• 대한환경공학회지
• /
• 제33권4호
• /
• pp.231-236
• /
• 2011

본 연구는 알루미늄 응집에 의한 인 제거 공정에 마그네슘 및 칼슘과 같은 2가의 금속이온을 첨가하였을 경우 인의 응집특성에 미치는 영향을 조사하였다. 인을 제거하기 위한 최적 알루미늄 응집 pH는 약 5~6 사이이며, 그 이상 pH에서는 TP 제거효율이 감소하였다. 마그네슘이나 칼슘과 같은 2가의 금속이온을 알루미늄 응집공정에 함께 사용할 경우 pH 6 이상 에서도 TP 및 $H_nPO_4^{n-3}$ 제거효율은 안정적으로 95% 이상을 유지하였다. 응집초기 $Al^{3+}/H_nPO_4^{n-3}$ (Al/P) 몰비가 3 이상에서 TP 제거효율이 80% 이상 높게 유지되었으며, 응집 후 잔류 TP 농도를 0.2 mg/L 이하로 제어하기 위해서는 Al/P 몰비는 약 6 이상 이었다. 마그네슘이나 칼슘 이온을 알루미늄 응집공정에 함께 사용할 경우 TP 제거를 위한 최적의 알루미늄 대비 마그네슘 및 칼슘 이온의 몰비($Al^{3+}/Mg^{2+}$ or $Ca^{2+}$)는 모두 2이었다. 알루미늄 응집공정에 마그네슘이나 칼슘 이온을 함께 사용하면, 동일한 양의 TP를 제거하기 위한 알루미늄 응집제 주입량이 감소하였고, 결과적으로 최종 슬러지 발생량도 감소하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권4호
• /
• pp.227-238
• /
• 2013

본 연구의 목적은 해수담수화 과정 중 황산이온과 염소이온은 제거하고 유용미네랄인 마그네슘, 칼슘은 잔존 시키는 미네랄 수질 조정 기술로 먹는물 수질기준에 맞는 고경수 제조 공정 개발에 있다. 역삼투막(RO)에 통과시켜 농축수(Concentrated deep seawater)와 탈염수(desalted deep seawater)를 제조하고, 나노여과막(NF)를 사용하여 염화나트륨이 제거되지 않은 1차 미네랄 농축수(Mineral enriched deep seawater)를 제조하여, 전기투석 이온교환막(ED)을 가동하여 염화나트륨을 제거한 탈염 미네랄농축수(Mineral enriched desalted water)를 제조하여 이를 RO 탈염수와 희석하여 고경도 먹는해양심층수를 제조하였다. 역삼투막은 해수(해양심층수) 원수에서 용존물질과 담수를 분리할 수 있으며, 2차에 걸쳐 역삼투막을 사용하면, 용존성분 중 99.9% 이상 제거되고, 경도 1이하, 염소이온의 농도 2.3 mg/L인 용존물질이 완전히 제거된 탈염수(순수)를 제조할 수 있었다. 나노여과막 (NF 막)의 간극은 $10^{-9}$ m으로 마그네슘과 칼슘은 50%정도 통과시키며, 염소이온과 나트륨 같은 일가이온은 95%이상 통과한다. 나노여과막은 마그네슘과 칼슘과 같은 경도 성분과 나트륨과 염소이온과 같은 염분성분을 분리 농축할 수 있지만, 완벽하게 분리하지는 못한다. 전기투석막(ED)은 전기전도도에 따라 경도성분의 이가이온과 염분성분인 일가이온이 분리된다. 전기전도도 20 mS/cm 이상에서 경도성분(마그네슘이온, 칼슘 이온 등)은 제거되지 않는 반면, 염분성분 (나트륨이온, 염소이온 등)은 지속적으로 제거되었다. 따라서, 나노여과막을 이용하여 마그네슘과 칼슘과 같은 경도 성분을 농축하고, 전기투석막을 이용하여 경도농축수에서 염분성분을 분리하여 경도농도 12,600 mg/L, 염소이온 농도 2,446 mg/L의 염분성분이 배제된 고경도 농축수를 제조할 수 있었다. 이러한 고경도수를 역삼투막을 이용하여 용존물질이 모두 제거된 2차 RO 생산수로 10배 희석하면 염소이온 농도 244 mg/L 로 먹는물 수질기준에 적합하면서 경도농도 1,260 mg/L 인 고경도 수 제조도 가능하였다. RO/NF/ED 또는 NF/ED 연계공정은 해수의 증발 없이 역삼투막, 나노여과막과 전기투석막만을 이용하여 염소이온과 나트륨, 칼륨, 황산이온과 같은 염분성분을 제거하면서 마그네슘과 칼슘과 같은 경도성분은 농축할 수 있어서 먹는물 수질기준에 적합한 고경도수 제조가 가능하였으며, 이 과정 중 소모되는 에너지를 줄일 수 있었다.

