• 환경위생공학
• /
• 제17권3호
• /
• pp.14-20
• /
• 2002

In order to improve the quality and sensory evaluation of Fermented Soybean(Chungkugjang meju) were investigated. The samples were prepared and fermented by the inoculation of Bacillus strains (B. subtilis, number 1, B. natto, number 2) that the product made With sanitary canned food. 1. The water content of samples was 46.75~50.60%, pH 5.35~6.95 and total acidity 3.26~3.62. 2. The reducing sugar of content for sample was 9.49~10.05%, Amino-N, 67~396mg% and the activity of protease was 0.36~1.49unit/g. 3. The heavy metals analyzed from sample cans, iron, tin and lead content of sample were 5.32~5.84ppm, 27.31~29.04ppm and 0.019~0.021ppm. 4. Therefore, results that Chungkugjang-meju manufactured from B. natto starter induced better product Quality and sensory test than that of the B. subtilis strain.

• 보존과학회지
• /
• 제28권3호
• /
• pp.257-264
• /
• 2012

고대의 거울은 청동으로 만들어지는 것이 일반적이며, 철제거울의 경우 국내에서 출토된 예를 찾아보기는 매우 드물다. 본 연구에서는 불명철기의 보존처리과정에서 원형을 찾아 그 대상이 철제거울임을 밝혀냈으며, 그 과정에서 부식되지 않은 시편을 채취하여 광학현미경과 미세경도시험기, SEM-EDS를 이용하여 미세조직을 분석하고 이를 통해 제작기법을 연구하였다. 그 결과 철제거울의 조직은 비금속개재물이 거의 없고 시편 일부에서 망상 시멘타이트 조직이 관찰되는 것으로 미루어 주철을 부어 만든 거울을 고체상태에서 탈탄시켜 탄소량을 낮춘 고체탈탄강으로 판단된다. 주조품의 백주철 조직은 높은 탄소 함량으로 우수한 경도를 가져 절삭이나 연마가 어렵다. 때문에 주조된 철제거울의 거친 경면을 연마할 수 있도록 CO 또는 $CO_2$를 차단하여 $850^{\circ}C$이하의 온도에서 탈탄시켜 주조품의 경도를 낮춘 것으로 추정된다. 따라서 탄소 함량에 따른 조직의 변화가 관찰된 것으로 판단된다.

• 한국자기학회지
• /
• 제8권1호
• /
• pp.6-12
• /
• 1998

플라즈마 이온주입 장치를 이용하여 $\alpha$-Fe foil에 질소 이온을 주입하여 질화철 결정상을 만들었으며, 이때 질소 이온 주입시간을 15분(FEN15)과 30분 (Fe30)으로 처리되었다. 오제 전자 분광법(Auger electron spectroscopy : AES)을 이용하여 측정한 주입된 질소 이온의 깊이는 사편 FeN15와 FeN30에서 각각 12000$\AA$과 40000$\AA$으로 나타난다. 진동 시편 자력계(vibrating sample magnetometer : VSM)측정결과 as-implanted 각각의 시편은 포화자화 값이 순수한 $\alpha$-Fe foil 보다 증가되었으며, 이는 $\alpha$'-Fe8N 또는 $\alpha$'-Fe16N2의 결정구조가 그원인으로 판단된다. 따라서 본 연구는 플라즈마 이온주입 방법으로 제작된 질화철에서 부분적인 $\alpha$'또는 $\alpha$'의 졀정구조 형성 가능성을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3177-3183
• /
• 2012

The carbon nanofibers (CNFs) used in this study were synthesized with an iron catalyst and ethylene as a carbon source. A concentration of 30 wt % iron(III) acetylacetonate was dissolved in resol type phenol resin and polyurethane foam was put into the solution. The sample was calendered after being cured at $80^{\circ}C$ in air for 24 h. Stabilization and carbonization of the resol type phenol resin and reduction of the $Fe^{3+}$ were completed in a high-temperature furnace by the following steps: 1) heating to $600^{\circ}C$ at a rate of $10^{\circ}C/min$ with a mixture of $H_2/N_2$ for 4 h to reduce the $Fe^{3+}$ to Fe; 2) heating to $1000^{\circ}C$ in $N_2$ at a rate $10^{\circ}C/min$ for 30 minutes for pyrolysis; 3) synthesizing CNFs in a mixture of 20.1% ethylene and $H_2/N_2$ at $700^{\circ}C$ for 2 h using a CVD process. Finally, the structural characterization of the CNFs was performed by scanning electron microscopy and a synthesis analysis was carried out using energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Specific surface area analysis of the CNFs was also performed by $N_2$-sorption.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.223-229
• /
• 2020

Here magnetic iron oxide particles (MIOPs) were synthesized under atmospheric air and which size was controlled by regulating the flow rate of alkali addition and used for efficient removal of bovine serum albumin (BSA) from water. The MIOPs were characterized using field-emission scanning electron microscopy (FE-SEM), Fourier transformation-Infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM). The results revealed a successful preparation of the MIOPs. The removal efficiency for BSA using MIOPs was found to be about 100% at lower concentrations (≥ 10 mg/L). The maximum adsorption of 64.7 mg/g for BSA was achieved as per the Langmuir adsorption model. In addition, microfiltration membrane for removal of BSA as model protein organic foulant is also studied. The effect of various MIOPs adsorbent sizes of 210, 680 and 1130 nm on the absorption capacity of BSA was investigated. Water permeability of the BSA integrated with the smallest size MIOPs membrane was increased by approximately 22% compared by the neat BSA membrane during dead-end filtration. Furthermore, the presence of small size MIOPs were also effective in increasing the permeate flux.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.14-21
• /
• 2016

