• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2109-2113
• /
• 2014

Solvent extraction of Fe(III) from chloride solution by using a mixture of D2EHPA (Di-(2-ethylhexyl)-phosphoric acid) and TBP (Tri-butyl phosphate) and the reductive stripping of Fe(III) from the loaded organic were investigated. Quantitative extraction of Fe(III) from the solution (Fe concentration = 90 g/L) was accomplished in two cross-current extraction stages by using the mixture of D2EHPA and TBP. In order to facilitate the stripping efficiency, a reductive stripping method was employed by using $H_2SO_3$ or $Na_2SO_3$ as a reducing agent. The addition of $H_2SO_4$ into reducing agents led to improvement in the stripping efficiency while high concentration acid would suppress it. Both of the mixtures of $H_2SO_4+H_2SO_3$ and $H_2SO_4+Na_2SO_3$ showed good efficiency for the stripping of Fe(III), while the latter was recommended as the stripping solution based on the economics and experimental condition.

• Parasites, Hosts and Diseases
• /
• v.49 no.2
• /
• pp.133-138
• /
• 2011

This study was undertaken to investigate the hematological and biochemical changes in experimentally infected goats with Besnoitia caprae from the time of infection till 360 days post-infection (PI). Six male goats were inoculated subcutaneously with $13{\times}10^7$ bradyzoites of B. caprae, and blood samples were collected from the jugular vein. The total erythrocyte and total leukocyte counts, hematocrit value, and differential leukocyte counts were determined. Serum biochemical analysis, including the total protein, albumin, total globulin, cholesterol, triglyceride, chloride, testosterone, calcium ($Ca^{2+}$), inorganic phosphorus, sodium ($Na^+$), potassium ($K^+$), iron ($Fe^{2+}$), glucose, serum amyloid A (SAA), haptoglobin (Hp), fibrinogen, ceruloplasmin, aspartate aminotransferase, alanine aminotransferase, creatine kinase, lactate dehydrogenase, and alkaline phosphatase, was undertaken. Skin biopsy from the limbs were collected at weekly intervals and histologically examined for Besnoitia cysts. Cysts were present in the skin biopsies of the leg of the infected goats from day 28 PI. There were variations in hematological analyses, but no significant difference was seen. From day 30 to 360 PI, results showed that SAA, Hp, fibrinogen, and ceruloplasmin concentrations increased, whereas testosterone concentrations decreased. Infected goats exhibited decrease of albumin and increase of serum total protein and globulin concentrations. By contrast, there were no significant differences in the remained analyses concentrations.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.335-344
• /
• 2011

The pearlesent pigment has received attention in a diversity of fields like cosmetics, inks, paints and so on. Ferric Ferrocyanide, one of the nano sized pearlescent pigment, is a kind of surface modification pigment that covers a metal oxidized substance or a coloring agent with uniform thickness. Characteristics of pearlescent pigment are various interference color, intense gloss effect and a three-dimensional effect. We synthesised the pearlesent pigment that ferric ferrocyanide can be deposited on the titania/mica surface by hydrothermal synthesis method. The process parameters are concentration of precursor, controlling pH and reaction temperature. The optimun conditions is that amount of iron(III) chloride hexahydrate is 3.1 wt% and amount of potassim ferrocynide trihydrate is 3.6 wt% in the started pH 4.5 at $70^{\circ}C$. The coating rate and coating efficiency of ferric ferrocyanide was about 1.47 % and 96.7 %, respectively. The synthesised pearlesent pigment was characterized by SEM, XRD, FT-IR and EDS.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.208-215
• /
• 2010

EAF dust which is contained around 30% of zinc, 15% of iron and 3% of lead individually, is chemically treated by ammonium chloride, ammonia water, ammonia gas and carbon dioxide, and also tested and identified the ratios of the recovery of In by applied the variations of particle size, pH and heating temperature as well, in order to getting optimized recovery of the In metal after performing all of those processes. Experimental results showed that the rate of Zn recovery is 97% when the mixture of 1.3 of $NH_4Cl$/EAF is heated to the temperature of $400^{\circ}C$ and leached by water, and 95% recovery of In when ammonia gas and carbon dioxide is added simultaneously and adjust the 9.5 of pH to the same mixture above. For the purpose of remove the impurities in the mixed sample, which is prepared by the two samples, indicated above showing as the ratio of 95% and 97% recovery, in case of applied the cementation process to it, and also by electrolytic process, produced the In plate of 95~97%, and acquired 99-99.5% of In metal ingot finally by applied the heating process at $470{\sim}500^{\circ}C$.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.2
• /
• pp.17-31
• /
• 1991

