• 한국안광학회지
• /
• 제11권3호
• /
• pp.225-229
• /
• 2006

강자성체인 철과 니켈의 박막에서 전류와 자기장이 이루는 각도의 변화에 따른 자기저항의 변화를 관찰하였다. 경사각에 따른 PMR과 NMR의 크기가 같은 ${\phi}_{mix}$의 변화는 전류에 수직한 자기장의 성분과 평행한 자기장의 성분이 같게 되는 각도에서 자기저항 루프의 역전이 되는 것을 이용하면 ${\phi}_{mix}=tan^{-1}(1+tan{\theta})$와 같이 구해진다. 위 관계식은 실험치와 잘 일치함을 보여준다. 반면에 철박막의 경우에는 니켈박막과 자화축이 다르게 나타나서 ${\phi}_{mix}$가 위 식으로 주어진 관계와 일치하지 않는다.

• 대한지역사회영양학회지
• /
• 제4권3호
• /
• pp.412-420
• /
• 1999

The amount and type of dietary protein that effects affect bone mineral loss after menopause and different dietary patterns may influence anthropometric measurements, biochemical values, and bone metabolism. Objective : Our objective was to investigate bone metabolism and chronic disease factors in two different dietary patterns. Design: The sample consisted of 40 lacto-ove-vegetarians(LOV) and 49 omnivores aged from 47 to 85 years in good condition without any medical problems. Results : The average energy intake of LOV was 1414.0kcal and omnivores, 1403.2kcal. The difference between means was not statistically significant. The differences of means of body weight and BMI between the two groups were not significant but the systolic blood pressure of LOV group was significantly lower than omniovores(p<0.05). The values of serum cholesterol(p<0.05) and glucose(p<0.05) of LOV were signifcantly lower than that of omnivores. The serum albumin level(p<0.01) of LOV was lower than it'scounterpart but in a normal range. The intake of crude fiber(p<0.05) of LOV group was significantly higher. The urinary pH of LOV was 7.4 and that of omnivores was 6.3(p<0.001). Plant calcium(p>0.05) and plant iron(p<0.001) had positive correlations with the uninary pH but animal protein(p>0.05) and animal iron(p>0.05) had negative correlations with the urinary pH. The level of urinary biochemical marker of bone resorption, deoxypyridinoline(DPD) of LOV was significantly lower than the other group(p>0.05). The T-scores of bone mineral density for the two sites in the two groups were not significantly different. Conclusions : The DPD level and urinary pH value of LOV were more desirable for the bone metabolism that the omnivores. The diet of LOV had lower risk factors of chronic diseases than the other group.

• 자원리싸이클링
• /
• 제20권5호
• /
• pp.34-39
• /
• 2011

금속급 실리콘(MG-Si)에 Ca을 첨가하여 Ar 분위기 중의 1500$^{\circ}C$ 에서 용융하고, 10$^{\circ}C$/min의 속도로 상온까지 응고하여 왕수로 침출하였다. 본 연구에서는 금속급 실리콘 중의 Fe와 P의 제거에 미치는 Ca 첨가의 영향과 산 침출 조건의 영향에 대하여 조사하였다. Ca 첨가에 의해 MG-Si의 결정립계에 CaSi$_2$상이 생성되고, CaSi$_2$상 내에 FeSi$_2$상이 석출된 것을 확인하였다. 이러한 CaSi$_2$상 등의 생성에 의해 600~850${\mu}m$ 크기의 MG-Si에서도 30% 이상의 왕수를 이용한 침출로 Fe의 97%, P의 66%까지 제거할 수 있었다.

• 열처리공학회지
• /
• 제19권1호
• /
• pp.30-36
• /
• 2006

Fretting fatigue behavior of SCM420 steel commonly used in the automotive industry for structural applications was investigated in this study. In addition, the effect of bridge pad on the fretting fatigue test was evaluated from different pad materials and following conclusions were drawn. Simple fatigue limit of SCM 420 steel was determined to be 350 MPa while this value was 225 MPa and 285.5 MPa with SCM420H and with SM45C pad, respectively. Reduction in fatigue limit was, thus found to be 35.7% and 17.9% with SCM 420H pad and SM45C pad, respectively. Results of fracture surface observation revealed that typical striation pattern of fatigue failure existed as well as dimpled and cleavage frature appearance was found in final fractured region. From the EDS compositional analysis, test sample and pad part all had high signals for oxygen and iron, suggesting that worn particles might be iron oxide, although exact chemical composition has to be confirmed. Considerable reduction in fatigue life was apparent in SCM 420 steel under fretting fatigue against simple fatigue. Such reduced fatigue life by fretting damage should be considered as an important factor not only in the viewpoint of repairing but also inevitably in the design stage of structural components.

