• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.21 no.2
• /
• pp.123-130
• /
• 2014

Purpose: The purpose of this study was to identify quality of sleep and health-promoting behaviors in rotating-shift nurses and to explore the influence of health promoting behaviors on quality of sleep. Method: Participants were 161 staff nurses working in an irregular three shift system in one of three general hospitals located in Kyungpook province. Data were collected using the Pittsburgh Sleep Quality Index and the Health Promoting Lifestyle Profile-IIand were analyzed using hierarchical multiple regression analysis. Results: The majority of the participants had very poor quality of sleep and performed a low level of health promoting behaviors. In terms of health promoting behaviors, nutrition and stress management significantly influenced quality of sleep of these nurses. Conclusion: Results indicate the importance of encouraging rotating-shift nurses to enhance their health promoting behaviors in order to improve quality of sleep.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.7-13
• /
• 2008

It is important to prevent roll failure in hot rolling process for reducing maintenance cost and production loss. The relationship between rolling pass schedule and the work roll wear profile will be presented. The roll wear pattern is related with roll catastrophic failure. The irregular and deep roll wear pattern should be removed by On-line Roll Grinder(ORG) for roll failure prevention. In this study, a computer roll wear prediction model under real process working condition is developed and evaluated with hot rolling pass schedule. The method of building wear calculation functions for center portion abrasion and marginal abrasion respectively was used to develop a work roll wear prediction mathematical model. The three type rolling schedule are evaluated by wear prediction model. The optimum roll grinding methods is suggested for schedule tree rolling technique.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.11 no.2
• /
• pp.68-83
• /
• 2007

Background and Purpose: According to chaos theory, irregular signals of electroencephalogram can interpretated by nonlinear method. Chaotic nonlinear dynamics in EEG can be studied by calculating the correlation dimension. The aim of this study is to analyze EEG by correlation dimension and do Correlation Analysis of correlation dimension and K-POMS factors score. Method: EEG raw data were measured during 15 minutes and choosed 40 seconds. We calculated correlation dimension and used surrogate data method for checking nonlinear data. After then do correlation analysis. Result and Conclusion: Correlation dimension of channel 6, channel 7 and channel 8 are showed significant correlation with vigor factor.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.242-254
• /
• 2016

This paper is the forth investigation on the evaluation methods of flow characteristics in a steady flow bench. In the previous works, it was concluded that the assumption of the solid rotation might cause serious problems and both of the eccentricity and the velocity profile distort the flow characteristics when using the ISM at 1.75B plane. Also particle image velocimetry (PIV) measurement at this position showed that the real velocity profile was far from the assumption of ISM evaluation. In this paper, the planar velocity profiles were measure from 1.75B to 6.00B position by PIV and the characteristics were examined according to the valve angles and lifts for further investigations about the effect of the position on the velocity profile. The results show that $26^{\circ}$ valve angle is always an unique exceptional case in all aspects. If the valve angle is $21^{\circ}$ and below, the planar velocity profiles according to the lift and the position are similar to each other, however, the tangential velocity curves along with the radial direction have common tendencies up to $16^{\circ}$ angle. Also the well arranged swirl behaviors are generally observed at the position above 3.00B and the velocity contour lines come closer to the concentric circle as the valve lift increases. In addition, the gradient of tangential velocity along with the radial direction from the swirl center becomes stable and constant as the position goes downstream. Concurrently the velocity gradient is larger to the eccentric direction of the center. In the meantime the tangential velocity curves along with the radial direction are irregular and various at 1.75B, however, they become regular and reach higher level as the evaluation position goes downstream. At this time the curves of 4.50B are the best fitted to the ideal one. On the other hand in an exceptional case, $26^{\circ}$, the velocity contours are very complicated over 6mm valve lift regardless the position and the gradient increases to the opposite direction of the eccentric center. Also, 6.00B is a best fitting position in the geometrical cylinder center base. With respect to the swirl center, the distribution range of centers for 1.75B is different to that for the other positions and the eccentricities of this plane are larger regardless the valve angle. After 1.75B, there is no certain tendency in the center position change according to the valve angle and lift. Additionally, the eccentricities are not sufficiently small to neglecting the effect on ISM measurement.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.79-84
• /
• 2002

