• 방사성폐기물학회지
• /
• 제18권3호
• /
• pp.363-372
• /
• 2020

Anionic radionuclides pose one of the highest risks to the long-term safety assessments of disposal repositories. Therefore, techniques to immobilize and separate such anionic radionuclides are of crucial importance from the viewpoints of safety and waste volume reduction. The main objective of this study is to design a separator with minimum pressure disturbance, based on the concept of a conventional cyclone separator. We hypothesize that the anionic radionuclides can be immobilized onto a nanomaterial-based substrate and that the particles generated in the process can flow via water. These particles are denser than water; hence, they can be trapped within the cyclone-type separator because of its design. We conducted particle tracking analysis using computational fluid dynamics (CFD) for the conventional cyclone separator and studied the effects due to the morphology of the separator. The proposed sandglass-like design of the separator shows promising results (i.e., only one out of 10,000 particles escaped to the outlet from the separation zone). To validate the design, we manufactured a laboratory-scale prototype separator and tested it for iron particles; the efficiency was ca. 99%. Furthermore, using an additional magnetic effect with the separator, we could effectively separate particles with ~100% efficiency. The proposed sandglass-like separator can thus be used for effective separation and recovery of immobilized anionic radionuclides.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1832-1835
• /
• 2003

This paper suggests the selective ultra precision polishing techniques for micro die and mold parts using magnetic-assisted machining. Fabrication of magnetic abrasive particle and their polishing performance are key technology at ultra precision polishing process of micro parts. Conventional magnetic abrasives have disadvantages. which are missing of abrasive particle and inequality between magnetic particle and abrasive particle. So, bonded magnetic abrasive particles are fabricated by several method. For example, plasma melting and direct bonding. Ferrite and carbonyl iron powder are used as magnetic particle where silicon carbide and Al$_2$O$_3$ are abrasive particle. Developed particles are analyzed using measurement device such as SEM. Possibility of magnetic abrasive and polishing performance of this magnetic abrasive particles also have been investigated. After polishing, surface roughness of workpiece is reduced from 2.927 $\mu\textrm{m}$ Rmax to 0.453 $\mu\textrm{m}$ Rmax.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.59-66
• /
• 2003

This study suggests the new ultraprecision finishing techniques for micro die and mold parts using magnetic field-assisted polishing. Conventional magnetic abrasives have several disadvantages, which are missing of abrasive particle and inequal mixture between magnetic particle and abrasive particle. Therefore, bonded magnetic abrasive particles are fabricated by several method. For example, plasma melting and direct bonding. Carbonyl iron powder is used as magnetic particle there silicon carbide and alumina are abrasive particles. Developed magnetic abrasives are analyzed using SEM. Feasibility of magnetic abrasive and polishing performance of this magnetic abrasive particles also have been investigated. After polishing, surface roughness of workpiece is reduced from 85.4 ㎚ Ra to 9 ㎚ RA.

• 한국응용과학기술학회지
• /
• 제15권3호
• /
• pp.55-60
• /
• 1998

The sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers, which are oligomer type surfactants were prepared by polymerization with fatty acid vinyl acetate. The ${\alpha}-sulfonation$ of fatty acid vinyl ester oligomers were carried by direct addition of sulfur trioxide. The dispersing performance of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS) in the aqueous suspension of iron oxide and titanium dioxide particles was evaluated by particle size distribution and zeta-potential measurement. As results, the particles of iron oxide and titanium dioxide were flocculated by addition of small amount of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS), then the flocks redispersed by more addition of oligomer type anionic surfactants and SDS. The flocculation, redispersion process was observed in lower concentration range of oligomer type anionic surfactants than SDS. Especially, the dispersing action of sodium ${\alpha}-sulfo$ palmitic acid vinyl ester oligomer was better than sodium ${\alpha}-sulfo$ lauric acid vinyl ester oligomer.

• 자원리싸이클링
• /
• 제7권2호
• /
• pp.23-30
• /
• 1998

제철소의 고로에서 발생하는 슬러지로부터 산화철 및 탄소분과 같은 유용 성분을 회수하여 리싸이클링하기 위하여 슬러지의 물리화학적 특성과 습식 사이클론을 이용한 분급특성을 조사형T다. 슬러지 입자의 크기에 따른 성분의 부존 상태를 조사한 결과, 탄소는 graphite 상으로 주로 굵은 입자에, 아연은 zinc sulfide로서 주로 미세한 입자에 분포하였다. 그러나 슬러지 중에 hematite 및 magnetite 상으로 존재하는 철분은 입경에 따른 편석이 없었다. 내경 75mm인 습식 사이클론에서 적정한 조건으로 고로슬러지를 분급하면 저아연 슬러지의 회수율과 탈아연율이 각 67.9~73.6% 및 72.7~86.8% 수준에 도달하였다.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.117-124
• /
• 2018

