• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.640-645
• /
• 2018

The design of non-precious electrocatalysts with low-cost, good stability, and an improved oxygen reduction reaction(ORR) to replace the platinium-based electrocatalyst is significant for application of fuel cells and metal-air batteries with high energy density. In this study, we synthesize iron-carbide($Fe_3C$) embedded nitrogen(N) doped carbon nanofiber(CNF) as electrocatalysts for ORRs using electrospinning, precursor deposition, and carbonization. To optimize electrochemical performance, we study the three stages according to different amounts of iron precursor. Among them, $Fe_3C$-embedded N doped CNF-1 exhibits the most improved electrochemical performance with a high onset potential of -0.18 V, a high $E_{1/2}$ of -0.29 V, and a nearly four-electron pathway (n = 3.77). In addition, $Fe_3C$-embedded N doped CNF-1 displays exellent long-term stabillity with the lowest ${\Delta}E_{1/2}=8mV$ compared to the other electrocatalysts. The improved electrochemical properties are attributed to synergestic effect of N-doping and well-dispersed iron carbide embedded in CNF. Consequently, $Fe_3C$-embedded N doped CNF is a promising candidate for non-precious electrocatalysts for high-performance ORRs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.190-195
• /
• 2009

Thin-gauged 3% silicon steel sheets having a highly grain-oriented texture have been developed as a core material for applications of middle-frequency (400 Hz ${\sim}$ 10 kHz) devices. The newly developed sheets with a tension coating showed an excellent reduction in iron loss at 400 Hz (iron loss at 1.0 T and 400 Hz = 4.677 W/kg, iron loss at 1.5 T and 400 Hz = 9.742 W/kg) due to high magnetic induction, $B_{10}$(measured induction at 1000 A/m), of over 1.9 T. In cases of frequencies below 400 Hz, magnetic induction, $B_{10}$, of the sample plays a major role to reduce its iron loss as excitation induction increases, whereas, in case of frequency of 1 kHz, thickness dependence becomes dominant due to a lower iron loss at relatively thinner sample. The sheets with a high magnetic induction, therefore, are favorable for high excitation induction (over 1.0 T) and low excitation frequency (below 400 Hz) applications, whereas the sheets that can reduce eddy current loss by reducing thickness or domain wall width are advantageous for low excitation induction (below 1.0 T) and high excitation frequency (around 1 kHz) applications.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.221-229
• /
• 1999

We examined the governing factors of fatigue limit in annealed and austempered ductile iron specimens machined micro hole(dia.<0.4mm) in rotary bending fatigue test. Also, the quantitative relationship between fatigue limit and maximum defect size in specimens was investigated. Artificial defect(micro-pit type, dia.<0.4mm) on specimen surface did not bring about an obvious reduction of fatigue limit in austempered ductile iton(ADI) as compared with annealed ductile iron. According to the investigation of ${\sqrt{area}}_c$ which is the critical defect size to crack initiation at artificial defect, ${\sqrt{area}}_c$ of ADI was larger than that of annealed ductile iron. This shows that the situation of crack initiation at artificial defect in ADI is more difficult in comparison with annealed ductile iron. Maximum defect size is one of the important parameters to predict fatigue limit. And, the quantitative relationship, between the fatigue limit ${\sigma}_{\omega}$ and the maximum defect size ${\sqrt{area}}_{max}$ can be expressed to ${\sigma}_{\omega}^n{\cdot}{\sqrt{area}}_{max}=C_2$ where, $C_2$ are constant. Moreover, it is possible to explain the difference in fatigue limit between, austempered and annealed ductile iron by introducing the parameter ${\delta}(=N_{sg}/N_{total})$in a plain spectimen.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.33-50
• /
• 2006

Around Yeongsan river basin, there are Yeongkwang Gundong, Muan Inpyeong Tombs, Muu Gusan-ri Tombs and Hampyeong Guksan remain from which a lot of iron artifacts were excavated. Among them, 6 iron artifacts were chosen, and their microstructures were analyzed. As a result, Iron artifacts were produced sponge iron by the low temperature reduction process and a part of microstructure have the possibility that steel made by decarburizing. And also, by tempering the parts which need high strength, the iron artifacts had high strength and by distributing the weakness of the tempered structure to the nearby untempered parts, their breaking was prevented and they had the durability. These skills were used then. Especially these skills were found to be used in the 2nd century by high skilled people because an iron axe excavated at Yeongkwang Gundong of 2nd century by the historical record showed that the skill was used. Also microstructures were found to show the possibility that the iron technology was inherited to the late 5th century. When producing iron artifacts made of sponge iron containing small amount of carbon, that was made by the production process repeating molding, carburizing, heat treatment and hammering.

