• 접착 및 계면
• /
• 제1권1호
• /
• pp.38-46
• /
• 2000

Phosphine oxide와 불소를 함유하는 단량체(bis(3-aminophenyl) 3,5-bis (trifluoromethyl) phenyl phosphine oxide (mDA6FPPO))를 Grignard 반응에 의하여 합성한 다음, 이를 PMDA, 6FDA, BTDA 또는 ODPA와 함께 폴리이미드 합성에 사용하였다. 폴리이미드는 폴리아믹산을 합성한 후 이를 이미드화시키는 방법을 사용하였으며, FT-IR, NMR, DSC 및 점도측정기를 이용하여 분석하였다. 또한 T-peel 시험으로 접착강도를 측정하였다. Phosphine oxide를 함유하는 bis(3-aminophenyl) phenyl phosphine oxide (mDAPPO) 및 상용의 3.3'-diamino diphenyl sulfone (mDDS)로부터 합성된 폴리이미드와 비교하였다. 본 연구에서 합성된 mDA6FPPO를 사용하여 만들어진 폴리이미드는 높은 $T_g$, 우수한 용해도 및 접착성을 보였다.

• 분석과학
• /
• 제32권1호
• /
• pp.7-16
• /
• 2019

본 연구에서는 닥나무 인피섬유와 이를 이용하여 제조한 한지의 FT-NIR및 FT-MIR 스펙트럼 데이터를 각각PLS-DA에 적용하여 닥나무 인피섬유 및 한지의 원산지 판별 모델을 개발하고자 하였다. 본 연구를 위하여 서로 다른 원산지의 국내산 닥나무 인피섬유 10점을 채취하여 한지로 제조하였다. 상기시료의 FT-NIR 및 FT-IR 스펙트럼 데이터는 데이터 전처리 과정을 거쳐 PLS-DA를 수행하였다. 모델링 결과, 닥나무 인피섬유와 한지의 NIR 스펙트럼 데이터가 판별모델의 교차 검증결과 및 성능평가(정확도, 민감도, 특이도)에서 모두 100 %로 MIR 스펙트럼 데이터보다 우수한 판별 성능을 나타냈다. 또한 지역별로 4 개의 그룹을 형성하는 것을 확인 할 수 있었으며, 닥나무 인피섬유와 한지의 원산지 판별 모델 간 score 형태가 유사하게 나타내는 것을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.214-218
• /
• 1999

The aim of our study is to develop new algorism for sea fog detection by using Geostational Meteorological Satellite-5(GMS-5) and suggest the techniques of its continuous detection. So as to detect daytime sea fog/stratus(00UTC, May 10, 1999), visible accumulated histogram method and surface albedo method are used. The characteristic value during daytime showed A(min) > 20％ and DA < 10％ when visble accumulated histogram method was applied. And the sea fog region which detected is of similarity in composite image and surface albedo method. In case of nighttime sea fog(18UTC, May 10, 1999), infrared accumulated histogram method and maximum brightness temperature method are used, respectively. Maximum brightness temperature method(T_max method) detected sea fog better than IR accumulated histogram method. In case of T_max method, when infrared value is larger than T_max, fog is detected, where T_max is an unique value, maximum infrared value in each pixel during one month. Then T_max is beneath 700hpa temperature of GDAPS(Global Data Assimilation and Prediction System). Sea fog region which detected by T_max method was similar to the result of National Oceanic and Atmosheric Administration/Advanced Very High Resolution Radiometer (NOAA/AVHRR) DCD(Dual Channel Difference). But inland visibility and relative humidity didn't always agreed well.

• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.25-29
• /
• 2020

The purpose of this study was to investigate the characteristics of lignin fractionated from waste wood (WW) using a two-step process of ethanol organosolv pretreatment followed by ultrafiltration with membranes of different molecular weight cut-offs (1, 5 and 20 kDa). The different permeates obtained were characterized by fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA) and gel permeation chromatography (GPC). The analysis by FT-IR and NMR of these lignins showed that the lignin core was successfully separated from WW. TGA curves confirmed that the thermal properties of lignin fractionated by ultrafiltration were almost identical to each other. The results from GPC confirmed that fractionating of lignin was achieved by ultrafiltration. For the membrane fractionation process, values of molecular weight decreased as the cut-offs used to obtain the fractions became smaller. As a result, fractionating lignin by a two-step process allowed separating different fractions of lignin of different molecular weights yielded high purity without interference from existing pollutants in WW. The two-step process offers the possibility of using fractionated WW as an untapped source of lignin.

• 한국물환경학회지
• /
• 제33권1호
• /
• pp.34-39
• /
• 2017

Under a corrosive environment, electrodes that are applied in the water-treatment system need not only very high electrochemical activity for fast reactions, but also high durability for cost saving. Therefore, the fabrication condition of iridium electrodes was examined to produce a more durable iridium electrode in this study. Tantalum was selected as a binder to enhance the durability of the iridium electrode. Investigation of the weight ratio between the catalyst and the binder to improve electrochemical activity was performed. Also, to compare the effect of the different coating amounts of the catalyst, the results of CV (Cyclic Voltammetry) and EIS (Electrochemical Impedance Spectroscopy) were discussed. Furthermore, an ALT(Accelerated Lifetime Test) was designed and applied to the electrodes to determine the conditions for highly durable electrode fabrication.

