• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.683-688
• /
• 2001

In case of constructing the concrete structures under seawater environment, the concrete suffers from deterioration due to penetration of various ions such as chloride, sulfate and magnesium in seawater. Tn the present study, Immersion tests with artificial seawater were carried out to investigate the resistance to seawater attack of antiwashout underwater concrete. From the results of compressive strength, it was found that blended cement concrete due to mineral admixtures such as fly ash(FA) and ground granulated blast-furnace slag(SGC), were superior to ordinary portland cement concrete with respect to the resistance to seawater attack. Moreover, XRD analysis indicated that the formed reactants of ordinary portland cement paste by sulfate and magnesium ions led to the deterioration of concrete. As expected, however, the blended cements with FA or SGC have a good resistance to seawater attack. This paper would discuss the mechanism of seawater deterioration and benefical effects of antiwashout underwater concretes with mineral admixtures.

• Proceedings of KOSOMES biannual meeting
• /
• 2009.06a
• /
• pp.145-147
• /
• 2009

Nutrients in wastewater should be removed prior to release in the receiving waters to prevent the occurrence of eutrophication. In this study, seawater is used to remove ammonia and phosphate by the formation of struvite ($MgNH_{4}PO_{4}{\cdot}6H_{2}O$). It aims to know the optimum conditions for the removal of nutrients using seawater as source of magnesium ions. Experiments were performed using jar tester and pH of ammonium-phosphate solutions were adjusted Samples were drawn at different mixing times. It was shown that simultaneous removal of ammonia and phosphate is rapid, with no significant reduction beyond 10 min of mixing Another important parameter is pH, where range 10-11 showed the optimum nutrient removal. Increase in the volume of seawater, which meant an increase in magnesium ions also lead to better removal.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.379-384
• /
• 2002

The deterioration of concrete due to sulfate ions in various sulfate environments such as groundwater, soil and seawater is one of important factors degrading the durability of concrete structure. The aim of this paper is to evaluate on the magnesium sulfate alttack resistance of mortars with silica fume. In this study, compressive strength loss and length change of prismatic mortars, containing silica fume, immersed in 5% magnesium sulfate solution for 270 days were investigated. Additionally, paste powders with same binder were used to observe reactants of cement matrices through the instrumental analysis such as XRD, SEM and MIP. Results obtained from this study indicate that the greater damaging effects of the magnesium soulution are due to the decomposition of the C-S-H gel to M-C-S-H.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.683-690
• /
• 2016

Modified coagulants were investigated for the removal of phosphorus from secondary effluent of wastewater treatment. The modified coagulants were prepared by mixing alkali earth metal ions such as calcium and magnesium. The basicity of a coagulant influenced on the removal of phosphorus, and coagulants with basicity of 5.9% showed a better removal of total phosphorus than that of 38.5%. Also, coagulants with alkali earth metals enhanced the performance of coagulation by 10% and resulted in 67.1% for total phosphorus removal. Moreover, the removal of suspended solids and chemical oxygen demand was improved using coagulants with low basicity and earth metal ions. Results of this study demonstrated that the use of coagulants with low basicity, and calcium and magnesium ions is recommended to improve wastewater effluent quality.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.551-564
• /
• 2003

Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.399-402
• /
• 2000

When concrete structures are built in marine environment, they may be deteriorated and have the poor durability and quality caused by steel corrosion or by chemical attack of magnesium or sulfate ions. Especially, Mg ions contained in seawater make concrete surface weaken by chemical reaction with $Ca(OH)_2$ In this study, a concrete structure built in 1947 was investigated to estimate the factors, especially chemical attack, which can cause concrete to deteriorate. Furthermore, the instrumental analysis methods such as XRD and ESEM were performed to find the reactants in concrete under marine environment.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.450-454
• /
• 2023

