the output transformer of SSIPP employing a Forward converter as the output stage. Simulations and experimental results are reported to verify the operation and performance of the SSIPP with regenerative clamping.