The effects of environmental agents on health are great concern for all. It was recognized that each human has differential susceptibility to environmental effects. Susceptibility are changed by many factors includin gdevelopmpntal processes, genetic factors, nutritional stratus, preexisting disease conditions, life style and personal habits. Of all factors nutritional factors seem to be the area most modifiable. Consequently, It is an area that must be more thoroughly evaluated. In this paper, nutrient and environment interactions are reviewed briefly with published literatures. This paper deals with the influence of micronutrients(energy, protein and fat), Vitamins (vitamin 4, vitamin B-complex, vitamin C, vitamin D and vitamin I) and Minerals(calcium, iron, selenium, zinc and other minerls) on environmental effects. The role of arch nutrient was assessed in modifyine the expression of environmental pollutant toxicity with available litertures. In each nutrient section, the effect of environment was considered in following agents : heavy metals(lead, cadmium, mercury, silver and etc), inorganic agents(nitwits, sulfite, fluoride and etc), organic agents(benzene, carbon tatra-chloride, aflatoxin, auto dye, dialbrin etc), Irritant gas(ozone, carbon monooxide and etc), physical agents(X-irradiation, ultra violet, temperature and noise) and insectcides. The extent to which nutritional status modifies environmental effects 3nd its converse, how envirollments affects nutritional status is very complex. In deed, at the present time there are more than 50 chelnical/phycical agents that affect the nutrient metabolism and/or have their toxicity either directly diminished or enhanced by nutrients of those agents, small number of agents for each nutrients have sufficient evidence to warrant any reasonable degree of confidence in their hypothesized associtation. With these information at this present time it is hard to conclude that the recommended dietary allowance for each nutrient should be reconsidered.

• Journal of the Korean Dietetic Association
• /
• v.23 no.4
• /
• pp.363-373
• /
• 2017

This study examined the characteristics of the foodservice menu items offered at senior welfare centers to provide information on Korean senior menu development. A total of 514 lunch menu items were collected from 27 senior welfare centers in April, July, October and January. The most frequently served staple foods, soups, and side dishes were multi-grain rice, seaweed soup, Bulgogi, Kimchi, and liquid yogurt. The proportions of carbohydrate, protein, and lipids of total energy serving of senior welfare centers were 59.8%: 16.7%: and 22.8%, respectively. The nutrients served at less than 40% of the Recommended Nutrient Intake (RNI) and Adequate Intake (AI) of Dietary Reference Intakes for Koreans (KDRIs) were chloride (1.0%), vitamin D (1.3%), biotin (1.7%), magnessium (4.5%), Iodine (7.5%), pantothenic acid (8.0%), vitamin E (12.5%), vitamin $B_6$ (20.0~21.4%), vitamin K (21.1~24.3%), and water (35.7~39.7%). The nutrients served in excess of the daily intake goal and RNI were iron (98.9~127.1%), sodium (104.9%), and copper (1,100.0%).

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.124-130
• /
• 2001

The in vitro activities of 2,2'-dipyridyl, an iron-chelator, against clinical isolates of Trichomonas vaginalis, Candida albicans, and Gardnerella vaginalis was evaluated and compared with those of four other vaginal suppositories, ornidazole, clotrimazole, povidone-iodine, and $Cenacert^{\circledR}$ (Methylbezethonium Chloride mixed with 9-aminoacrydine undecylenate and hydrochloric acid N-myristyl-3-hydroxy butyl amine). The 2,2'-dipyridyl killed T. vaginalis and G. vaginalis at concentrations of $410\;{\mu}g/ml$ and $205\;{\mu}g/ml$, respectively, however, ths agent was less active against C. albicans (80% of which was inhiited at $410\;{\mu}g/ml$). The inhibition of these three pathogens by 2,2'-dipyridyl was similar to clotrimazole. In addition, the effect of 2,2'-dipyridyl on the ultrastructure of T. vaginalis, C. albicans, an G. vaginalis was examined. Transmission electron microscopy indicated that 2,2'-dipyridyl induced modifications of the cellular contents and cell envolope concumitant with the degradation of the three pathogens. These results suggest that 2,2'-dipyridyl has an inhibitory effect on C. albicans and G. vaginalis, as well as T. vaginalis.

