• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.278.2-278.2
• /
• 2014

We have investigated the highly flexible and transparent Si-doped $In_2O_3$(ISO)/Ag/ISO multilayer grown on polyethylene terephthalate (PET) substrates using a roll-to-roll sputtering system. The electrical and optical properties of ISO/Ag/ISO multilayer electrodes depended on the insertion of a nano-size Ag layer. Due to the high conductivity of a nano-size Ag layer, the optimized ISO/Ag/ISO multilayer electrodes showed the lowest resistivity of $3.679{\times}10^{-5}Ohm-cm$, even though the ISO/Ag/ISO multilayer electrodes was sputtered at room temperature. Furthermore, the ISO/Ag/ISO multilayer electrodes exhibited a high transmittance of 86.33%, because of the anti-reflection effect, comparable to Sn-doped $In_2O_3$ (ITO) electrodes. In addition, the ISO/Ag/ISO multilayer electrodes had a very smooth surface morphology without surface defects and showed good flexibility. The flexible OSCs fabricated on ISO(30nm)/Ag(8nm)/ISO(30nm) multilayer electrode showed a power conversion efficiency of 3.272%. This result indicates that the ISO/Ag/ISO multilayer is a promising transparent conducting electrode for flexible OSCs.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.85-85
• /
• 2017

ISO (International Organization for Standardization) is an independent, non-governmental international organization with a membership of 163 national standards bodies (NSB). The ISO standards are developed and processed within the technical committees (TC) or their subcommittees (SC) dealing with the different subject matters. The first technical committee, ISO/TC1, deals with screw threads and was created back in 1947. While, more recently, TC 309 was created to standardize organizational governance. The ISO technical committee in the field of metallic coatings was created in 1962 with the title ISO/TC107- Metallic and other inorganic coatings. This ISO/TC107 technical committee is dealing with the standardization of the characteristics of protective and decorative metallic coatings applied by electrolysis, fusion, vacuum or chemical means, mechanical deposition and ion plating. similarly, it also covers the standardization of the characteristics of protective and decorative non-metallic coatings (excluding paints and other organic coatings) on metal surface applied by electrolysis, fusion, vacuum or chemical means. Scope is further extended to the Standardization of the preparation of the substrates prior to the deposition of metallic and inorganic coatings. There are a total of 144 existing ISO standards published by this technical committee and has 19 participating countries (P-members) and 24 observing countries (O-members). Korean Agency for Technology and Standards (KATS), being the secretariat of ISO/TC107, is constantly supporting this technical committee for the development of standards and related activities.

• 한국컴퓨터그래픽스학회논문지
• /
• 제3권2호
• /
• pp.85-97
• /
• 1997

이 연구의 목적은 유한요소법에 의해 계산된 3차원 고체의 응력 분포를 등가면 (iso-surface)을 이용하여 이해하기 쉽게 가시화하는 방법을 제시하고, 이와 관련된 효율적인 알고리즘을 개발하며, 등가면 표시방법의 실용적 응용방법을 개척하는데 있다. 이 논문은 등가변을 생성하는 방법과, 생성된 등가연의 국부적인 불규칙성을 제거하고, 연속적이며 완만하게 굴곡된 곡면으로 평활화하는 방법을 제시하였다. 등가면을 이용한 여러가지 응력 표시방법을 고안하고, 이들의 실제적인 이행과 사례적인 실행을 통해서 그 실용성과 효용성을 검토하였다.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.116-121
• /
• 2005

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass by the noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected. The pass by noise test is done according to a 2001/43/EC regulation. Although the ISO surface has a very specific track composition, it does not reduce the variation of pass by noise measurements over the surface of test sites. This paper shows that the test results of pass by noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. The prediction value is range with an error within 1dB(A).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.252-256
• /
• 2001