• Nutrition Research and Practice
• /
• 제7권2호
• /
• pp.82-88
• /
• 2013

Eleven types of nuts and seeds were analyzed to determine their energy (326-733 mg), moisture (1.6-18.3 mg), carbohydrate (8.8-70.9 mg), protein (4.9-30.5 mg), lipid (2.5-69.8 mg), and ash (1.2-5.5 mg) contents per 100 g of sample. Energy content was highest in pine nuts (733 mg/100 g), carbohydrate level was highest in dried figs (70.9 mg/100 g) and protein was highest in peanuts (30.5 mg/100 g). The amino acid compositions of nuts and seeds were characterized by the dominance of hydrophobic (range = 1,348.6-10,284.6 mg), hydrophilic (range = 341.1-3,244.3 mg), acidic (range = 956.1-8,426.5 mg), and basic (range = 408.6-4,738.5 mg) amino acids. Monounsaturated fatty acids (MUFA) were highest in macadamia nuts (81.3%), whereas polyunsaturated fatty acids (PUFA) were highest in the walnuts (76.7%). Macadamia nuts did not contain any vitamin E, whereas sunflower seeds contained the highest level (60.3 mg/kg). Iron (Fe) content was highest in pumpkin seeds ($95.85{\pm}33.01$ ppm), zinc (Zn) content was highest in pistachios ($67.24{\pm}30.25$ ppm), copper (Cu) content was greatest in walnuts ($25.45{\pm}21.51$ ppm), and lead (Pb) content was greatest in wheat nuts ($25.49{\pm}4.64$ ppm), significantly (P < 0.05). In conclusion, current commercial nuts and seeds have no safety concerns, although further analysis of Pb contents is necessary to ensure safety.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.266-269
• /
• 2009

Iron-based soft magnetic materials are widely used as cores, such as transformer transformers, motors, and generators. Reducing losses generated from soft magnetic materials of these applications results in improving energy conversion efficiency. Recently, the new P/M soft magnetic material realized an energy loss of 68 W/kg with a drive magnetic flux of 1 T, at a frequency of 1 kHz, rivaling general-purpose electromagnetic steel sheet in the low frequency range of 200 Hz to 1 kHz. In this research, the effect of rolling parameters on soft magnetic properties of Fe-based powder cores was investigated. The Fe-based soft magnetic plates were produced by the hot powder rolling process after both pure Fe and Fe-4%Si powders were canned, evacuated, and sealed in Cu can. The soft magnetic properties such as energy loss and coercive power were measured by B-H curve analyzer. The soft magnetic properties of rolled sheets were measured under conditions of a magnetic flux density of 1 T at a frequency of 200 kHz. It was found that rolling reduction ratio is the most effective parameter on reducing both energy loss and coercivity because of increasing aspect ratio with reduction ratio. By increasing aspect ratio from 1 to 9 through hot rolling of pure Fe powder, a significant loss reduction of one-third that of SPS sample was achieved.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.362-367
• /
• 2012

Magnetite nanoparticles(NPs) have been the subject of much interest by researchers owing to their potential use as magnetic carriers in drug targeting and as a tumor treatment in cases of hyperthermia. However, magnetite nanoparticles with 10 nm in diameter easily aggregate and thus create large secondary particles. To disperse magnetite nanoparticles, this study proposes the infiltration of magnetite nanoparticles into hybrid silica aerogels. The feasible dispersion of magnetite is necessary to target tumor cells and to treat hyperthermia. Magnetite NPs have been synthesized by coprecipitation, hydrothermal and thermal decomposition methods. In particular, monodisperse magnetite NPs are known to be produced by the thermal decomposition of iron oleate. In this study, we thermally decomposed iron acetylacetonate in the presence of oleic acid, oleylamine and 1,2 hexadecanediol. We also attempted to disperse magnetite NPs within a mesoporous aerogels. Methyltriethoxysilicate(MTEOS)-based hybrid silica aerogels were synthesized by a supercritical drying method. To incorporate the magnetite nanoparticles into the hybrid aerogels, we devised two methods: adding the synthesized aerogel into a magnetite precursor solution followed by nucleation and crystal growth within the pores of the aerogels, and the infiltration of magnetite nanoparticles synthesized beforehand into aerogel matrices by immersing the aerogels in a magnetite nanoparticle colloid solution. An analysis using a vibrating sample magnetometer showed that approximately 20% of the magnetite nanoparticles were well dispersed in the aerogels. The composite samples showed that heating under an inductive magnetic field to a temperature of $45^{\circ}C$ is possible.