This study evaluated the applicability of stabilization of arsenic (As)-contaminated soil with iron (Fe) oxides at the former Janghang smelter site. Three Fe oxides (magnetite, goethite, and hematite) were tested as stabilizing agents to one soil sample collected from the study site. Amendment of 5% of magnetite, goethite, or hematite for one week showed the 64, 58, and 36% of reduction of the SBRC (Solubility/Bioavailability Research Consortium)-extractable (bioaccessible) As, respectively. Duration of stabilization more than one week did not show an additional reduction in SBRC-extractable As. Amendment of 5% of magnetite, which showed the highest As stabilization efficiency, was applied to 24 soil samples collected from the same site for one week, and 72% of reduction in the bioaccessible As was observed. The potential carcinogenic human health risk at the study site caused by As was $1.7{\times}10^{-5}$, which could be reduced to $8.1{\times}10^{-6}$ by the amendment of 5% magnetite for one week.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.481-486
• /
• 2019

Iron oxides currently attract considerable attention due to their potential applications in the fields of lithiumion batteries, bio-medical sensors, and hyperthermia therapy materials. Magnetite (Fe₃O₄) is a particularly interesting research target due to its low cost, good biocompatibility, outstanding stability in physiological conditions. Hydrothermal synthesis is one of several liquid-phase synthesis methods with water or an aqueous solution under high pressure and high temperature. This paper reports the growth of magnetic Fe₃O₄ particles from iron powder (spherical, <10 ㎛) through an alkaline hydrothermal process under the following conditions: (1) Different KOH molar concentrations and (2) different synthesis time for each KOH molar concentrations. The optimal condition for the synthesis of Fe₃O₄ using Fe powders is hydrothermal oxidation with 6.25 M KOH for 48 h, resulting in 89.2 emu/g of saturation magnetization at room temperature. The structure and morphologies of the synthesized particles are characterized by X-ray diffraction (XRD, 2θ = 20°-80°) with Cu-kα radiation and field emission scanning electron microscopy (FE-SEM), respectively. The magnetic properties of magnetite samples are investigated using a vibrating sample magnetometer (VSM). The role of KOH in the formation of magnetite octahedron is observed.

• 한국안광학회지
• /
• 제12권2호
• /
• pp.13-17
• /
• 2007

열증착법으로 제작한 강자성체인 철박막에서 전류와 자기장이 이루는 각도의 변화에 따른 자기저항의 변화를 관찰하였다. 이방상자기저항현상에서 철박막인 경우에는 박막면이 중간자화용이축이므로 PMR 에서 NMR로의 전이가 $34^{\circ}$에서 일어나며 전류가 박막면에 수직인 현상에서는 자기저항피크간격이 니켈박막보다 더 크게 나타나지만 자기저항피크간격의 증가율은 비슷한 경향성을 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2279-2282
• /
• 2007

Highly crystalline, uniform Fe nanoparticles were successfully synthesized and encapsulated in zirconia shell using sol-gel process. Two different approaches have been employed for the coating of Fe nanoparticle with zirconia. The thickness of zirconia shell can be readily controlled by altering molar ratio of Fe nanoparticle core to zirconia precursor in the first case where as reaction time was found to be most effective parameter to controlled the shell thickness in the second method. The structure and magnetic properties of the ZrO2-coated Fe nanoparticles were studied. TEM and HRTEM images show a typical core/shell structure in which spherical α-iron crystal sized of ~25 nm is surrounded by amorphous ZrO2 coating layer. TGA study showed an evidence of weight loss of less than 2% over the temperature range of 50-500 °C. The nanoparticles are basically in ferromagnetic state and their magnetic properties depend strongly on annealing temperature. The thermal treatment carried out in as-prepared sample resulted in reduction of coercivity and an increase in saturation magnetization. X-ray diffraction experiments on the samples after annealing at 400-600 °C indicate that the size of the Fe@ZrO2 particles is increased slightly with increasing annealing temperature, indicating the ZrO2 coating layer is effective to interrupt growing of iron particle according to heat treatment.

• 한국주조공학회지
• /
• 제7권1호
• /
• pp.53-59
• /
• 1987

In order to study the infuence of Sb addition on the compacted vermicular graphite cast iron(C/V) and gray cast iron(GC), these specimen which had different Sb content(0-0, 1wt.%) were prepared. these specimen were tested for microstructure and mechanical properties. The result from this study are as follows. For C/V and GC, the microstructure of graphite appeared to be finer with increasing Sb content more than 0.06wt.% Ferrite disappeared from the matrix with addition of Sb more than 0.06wt.% in GC and more than 0.08wt.% in C/V. The size of the eutectic cell in GC was 4.5 to 7 times larger than that in C/V, but the decreasing tendancy of its size was more remarkable in GC than in C/V with increasing Sb content. The abrasion speed corresponding to the maximum amount of abrasion in the nabrasion test was found to be 1.37m/sec. GC sample weared 3.6 to 21 times faster than those of C/V did. the amount of abrasion demeased remarkably with Sb addition, and the abrasion rate was constant with Sb content over 0.04wt.%