• Korean Journal of Community Nutrition
• /
• v.11 no.6
• /
• pp.808-813
• /
• 2006

Until now, South Korea does not have either fortification or enrichment program as intervention tools although the addition of micronutrients to foods is for the most part not regulated. The aim of this study was to determine which scenario would most effectively reduce the proportion of the population with low iron intake while not putting other population groups at risk of excessive intakes. In order to investigate potential dietary consequences of iron fortification we analyzed 2 day dietary record data (n=3,955) from the 2001 National Nutrition Surveys. The Proportion of the population consuming dietary iron less than the estimated average requirement (EAR) ranged from $12.4{\sim}87.5%$ depending upon gender and age group. Iron fortification at the level of 100% of Recommended Intake (RI) per 100g to breads and instant o. dried noodles was estimated to result in a 15% decrease of proportion of those with iron less than EAR, while putting 1.4 % of the population greater than the Upper Limit (UL). Iron fortification appeared to be the most effective for the $15{\sim}19$ year old age group, showing 39% reduction of iron intake insufficiency. The results suggest that carefully designed fortification or enrichment to staple foods may contribute to increase dietary iron intakes of Koreans, especially for the young population with a high prevalence of iron inadequacy. As the estimation in this study was based solely upon dietary intake data, iron intake from supplements should be considered in further studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6187-6195
• /
• 2012

Recycling process of iron should be developed for efficient recovery of neodymium(Nd), rare metal, from acid-leaching solution of neodymium magnet. In this study, $FeCl_3$ solution as iron source was used for synthesis of iron nanoparticle with the condition of various factors, etc, reductant, surfactant. $Na_4O_7P_2$ and polyvinylpyrrolidone(PVP) as surfactants, $NaBH_4$ as reductant, and palladium chloride($PdCl_2$) as a nucleation seed were used. Iron powder was analyzed with instruments of XRD, SEM and PSA for measuring shape and size. Iron nanoparticles were made at the ratio of 1 : 5(Fe (III) : $NaBH_4$) after 30 min of reduction time. Size and shape of iron particles synthesized were round-form and 50 nm ~ 100 nm size. Zeta-potential of iron at the 100 mg/L of $Na_4O_7P_2$ was negative value, which is good for dispersion of metal particle. When $Na_4O_7P_2$(100 mg/L), PVP($FeCl_3$ : PVP = 1 : 4, w/w) and Pd($FeCl_3$ : $PdCl_2$ = 1 : 0.001, w/w) were used, iron nanoparticles which are round-shape, well-dispersed, near 100 nm-sized can be made.

• 한국전기화학회:학술대회논문집
• /
• 2002.07a
• /
• pp.135-138
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.34-34
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.795-797
• /
• 1998

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.151-157
• /
• 2005

A one-dimensional numerical model was developed to simulate vertical profiles of electron acceptors and their reduced species in benthic sediments. The model accounted for microbial degradation of organic matter and subsequent chemical reactions of interest using stoichiometric relationships. Depending on the dominant electron acceptors utilized by microorganisms, the benthic sediments were assumed to be vertically subdivided into six zones: (1) aerobic respiration, (2) denitrification, (3) manganese reduction, (4) iron reduction, (5) sulfate reduction, and (6) methanogenesis. The utilizations of electron acceptors in the biologically mediated oxidation of organic matter were represented by Monod-type expression. The mass balance equations formulated for the reactive transport of organic matter, electron acceptors, and their corresponding reduced species in the sediments were solved utilizing an iterative multistep numerical method. The ability of model to simulate a freshwater sediments system was tested by comparing simulation results against published data obtained from lake sediments. The simulation results reasonably agreed with field measurements for most species, except for ammonia. This result showed that the C/N ratio (106/16) in the sediments is lower than what the Redfield formula prescribes. Since accurate estimates of vertical profiles of electron acceptors and their reduced species are important to determine the mobility and bioavailability of trace metals in the sediments, the model has potential application to assess the stability of selected trace metals in the sediments.