• 천문학회지
• /
• 제55권2호
• /
• pp.23-36
• /
• 2022

We present a method to determine nitrogen abundance ratios with respect to iron ([N/Fe]) from molecular CN-band features observed in low-resolution (R ~ 2000) stellar spectra obtained by the Sloan Digital Sky Survey (SDSS) and the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST). Various tests are carried out to check the systematic and random errors of our technique, and the impact of signal-to-noise (S/N) ratios of stellar spectra on the determined [N/Fe]. We find that the uncertainty of our derived [N/Fe] is less than 0.3 dex for S/N ratios larger than 10 in the ranges T_eff = [4000, 6000] K, log g = [0.0, 3.5], [Fe/H] = [-3.0, 0.0], [C/Fe] = [-1.0, +4.5], and [N/Fe] = [-1.0, +4.5], the parameter space that we are interested in to identify N-enhanced stars in the Galactic halo. A star-by-star comparison with a sample of stars with [N/Fe] estimates available from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) also suggests a similar level of uncertainty in our measured [N/Fe], after removing its systematic error. Based on these results, we conclude that our method is able to reproduce [N/Fe] from low-resolution spectroscopic data, with an uncertainty sufficiently small to discover N-rich stars that presumably originated from disrupted Galactic globular clusters.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.173-173
• /
• 2000

Multilayered films (MLF) consisting of transition metals and semiconductors have drawn a great deal of interest because of their unique properties and potential technological applications. Fe/Si MLF are a particular topic of research due to their interesting antiferromagnetic coupling behavior. although a number of experimental works have been done to understand the mechanism of the interlayer coupling in this system, the results are controversial and it is not yet well understood how the formation of an iron silicide in the spacer layers affects the coupling. The interpretation of the coupling data had been hampered by the lack of knowledge about the intermixed iron silicide layer which has been variously hypothesized to be a metallic compound in the B2 structure or a semiconductor in the more complex B20 structure. It is well known that both magneto-optical (MO0 and optical properties of a metal depend strongly on their electronic structure that is also correlated with the atomic and chemical ordering. In order to understand the structure and physical properties of the interfacial regions, Fe/Si multilayers with very thin sublayers were investigated by the MO and optical spectroscopies. The Fe/si MLF were prepared by rf-sputtering onto glass substrates at room temperature with a totall thickness of about 100nm. The thicknesses of Fe and Si sublayers were varied from 0.3 to 0.8 nm. In order to understand the fully intermixed state, the MLF were also annealed at various temperatures. The structure and magnetic properties of Fe/Si MLF were investigated by x-ray diffraction and vibrating sample magnertometer, respectively. The MO and optical properties were measured at toom temperature in the 1.0-4.7 eV energy range. The results were analyzed in connection with the MO and optical properties of bulk and thin-film silicides with various structures and stoichiometries.

• Advances in nano research
• /
• 제12권6호
• /
• pp.605-616
• /
• 2022

We prepared two samples of ultrafine ferrihydrite (FH) nanoparticle ensembles of quite a different origin. First is the biosynthesized sample (as a product of the vital activity of bacteria Klebsiella oxytoca (hereinafter marked as FH-bact) with a natural organic coating and negligible magnetic interparticle interactions. And the second one is the chemically synthesized ferrihydrite (hereinafter FH-chem) without any coating and high level of the interparticle interactions. The interparticle magnetic interactions have been tuned by modifying the nanoparticle surface in both samples. The coating of the FH-bact sample has been partially removed by annealing at 150℃ for 24 h (hereinafter FH-annealed). The FH-chem sample, vice versa, has been coated (1.0 g) with biocompatible polysaccharide (arabinogalactan) in an ultrasonic bath for 10 min (hereinafter FH-coated). The changes in the surface properties of nanoparticles have been controlled by XPS. According to the electron microscopy data, the modification of the nanoparticle surface does not drastically change the particle shape and size. A change in the average nanoparticle size in sample FH-annealed to 3.3 nm relative to the value in the other samples (2.6 nm) has only been observed. The estimated particle coating thickness is about 0.2-0.3 nm for samples FH-bact and FH-coated and 0.1 nm for sample FH-annealed. Mössbauer and magnetization measurements are definitely shown that the drastic change in the blocking temperature is caused by the interparticle interactions. The experimental temperature dependences of the hyperfine field hf>(T) for samples FH-bact and FH-coated have not revealed the effect of interparticle interactions. Otherwise, the interparticle interaction energy E_int estimated from the hf>(T) for samples FH-chem and FH-annealed has been found to be 121k_B and 259k_B, respectively.