• Archives of Pharmacal Research
• /
• 제28권8호
• /
• pp.977-982
• /
• 2005

The aim of this study was to compare two formulations of film-coated pellets containing c1arithromycin after single oral dose study in healthy male volunteers. Two formulations with different coating polymers were prepared: formulation-1 (F-1) was prepared by incorporating three kinds of pH-dependent gradient-release coated pellets into capsules and formulation-2 (F-2) was prepared by coated with an insoluble semiosmotic film. Release profiles of filmcoated pellets were evaluated using paddle method under different conditions. Pharmacokinetic profiles of these formulations were obtained in three healthy male volunteers and compared to commercially available immediate release (IR) tablets. The relative bioavailability based on the $AUC_{0-24h}$ was found to be $96.2\%\;and\;58.7\%$ for F-1 and F-2 compared with IR, and the $T_{max}$ was delayed.

• 천문학논총
• /
• 제30권2호
• /
• pp.535-537
• /
• 2015

Interpreting ultraviolet-to-infrared (UV-to-IR) observations of galaxies in terms of constraints on physical parameters-such as stellar mass ($M_{\ast}$) and star formation rate (SFR)-requires spectral synthesis modelling. We investigate how increasing the level of sophistication of the standard simplifying assumptions of such models can improve estimates of galaxy physical parameters. To achieve this, we compile a sample of 1048 galaxies at redshifts 0.7 < z < 2.8 with accurate photometry at rest-frame UV to near-IR wavelengths from the 3D-HST Survey. We compare the spectral energy distributions of these galaxies with those from different model spectral libraries to derive estimates of the physical parameters. We find that spectral libraries including sophisticated descriptions of galaxy star formation histories (SFHs) and prescriptions for attenuation by dust and nebular emission provide a much better representation of the observations than 'classical' spectral libraries, in which galaxy SFHs are assumed to be exponentially declining functions of time, associated with a simple prescription for dust attenuation free of nebular emission. As a result, for the galaxies in our sample, $M_{\ast}$ derived using classical spectral libraries tends to be systematically overestimated and SFRs systematically underestimated relative to the values derived adopting a more realistic spectral library. We conclude that the sophisticated approach considered here is required to reliably interpret fundamental diagnostics of galaxy evolution.

• 치위생과학회지
• /
• 제8권3호
• /
• pp.109-115
• /
• 2008

치과용 가시광선 중합형 복합수지의 광중합효율을 높이기 위해 2종의 새로운 액체형 amine 개시제인 MA, MPT와 현재 가장 많이 사용되고 있는 개시제인 AEM을 CQ, PD, DA에 각각 첨가하고 UDMA의 광중합효율을 알아본 결과 다음과 같은 결론을 얻었다. 1. 조사시간이 증가됨에 따라 amine 개시제의 종류에 관계없이 광중합효율이 점차 증가되었으며, 약 60초까지 조사였을 때에는 광중합효율이 급격히 증가되었으나 그 이상 조사하여도 광중합효율이 크게 증가되지 않았다. 2. AEM, MA와 MPT를 사용하였을 경우 모두 CQ > PD > DA의 순으로 광중합효율이 우수하게 나타났으나 AEM을 사용하였을 때 PD와 CQ는 큰 차이를 보이지 않았다. 3. CQ의 광중합효율은 새로운 광개시제인 MA와 MPT를 사용하였을 때가 범용으로 사용되고 있는 amine 개시제인 AEM을 사용하였을 경우보다 중합효율이 증가하는 결과를 보였다. 4. PD의 광중합효율은 MA와 함께 사용하였을 경우가 가장 높게 나타났으나 AEM의 경우와 큰 차이를 보이지는 않았다. 5. 이상의 결과로부터 MA와 CQ 및 PD를 함께 사용한 새로운 광중합시스템이 광중합효율을 높이는데 효율적인 것을 알 수 있었다.

• Mycobiology
• /
• 제48권1호
• /
• pp.51-57
• /
• 2020

A polysaccharide (LVP) was purified from fruiting body of Lentinus velutinus by ethanol precipitation fractionation and DEAE and Sephadex G-100 column chromatography. The yield of purified polysaccharide was 0.025%. Molecular characteristics of LVP were determined by gel permeation chromatography, FT-IR spectroscopy, and thin-layer chromatography. Our results revealed that LVP is a polysaccharide composed of only glucose units, and has a molecular weight of 336 kDa. Biological activity assays indicated that LVP exhibits both cytotoxic and antioxidant activity. LVP showed specific cytotoxicity against cancer cells (HeLa and HepG2 cells), and alterations in cancer cell morphology were found after LVP treatment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.950-953
• /
• 2006

SIMP is an international project funded by INTAS aimed at improving the information content, which can be inferred from multi-sensor satellite imagery of marine coastal areas. Scientific teams from Germany, UK, Portugal, and Russia focus on the development of novel tools for marine remote sensing of the coastal zone. In particular, the project teams' benefit from the fact that surface films may enhance the signatures of hydrodynamic processes such as plumes, internal waves, eddies, etc., on microwave, optical, and infrared imagery. The project's objectives are to develop a robust methodology for identifying slick-related phenomena/processes through their surface signatures and thereby, to improve the discrimination capabilities between slicks and other oceanic and atmospheric phenomena by taking into account information gained from satellite imagery quasi-simultaneously recorded at microwave, visible and IR wavelengths. The results of the two project years are summarized. Examples are given for the project’s web presentation, laboratory and field experiments, and of the analyses of various satellite data.