• Advances in materials Research
• /
• v.8 no.1
• /
• pp.11-24
• /
• 2019

This paper presents a review study for energy-efficient gas turbines (GTs) with cycles which contributes significantly towards sustainable usage. Nonetheless, these progressive engines, operative at turbine inlet temperatures as high as $1600^{\circ}C$, require the employment of highly creep resistant materials for use in hotter section components of gas turbines like combustion chamber and blades. However, the gas turbine obtain its driving power by utilizing the energy of treated gases and air which is at piercing temperature and pushing by expanding through the several rings of steady and vibratory blades. Since the turbine blades works at very high temperature and pressure, high stress concentration are observed on the blades. With the increasing demand of service, to provide adequate efficiency and power within the optimized level, turbine blades are to be made of those materials which can withstand high thermal and working load condition for longer cycle time. This paper depicts the recent developments in the field of implementing the best suited materials for the GTs, selection of proper Thermal Barrier Coating (TBC), fracture analysis and experiments on failed or used turbine blades and several other designing and operating factors which are effecting the blade life and efficiency. It is revealed that Nickel based Superalloys were promising, Cast Iron with Zirconium and Pt-Al coatings are used as best TBC material, material defects are the foremost and prominent reason for blade failure.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.60-66
• /
• 1998

The hot stove system is a process that is continuously and constantly generating the hot combustion air required for the blast furnace. The hot stove process is considered as a main energy consumption process because it consumes about $20\%$ of the total energy in steel making works. So, many researchers have interested in the improvement of the heat efficiency of the hot stove to reduce the energy consumption. But they have difficulties in improving the heat efficiency of the hot stove because there is no precise information on heat transformation occurring during the heating period. In order to model the relationship between the operating conditions and heat efficiencies, we propose a neural network using feature extraction as one of experimental modeling methods. In order to show the performance of the model, we compare it with Partial Least Square (PLS) method. Both methods have similarities in using the dimension reduction technique. And then we present the simulation results on the prediction of the heat efficiency of the hot stove.

• Archives of design research
• /
• v.14 no.3
• /
• pp.197-210
• /
• 2001

There are symbolicity and special meaning in the materials which are supposed to be used metalcraft from ancient to present. These are basical resources of hermeneutics and play a role as moaning elements. Generally, the precious Cold and Silver are mainly to be used with precious stone. But recently, ordinary materials like glass iron aluminum has begun to be used with them. Several artists are intentionally using them, and special skills which could be revealed by only the matherials are developing by them. In these skill, there are original material's texture and character of matter are looking like other matter. Well, special skills are adapted in these matters to magnify the possibility of expression, the originally codified meaning resources are disturbed. For example, The metal craft artist June Schwarcz is using the skills of electroforming, copper foiling, enameling, wire brush patina, fine wires fusing, etc. He is doing abstract forming and making various textures. And his works are very big size, and done by the skills of painting and sculpture. The outer form is very structural, special touches of the artists are heterogeneously mixed with the symbolic abstract expressionism color field. Further, there are mixed with Primitive original life atmosphere, Medieval ornamental aspect, Minimal, and Chaotic aspects. The meaning particles of these aspects are directly/indirectly joined but special skills and basic material languages are mixed together, the originally codified material language are disturbed. These disturbed material languages are becoming optically special effect and be illusion. It is making expressing way of tile metalcraft more fertile and be infinite.

• Journal of Energy Engineering
• /
• v.12 no.3
• /
• pp.223-230
• /
• 2003

A study was performed to measure and analyze the gas-side fouling of heat exchanger to cool the exhaust gas from sludge incinerator at ironworks. The incinerator gas passes through inside of the vertical tubes of heat exchanger to preheat the combustion air. This kind of fouling occurs at the entrance region of the heat exchanger and thus the perforated fouling plate was designed to measure the gas-side fouling and to analyze the particulate deposit. As a result of analysis, the particulate deposition rate was influenced by temperature, particulate composition and size and also the deposition patterns were different according to the location of perforated fouling plate. The computational analysis was performed to obtain the deposition rates at the perforated fouling plate and the calculation showed that the deposition rate was varied with the hole size and particulate size. It was proved that the fouling at the entrance region of heat exchanger could be measured by the perforated fouling plate designed in this study.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.1
• /
• pp.81-86
• /
• 2003

For the simultaneous removal of $SO_2$/NOx from an iron-ore sintering plant, industrial plasma experiments have been conducted with a flue gas flow rate of $5,000Nm^3/hr$. The maximum 40kW power using the magnetic pulse compression (MPC) system generates a peak value of 100-150kV pulse voltage with its risetime of 200nsec and full width at half maximum (FWHM) of 500nsec, and with a frequency <300Hz. The plasma reactor module adopts a wire-plate structure with a gap of 200-400mm ID between plates. Initial concentrations of $SO_2$ and NOx were around 100-150ppm, respectively in the presence of 15% $O_2$ and <10% $H_2O$. Various reaction parameters such as specific energy ($Whr/Nm^3$), $NH_3$ injection with corona discharge, flow rate and injection of hydrocarbons were investigated for $SO_2$/NOx removal characteristics. About 90/65% of $SO_2$/NOx were simultaneously removed with a specific energy of $3.0Whr/Nm^3$ when both $NH_3$ and hydrocarbons were injected. Practical implications that the pilot-scale plasma results provide are further discussed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.9-16
• /
• 2001