The main cause factor for effective the output, especially in small & irregular shaped field of electron beam therapy, are collimation system, insert block diameter and energy. In the absorption deose of treatment fields, we should consider the lateral build-up ratio (LBR), which the ratio of dose at a point at depth for a given circular field to the dose at the same point for a 'broad-field', for the same incident fluence and profile. The LBR data for a small circular field are used to extract radial spread of the pencil beam, ${\sigma}$, as a function of depth and energy. It's based on elementary pencil beam. We consider availability of the factor, ${\sigma}$, in the small & irregular fields electron beam treatment.

• Korean Journal of Animal Reproduction
• /
• v.17 no.3
• /
• pp.221-232
• /
• 1993

Morphological changes in the uterine and vaginal epithelial cells of the Korean native goats were studied in fifteen primiparous goats slaughtered on the day of parturition and on days 1, 3, 10 and 21 postpartum. 15 uterus and vagina from goats were examined by scanning and transmission electron microscopy. The results obtained in this study were summarized as follows : 1. Transmission electron microscopically, long microvilli which sometimes ramified were found until 10 days postpartum, while short microvilli were found at 21 days. The high electron dense irregular-shaped mitochondria were found in the cytoplasm and the crystalline structure of the mitochondrial matrix was also found from 1 day to 10 days postpartum. Well-developed rough-endoplasmic reticulum (rER) with dilated cisternae which contained the proteins materials was observed at 21 days postpartum. These materials were fused each other and then large granules were found in the free surface of the cytoplasm. A few lipid droplets were generally appeared in the cytoplasm, while numerous droplets were found at 21 days postpartum. A moderate number of ribosomes, a few multivesicular bodies, vesicles, lysosomes and macrophages were found. The globule leucocytes were observed from 0 to 3 days postpartum by transmission electron microscopy. The short microvilli, high electron dense cytoplasm and severe indentation of the nuclear enbelope were found in the vaginal epithelium. Numerouos small vesicles and a few vacuoles were observed in the apical cytoplasmic portion of the epithelium. A few mitochondria were high electron dense and irregular in shape. A moderate amounts of microfilaments, loose intercellular space and dilated rER were also found at 21 days postpartum. 2. Scanning electron microscopically, the folds of the uterine mucosa were generally deep. The long microvilli of the epithelium were found until 3 days postpartum, while short microvili were found at 10 and 21 days postpartum. The distinct intercellular boundary was seen. The apporcine secretory profile of the epithelium observed at between 3 and 10 days postpartum and the cells were somewhat protruded into the lumen. The short microvilli were found on the surface of the protruded cells, while polygonal microridge profile of the epithelium and some dome-shaped epithelium were also observed at 21 days postpartum. The folds of the vaginal mucosa were deep and epithelium was polygonal in shape. The microvilli of the epithelium were long until 3 days postpartum, while they were short at 10 and 21 days. The polygonal epithelium was invaginated into the center of the cell surface until 10 days postpartum. The microridge and dome in shape of the epithelium were found at 10 days postpartum, while the polygonal and exfoliating epithelium were observed at 21 days.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.300-305
• /
• 2011

