• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2114-2121
• /
• 2002

In order to study the effects of oblique tabs on the in-plane shear properties of unidirectional carbon fiber reinforced aluminum laminate composites, the 10$^{\circ}$off-axis tensile test, the 45 $^{\circ}$off-axis tensile test and Iosipescu shear test were performed to determine the shear properties. Off-axis tension test was studied by using new oblique-shaped tabs proposed by Sun and $Chung^{(7)}$. Iosipescu shear test was studied by using modified Wyoming test fixture. The oblique tabs reduced remarkably end-constraint effects of off-axis specimens with a aspect ratio of about eight. The experimental results show that there is no significant difference between off-axis test results and those of Iosipescu shear test. The 45$^{\circ}$off-axis tensile tests are recommended for the determination of the shear properties of unidirectional carbon fiber reinforced aluminum laminated composites.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.96-99
• /
• 2002

In order to determine the in-plane shear properties of unidirectional carbon fiber reinforced aluminum laminate composites, a new Iosipescu shear test fixture was developed, by using a fixture undergoing tensile force for the specimen edge to be subjected to compressive loads assumption, under plane stress. Also, to compare the results, Iosipescu shear test method by the modified Wyoming fixture and the off-axis tensile test were performed to determine the shear properties. Off-axis tension test was performed by using new oblique-shaped tabs proposed by Sun and Chung. [5] The oblique tabs reduced remarkably end-constraint effects of off-axis specimens with a aspect ratio of about eight. It is observed through the experimental results show that there is no significant difference between off-axis test results and those of Iosipescu shear test.

• 한국산업융합학회 논문집
• /
• 제3권1호
• /
• pp.61-67
• /
• 2000

Effective shear modulus of continuous fiber reinforced polymeric composites is measured using a modified Iosipescu Shear Test(IST) and compared with data obtained by finite element analyses that a concept of unit cell is. It is found that the numerical results of the longitudinal shear modulus give a good agreement with experimental data at lower fiber volume fraction. In this paper, both the distance and stress transfer between the fibers are discussed as the major factors.

• Composites Research
• /
• 제23권6호
• /
• pp.61-66
• /
• 2010

본 논문에서는 필라멘트 와인딩 시 장력에 의해 압밀을 유발하는 압력을 선행연구자들의 연구를 참조하여 결정한 후 T800 탄소섬유/에폭시 복합재료의 기본적인 물성과 성형압력 변화에 따른 면 내 외의 물성 변화를 측정하였다. 실험 시편은 오토클레이브 진공백 성형을 통해 압력(절대압력 0.1MPa, 0.3MPa, 0.7MPa)을 조절하여 제조되었다. 모든 시편은 적층판 형태로 정화된 후 워터젯을 이용하여 시편 모양으로 절단되었으며, 층간 전단시편의 V-노치는 밀링가공을 통하여 제작되었다. 평면 내 물성을 위해 다양한 인장실험이 실시되었으며, 평면 외 물성을 측정하기 위해 층간 전단 실험이 수행되었다 성형압력과 물성 변화를 관련시키기 위해 시편의 섬유 부피분율을 측정하였다. 본 연구에서 측정된 물성은 동일한 탄소섬유 (T800 탄소섬유)를 사용하여 필라멘트 와인딩 공정으로 제작되는 차량용 Type III 수소저장용기의 설계에 유용하게 활용될 수 있을 것으로 기대된다.