For the effective removal of phosphorus in water, a novel type of composite was prepared by combining Poly Alumiun Chloride, widely used in sewage/wastewater treatment plants, and Humic Acid particles, which are known to have phosphorus removal ability, with CI. The surface of the ferromagnetic CI particles was oxidized and activated, and then PAC and HA were synthesized to finally produce CIPAC and CIHA. CIPAC and CIHA prepared by this study showed similar results to the phosphorus removal efficiencies of PAC and HA coagulants. The novel composite has a larger weight than the conventional coagulant, and the coagulated sludge precipitates rapidly. The sludge could be easily separated in a short time if the external magnetic field was given by the ferromagnetic force of CIPAC and CIHA prepared with CI as support. Therefore, it can be concluded that if phosphorus removal is carried out using CIPAC and CIHA prepared through this study with external magnetic field, the sedimentation rate will be much faster than that of conventional coagulant. Thus it is possible to obtain a high economic benefit in the sludge recovery part.

• 생명과학회지
• /
• 제21권3호
• /
• pp.444-450
• /
• 2011

퍼클로레이트($ClO_4^-$)는 지표수 및 토양/지하수에서 검출되는 오염물이다. 독립영양방식의 퍼클로레이트-환원세균(PRB)은 기체 수소(H2)를 전자공여체로 사용하여 $ClO_4^-$를 제거한다. 철이 부식되면 $H_2$를 생성할 수 있음에 착안하여 본 연구에서는 하수처리장에서 쉽게 구할 수 있는 활성슬러지를 식종하여 영가철(ZVI)을 이용한 독립 영양방식의 $ClO_4^-$ 제거 가능성을 조사하였다. 회분반응실험을 통해 활성슬러지미생물이 ZVI가 존재할 때 $ClO_4^-$를 분해할 수 있음을 알 수 있었으며, 또한 이러한 $ClO_4^-$의 생분해는 $ClO_4^-$가 분해됨에 따라 생성되는 $Cl^-$의 몰 농도를 통해 확인 할 수 있었다. 독립영양방식의 $ClO_4^-$ 제거공정에 사용된 철 입자의 표면에 간균형태의 미생물들이 존재한다는 것을 주사전자현미경을 통해 관찰하였다. 그래서 철 입자가 생물막을 형성하기 위한 담체로서도 작용할 수 있다는 것을 알 수 있었다. ZVI가 첨가된 $ClO_4^-$ 분해성 농화배양으로부터 채취한 생물막의 미생물군집조성은 접종균으로 사용된 활성슬러지의 그것과는 다름이 DGGE 분석 결과 나타났다. DGGE band 중에서 생물막의 주요밴드는 Clostridia 강과 가장 관련이 있는 것으로 나타났다.

• 한국결정성장학회지
• /
• 제14권3호
• /
• pp.101-104
• /
• 2004

결정내부에 존재하는 인클루전의 구성성분 및 결정학적인 구조를 분석하기 위해서는 기존의 normal XRD 분석 장비에 비해, 수십 $\mu\textrm{m}$ 크기의 결정입자에 대해 X-선 빔을 포커싱(focusing)하여 높은 S/N비로 분석할 수 있는 MC-XRD(Multi-Channel Ray Diffractome)가 매우 유용하였다. 이러한 MC-XRD로 분석한 결과, 루틸로 알려져 있는 커런덤내에 함유된 침상내포물은 iron titanium oxide, iron oxide들로 이루어져 있었고, 각각은 $Fe_2TiO_4,\; Fe_2TiO_5,\; Fe_2O_3$와 같은 화학조성을 가짐을 알았다.

• Clinical and Experimental Pediatrics
• /
• 제53권5호
• /
• pp.661-665
• /
• 2010

Anemia caused by vitamin B12 deficiency resulting from inadequate dietary intake is rare in children in the modern era because of improvements in nutritional status. However, such anemia can be caused by decreased ingestion or impaired absorption and/or utilization of vitamin B12. We report the case of an 18-year-old man with short stature, prepubertal sexual maturation, exertional dyspnea, and severe anemia with a hemoglobin level of 3.3 g/dL. He had a history of small bowel resection from 50 cm below the Treitz ligament to 5 cm above the ileocecal valve necessitated by midgut volvulus in the neonatal period. Laboratory tests showed deficiencies of both vitamin B12 and iron. A bone marrow examination revealed dyserythropoiesis and low levels of hemosiderin particles, and a cytogenetic study disclosed a normal karyotype. After treatment with parenteral vitamin B12 and elemental iron, both anemia and growth showed gradual improvement. This is a rare case that presented with short stature and delayed puberty caused by nutritional deficiency anemia in Korea.