Chromium exposure can be in the forms of environmental pollution and occupational exposure. The harmful effects of chromium on the body greatly differ depending on its valence or solubility. Accordingly, the recommended permissible exposure limit for each chromium compound is different. This study investigated the increase or decrease of distribution and excretion of total chromium exposed simultaneously the soluble Cr+6 and Cr+3 compounds. There were no difference of total chromium concentration in plasma, red bloods cells, urine, organs between simultaneously injected and individually injected soluble Cr+6 and Cr+3 compound. The chromium clearances in urine also showed that there were two phases in the two groups. In the first phase, biological half lives of the total chromium of the two groups have been similar within 24 hr., but in the second phase, biological half life of the group injected simultaneously was 62.7 hr. and was less than that of the other group's 188.3 hr. The average concentration of total chromium in plasma was same with the control, and that of RBCs was $0.218nmol/m{\ell}$ and was slightly increased in comparison with $0.121nmol/m{\ell}$ of the control, which was not statistically significant. As a result, there were no differences of distribution and excretion of chromium between the group exposed simultaneously and the other group exposed separately the soluble Cr+6 and Cr+3 compounds. The biological half life of chromium of the former group in urine was less than that of the other group.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.119-129
• /
• 1991

$\gamma$-FeOOH suitable for magnetic recording media was synthesized using waste acid which is the by-product of the iron works factory. Effects of concentration of the acid and alkali and reaction temperature on the particle properties of $\gamma$-FeOOH and magnetic properties of $\gamma$-$Fe_2O_3$ were studied. $\gamma$-FeOOH single phase was formed below 1M of acid concentration with 1M of alkali concentration and at 0.4M of acid concentration with 4M of alkali concentration. While the width of acicular particle was increased, the length of acicular particle was decreased with diluting acid concentration. The magnetic properties of the $\gamma$-$Fe_2O_3$ improved with increasing acid concentration. $\gamma$-FeOOH single phase was formed in the temperature range of 30 to $80^{\circ}C$. The length of the particle was decreased with increasing temperature. $\gamma$-Fe2O3 produced from dehydration of $\gamma$-FeOOH showed bad magnetic properties due to the presence of many pores in the particle. But with successive reduction and oxidation of $\gamma$-$Fe_2O_3$ produced from dehydration of $\gamma$-FeOOH, $\gamma$-$Fe_2O_3$ showed good magnetic properties.

• Journal of the Korean Society of Costume
• /
• v.29
• /
• pp.23-38
• /
• 1996

The purpose of this study was to analyze the characteristics of the Minimal Art represented in the second half 20th century fashion. All the mode of dress worn this century have developed from the stimulus of a chang-ing society fired by new discoveries and a zest for the new and different. It would appear that even more dramatic changes will soon occur in our clothing styles the effects of which will be farreaching. Many of today's styles intended to dress our psyche rather than our bodies and this if fully understood by the new designers whose influ-ence will become increasingly more potent as we approach the new century. The highly developed material civilization resulted in human alienations environmental distruption, l By this fact human being of the 20th century was to overcome social com-plexity. Accordingly their search for simplicity was interested in the 60's style. Especially the formativeness of the 60s style was repre-sented in the second half 20th century fashion. In this paper it was focused that how the characteristics of the Minimal Art was expressed in the second half 20th century fashion. minimalism was a quest for basic elements repesenting the fundamental esthetic values of art. without regard to issues of content. At its most extreme it reduced art not ot an eter-nal essence but to an arid simplicity. "Primary Structure" the most suitable name suggested for this type conveys its two salient characteristics : extreme simplicity of shapes and a kinship with architecture. minimalist works are charcterized by huge dimensions coldness and absolute aesthetic neutrality. minimalist artists ambition is to de-fine through the most rudimentary materials such as plywood galvanized iron aluminum plastic and wood a new order of the space. The environment is just as important as the object itself. Similary the use of new tough materials. such as vinyl metal and plastic at late half of the 20th century fashion related to the formativeness of the Minimal Art. And the style of 20th fashion was holded the internal meanings in common the formativeness of the Minimal Aet thorough the various texture pat-tern silhouette etc.uette etc.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.401-409
• /
• 2009

The results of particulate matters level and heavy metal concentration, which surveyed in Gwang-Yang, Dang-Jin steel industry area, are as follows; The $PM_{2.5}$, $PM_{10}$ of exposure area are $22.3{\mu}g/m^3$, $40.4{\mu}g/m^3$ each in Kum-Ho dong, and $28.1{\mu}g/m^3$, 51.5 each in Jung dong. The $PM_{2.5}$, $PM_{10}$ of control area are $16.4{\mu}g/m^3$, $29.5{\mu}g/m^3$ each in Bonggang-myeon. The level is higher in exposure area than control area. In case of Dang Jin, the concentration of $PM_{10}$ and $PM_{2.5}$ is higher in exposure area than control area ($PM_{2.5}-20.4{\mu}g/m^3$, $PM_{10}-39.2{\mu}g/m^3$). The Pb level of Dang Jin area is higher in exposure area ($0.13{\mu}g/m^3$) than control area ($0.1{\mu}g/m^3$) and both Gwang-Yang and Dang-Jin area lower level than the Guideline level of Korea EPA.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.151-159
• /
• 2016

The discussion was started from the question about how literary linguistic expressions are reproduced in the movies. This study focuses on the cinematized version of Jelinek's "Die Klavierspielerin", the by Michael Haneke. and looking for cinematization of literary works and these aesthetic values. The original delicately describes the life of Erika who has been living under the supervision and control by her mother. The topic of the is the conflict between the controlling mother and the desires of the heroin Erika who has been living under the suppression. The world of suppression symbolized by her mother is described as closed and dark space while the world of Erika and her desires, represented by Walter is described as open and bright space. The life of Erika living under control symbolized by prison-like double doors, iron-barred window, darkness and shadow is abnormally distorted. Even the piano that must be the center of her life as a pianist is also one of the symbols of dark world of suppression.