• Corrosion Science and Technology
• /
• v.2 no.6
• /
• pp.253-259
• /
• 2003

Zirconium based alloys have been extensively used as a cladding material for fuel rods in nuclear reactors, due to their low thermal neutron absorption cross-section, excellent corrosion resistance and good mechanical properties at high temperatures. However, a cladding material for fuel rods in nuclear reactors was contact water during long time at high-temperature, so it is necessary to improve the wear and corrosion resistance of the fuel cladding, At ambient environment, there are few data or paper on the characteristic of corrosion in chloride solution and acidic solution. The specimens used in this work are pure Zr and Zircaloy-4. Zircaloy-4 is a specific zirconium-based alloy containing, on a weight percent basis, 1.4% Sn, 0.2% Fe, 0.1% Cr. Pitting corrosion resistance of two alloys by ASTM G48 is higher than that of electrochemical method. Passive film formed on Zircaloy-4 is mainly composed of $ZrO_2$, metallic Sn, and iron species regardless of formation environments. Also, passive film formed on Zr alloys shows n-type semiconductic property on the base of Mott-Schottky plot.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.12
• /
• pp.1127-1131
• /
• 1996

[FeⅡ2(N-Et-HPTB)Cl2]BPh4(1), where N-Et-HPTB is the anion of N,N,N',N'-tetrakis(N-ethyl-2-benzimidazolylmethyl)-2-hydroxy-l,3-diaminopropane, has been synthesized to model dioxygen binding to the diferrous centers of proteins. 1 has a singly bridged structure with a μ-alkoxo of N-Et-HPTB and contains two five-coordinate iron(Ⅱ) centers with two chloride ligands as exogenous ligands. 1 exhibits an electronic spectrum with a λmax at 336 nm in acetone. 1 in acetone exhibits no EPR signal at 4 K, indicating diiron(Ⅱ) centers are antiferromagnetically coupled. Exposure of acetone solution of 1 to O2 at -90 ℃ affords an intense blue color intermediate showing a broad band at 586 nm. This absorption maximum of the dioxygen adduct(1/O2) was found in the same region of μ-l,2-peroxo diiron(Ⅲ) intermediates in the related complexes with pendant pyridine or benzimidazole ligand systems. However, this blue intermediate exhibits EPR signals at g = 1.93, 1.76, and 1.59 at 4 K. These g values are characteristic of S = 1/2 system derived from an antiferromagnetically coupled high-spin Fe(Ⅱ)Fe(Ⅲ) units. 1 is the unique example of a (μ-alkoxo)diferrous complex which can bind dioxygen and form a metastable mixed-valence intermediate. At ambient temperature, most of 1/O2 intermediate decays to form a diamagnetic species. It suggests that the dacay reaction of the intermediate might be bimolecular, implying the formation of mixed-valence tetranuclear species in transition state.

• Advances in concrete construction
• /
• v.5 no.6
• /
• pp.671-683
• /
• 2017

Commonly used concrete in general, consists of cement, fine aggregate, coarse aggregate and water. Natural river sand is the most commonly used material as fine aggregate in concrete. One of the important requirements of concrete is that it should be durable under certain conditions of exposure. The durability of concrete is defined as its ability to resist weathering action, chemical attack or any other process of deterioration. Durable concrete will retain its original form, quality and serviceability when exposed to its environment. Deterioration can occur in various forms such as alkali aggregate expansion, freeze-thaw expansion, salt scaling by de-icing salts, shrinkage, attack on the reinforcement due to carbonation, sulphate attack on exposure to ground water, sea water attack and corrosion caused by salts. Addition of admixtures may control these effects. In this paper, an attempt has been made to replace part of fine aggregate by tailing material and part of cement by fly ash to improve the durability of concrete. The various durability tests performed were chemical attack tests such as sulphate attack, chloride attack and acid attack test and water absorption test. The concrete blend with 35% Tailing Material (TM) in place of river sand and 20% Fly Ash (FA) in place of OPC, has exhibited higher durability characteristics.