Objectives: The aim of this study was to evaluate the various NiTi rotary instruments regarding their ability to provide a circular apical preparation. Materials and Methods: 50 single canal roots were selected, cut at the cementodentinal junction and the coronal 1/3 of the canals was flared using Gates Glidden burs. Samples were randomly divided into 5 experimental groups of 10 each. In group I, GT files, Profile 04 and Quantec #9 and #10 files were used. In Group II Lightspeed was used instead of Quantec. In Group III, Orifice shaper, Profile .06 series and Lightspeed were used. In Group IV, Quantec #9 and #10 files were used instead of Lightspeed. In Group V, the GT file and the Profile .04 series were used to prepare the entire canal length. All tooth samples were cut at 1 mm, 3 mm and 5 mm from the apex and were examined under the microscope. Results: Groups II and III (Lightspeed) showed a more circular preparation in the apical 1mm samples than the groups that used Quantec (Group I & IV) or GT files and Profile .04 series.(Group V)(p < 0.05) There was no significant difference statistically among the apical 3, 5 mm samples. In 5 mm samples, most of the samples showed complete circularity and none of them showed irregular shape. Conclusions: Lightspeed showed circular preparation at apical 1 mm more frequently than other instruments used in this study. However only 35% of samples showed circularity even in the Lightspeed Group which were enlarged 3 ISO size from the initial apical binding file (IAF) size. So it must be considered that enlarging 3 ISO size isn't enough to make round preparation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2009

In recent years, there's been strong demand for coastal structures that have a permeability that serves water affinity and disaster prevention from wave attack. The aim of this study is to examine the wave transformation, including wave run-up that propagates over the coastal structures with a steep slope. A numerical model based on the nonlinear shallow water equation, together with the unsteady nonlinear Darcy law for fluid motion in permeable underlayer and laboratory measurements was carried out in terms of the free surface elevations and fluid particle velocities for the cases of regular and irregular waves over 1:5 impermeable and permeable slopes. The numerical results were used to evaluate the application and limitations of the PBREAK numerical model. The numerical model could predict the cross-shore variation of the wave profile reasonably, but showed less accurate results in the breaking zone that the mass and momentum influx is exchanged the most. Except near the wave crest, the computed depth averaged velocities could represent the measured profile below the trough level fairly well.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.806-816
• /
• 2009

Character recognition system consists of four step; text localization, text segmentation, character segmentation, and recognition. The character segmentation is very important and difficult because of noise, illumination, and so on. For high recognition rates of the system, it is necessary to take good performance of character segmentation algorithm. Many algorithms for character segmentation have been developed up to now, and many people have been recently making researches in segmentation of touching or overlapping character. Most of algorithms cannot apply to the text regions of management number marked on the slab in steel image, because the text regions are irregular such as touching character by strong illumination and by trouble of nozzle in marking machine, and loss of character. It is difficult to gain high success rate in various cases. This paper describes a new algorithm of character segmentation to recognize slab management number marked on the slab in the steel image. It is very important that pre-processing step is to convert gray image to binary image without loss of character and touching character. In this binary image, non-touching characters are simply separated by using vertical projection profile. For separating touching characters, after we use combined profile to find candidate points of boundary, decide real character boundary by using method based on recognition. In recognition step, we remove noise of character images, then recognize respective character images. In this paper, the proposed algorithm is effective for character segmentation and recognition of various text regions on the slab in steel image.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.262-272
• /
• 2015

Loss of molar support and abnormal jaw relationship lead to occlusal disharmony and cause pathologic signs. Full mouth rehabilitations with reestablishment of occlusal schemes are needed. In this case, the 75 year-old female patient showed posterior bite collapse, irregular occlusal plane and Class II jaw relationship. By observing her profile and interocclusal distance, she was diagnosed as loss of occlusal vertical dimension. Treatment plan is to restore maxillay class I removable partial denture and mandibular fixed prosthesis and to establish vertical dimension and harmonious occlusal plane. Occlusal vertical dimension of 19 mm, which is obtained by 7.5 mm increase between maxillary right lateral incisor and mandibular canine, was established using temporary prosthesis via diagnostic wax-up. Patient adaptation with newly formed vertical dimension was verified during 8 week follow-up period. Within the information of interim prostheses, final restoration was constructed and delivered. The patient showed sound occlusal scheme and esthetic profile.