Chloride ions in the alloy powder used as flux in Flux Cored Arc Welding (FCAW) can cause pores on the bead surface of the welding metal to cause defects, or chloride remaining in the alloy powder can cause corrosion of the metal. Combustion-ion chromatography is mainly used to quantify the chloride ions in alloy powder, but there is a limitation in that the equipment is expensive and requires a high degree of expertise. Therefore, this study aims to find an easy and accurate quantification method in the field by comparing combustion-ion chromatography (C-IC), which is mainly used for chloride ion quantification of alloy powder, X-ray fluorescence analysis (XRF), and potentiometric titration. In this article, magnesium-aluminum alloy powder is applied to the quantification of chloride ions because it is most commonly used as flux. This study confirmed that potentiometric titration can be applied to the quantification of chloride ions in the alloy powder in the industry field.

• The Korean Journal of Pain
• /
• v.13 no.1
• /
• pp.31-37
• /
• 2000

Background: Recent studies suggested that a preoperative block of N-methyl-D-aspartate (NMDA) receptors with NMDA antagonists may reduce postoperative pain. In this double-blind study, magnesium sulfate, a natural NMDA receptor antagonist, was administered preoperatively to investigate the effects of magnesium sulfate on postoperative pain and pulmonary function. Methods: Seventy patients who were to undergo gastrectomy under general anesthesia were randomly assigned to one of three groups. Groups 2 and 3 received intravenous magnesium, preoperatively (Group 2: 50 mg/kg bolus, 7.5 mg/kg/hr for 20 hr, Group 3: 50 mg/kg bolus, 15 mg/kg/hr for 20 hr). Group 1 received normal saline as the control group. Visual analog scale (VAS) for postoperative pain and mood, cumulative analgesic consumption, recovery of pulmonary function and side effects were evaluated at 6, 24, 48 and 72 hours after the operation. Results: In Groups 2 and 3, plasma concentration of magnesium were significantly higher than in Group 1 at 6 and 20 hours after infusion (P<0.05). There were no significant differences in the analgesic consumption, and recovery of pulmonary function and the incidence of side effects at 6, 24, 48 and 72 hours after the operation among the three groups. In Group 3, pain scores at rest measured 24 and 48 hours after operation were lower than the control group, and pain scores when deep breathing were significantly lower than the control group at postoperative 6, 24, 48, and 72 hours. Conclusions: We conclude that intravenous infusion of greater amount of magnesium has little effectiveness in reducing postoperative pain. However, further studies are needed to characterize the clinical significance of these effects on postoperative pain.

• Corrosion Science and Technology
• /
• v.21 no.6
• /
• pp.454-465
• /
• 2022

The objective of this study was to determine effects of temperatures and pH of sodium chloride solution with MgCl₂ ions on corrosion resistance of duplex stainless-steel X2CrNiMoN22-5-3 (DSS) and Ti 6Al 2Nb1Ta1Mo (Ti). Effects of sodium chloride concentration on corrosion resistance were also studied. Corrosion behavior and pitting morphology of duplex stainless steel (DSS) and Ti alloys were evaluated through potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). It was found that a decrease in pH significantly reduced the corrosion resistance of both alloys. Changes in chloride concentration and temperature had more substantial impact on corrosion behavior of DSS than on Ti alloys. Pitting corrosion was formed on DSS samples under all conditions, whereas crevice corrosion was developed on Ti samples with the presence of magnesium chloride at 90 ℃. In conclusion, magnesium chloride ions in an exceedingly strong acidity solution appear to interact with re-passivation process at the surface of these alloys and influence the resulting surface topography.

• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.81-87
• /
• 1996

The purpose of this research is to examine the utilization of oyster shells for neutralization and removal of heavy metal ions in plating wastewater, because oyster shells have been known to be very porous, to have high specific surface area and to have alkaline minerals such as calcium and magnesium. The results obtianed from this research showed that oyster shells had a buffer capacity to neutralize an acidic.alkali system in plating wastewater. Generally, it could be showed that the removal efficiencies of heavy metal ions were very influenced by reaction times and oyster shell dosages. In point of ocean waste, if oyster shells substituted for a valuable adsorbent such as actviated carbon, they could look forward to an expected economical effect.