Scattering of surface materials has been known as one of the most important aspects in evaluating the acoustics of concert halls are designed. One of the methods that can reduce the errors in estimating the reverberation time and other acoustic parameters through computer modeling is to calculate scattering coefficient of surface materials. However. so far, no objective and reliable methods measuring scattering coefficient has been suggested. In this situation, ISO has suggested the method of measuring the random-incidence scattering coefficient on surfaces in diffuse field, whereas AES has introduced a method on directional-incidence in free field. In this study, the scattering coefficients of five kinds of hemispheres (1.5, 2.0. 2.5. 3.0. 3.5cm) were measured by using the ISO method in 1：10 reverberation chamber. It was found that 3.0cm hemisphere has the highest scattering coefficient satisfying 95％ reliability.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.285-290
• /
• 1993

A series of samples were prepared by treating natural zeolite from Kampo area with HCl and NaOH. And, the adsorption characteristics of some liquid samples were investigated by the Diamond-Kinter method. The adsorption amount of all liquid investigated was more effective in acid treatment than in alkali treatment. In the case of n-, iso-C3H7OH, thed adsorption amount of n-form which has smaller molecular size was larger. Similar tenedncy was observed in n-, iso-C4H9OH, but the amount was lower than n-, iso-C3H7OH. In CHCl3 and CCl4, that of CHCl, which is smaller molecular size and has polarity, was far lager. From the view of the molecular size, adsorption amount of C6H5CH3 and p-C6H4(CH3)2 showed the characteristics of surface activity rather than chemical treatment.

• 한국멀티미디어학회논문지
• /
• 제25권6호
• /
• pp.793-806
• /
• 2022

As the IMO introduced MASS (Maritime Autonomous Surface Ships), ISO(International Organization for Standardization) announced ISO 19847 of a maritime data sharing standard for collecting and remotely managing data of ship systems. Previous literature evaluated the risk using HAZOP for ISO 19847 and proved that risk assessment is useful through experiments. However, redundancy of ISO 19847 ship data server which is one of the risk reduction method suggested in previous literature, was designed but couldn't tested due to the limitations of the conditions. So, in this study, to prove the usefulness of the ship data server redundancy of ISO 19847 which was not tested in previous literature. It based on the design of previous literature, and the network of ship data servers was modeled using the SES/DEVS format and simulated using the DEVS# open source library.

• 공업화학
• /
• 제5권1호
• /
• pp.105-113
• /
• 1994

Spherocarb와 Sucrose Char에 의해 흡착된 질소가스의 양은 온도를 77K에서 184K가지 일정하게 유지시키면서, 상대적 압력의 함수로서 측정되었다. 다른 온도에서의 Isotherm은 흡착제를 일정한 온도에서 유지시키면서, 액화질소, iso-펜탄, n-펜탄, 에틸알코올과 iso-프로필 알코올의 Slush bath를 사용하여 얻어졌다. 이 연구의 목적은 BET와 D-R 같은 흡착모델을 사용하여, 실험적 데이타를 분석함으로써, 비표면적과 세공부피에 대한 정보를 얻는데 있다.

• International Journal of Safety
• /
• 제7권1호
• /
• pp.26-29
• /
• 2008

The purpose of this study is the measurement of whole-body vibration for different road surfaces. Experimental measurements were taken on asphalt, cement, and off-road surfaces as defined by ISO 2631-1. Each experiment was conducted under the same set of conditions (measurement duration, times, speed, vehicle type). Measurement duration was 10 minutes and 3 separate measurements were taken on each road surface. Vehicle speed was 60km/h. In accordance with ISO 2631-1, an acceleration sensor is set up between the driver's seat and the human body. For evaluation, RMS(root-mean-square) values were taken as suggested by ISO 2631-1. The results suggest "health guidance caution zones", and the evaluation was based on obtaining the vector sum with "health guidance caution zones".

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.371-376
• /
• 2003

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass-by-noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected.. The pass by noise test is executed according to a 2001/43/EC regulation. A]though the ISO surface has a very specific track composition, it does not reduce the variation of pass-by-noise measurements over the surface of test sites. This paper shows that the test results of pass-by-noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. 17he prediction value is range with an error within 1dB(A).