• Applied Science and Convergence Technology
• /
• 제26권2호
• /
• pp.21-25
• /
• 2017

The shape of the reflection spectrum is complex and appears to overlap with several signals, because the surface state is uneven due to the natural oxide film, so that the spectrum becomes a complicated signal shape divided into regions 1 and 2 due to diffuse reflection. On the other hand, it is seen that the reflection spectrum after PEO surface treatment is overlapped with several signals. In addition, the reflectance of the energy band varies from 1.32 to 1.46 eV. Usually, the MgO-type oxide film was observed at an energy band of ~4.2 eV. The thickness of the oxide film was increased as the DC voltage was increased by the thin film thickness meter (QuaNix; 7500M) after Plasma Electrolytic Oxidation (; PEO) surface treatment. This is because the higher the DC voltage, the easier the binding of the $OH^-$ ions in the solution solution and the $Mg^+$ ions of the magnesium alloy. An important part of the bonding of ordinary ions is the energy source (plasma) which can promote bonding. However, when a certain threshold voltage or more is applied, the material is adversely affected. The oxide film of the surface may be destroyed without increasing the thickness of the oxide film, that is, whitening of the material may occur.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.939-944
• /
• 2012

본 연구에서는 $MgCl_2-CaCl_2$-NaCl 혼합용융염에서 $Mg^{2+}$ 이온의 전기화학적 거동을 평가하였다. $MgCl_2-CaCl_2$-NaCl 용융염에서 순환전압전류법 측정을 통해 $Mg^{2+}$이온의 환원전위를 측정하였고, $MgCl_2$의 농도 변화 및 용융염의 온도변화에 따른 환원전위의 영향에 대해 살펴보았다. 그리고 각각 660, 680, 700, 720 및 $740^{\circ}C$의 온도에서 $Mg^{2+}$ 이온의 확산계수를 계산한 결과 $8.79{\times}10^{-6}$, $9.56{\times}10^{-6}$, $1.17{\times}10^{-5}$, $1.4{\times}10^{-5}$ 및 $1.77{\times}10^{-5}\;cm^2\;s^{-1}$로 측정되었다. 또한 Arrhenius 식을 통해 $Mg^{2+}$ 이온의 확산에 대한 활성화 에너지는 $70.28\;kJ\;mol^{-1}$로 계산되었다.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.573-579
• /
• 2004

Electroflotation, which is used as an alternative to sedimentation, is a separation treatment process that uses small bubbles to remove low-density particulates. Making allowances for recent collision efficiency diagram based on trajectory analysis, it is necessary to tailor zeta potential of bubbles that collide with negatively charged particles. In this paper, the study was performed to investigate the effects of magnesium and aluminium ions on zeta potential of bubbles. And, it was studied to find out factors which could affect the positively charged bubbles. Consequently, zeta potential of bubbles increased both with higher concentration of metal ions and in the acidic pH value. And, a probable principle that explained the procedure of charge reversal could be a combined mechanism with both specific adsorption of hydroxylated species and laying down of hydroxide precipitate. It also depended on the metal ion concentration in the solution to display its capacity to control the bubble surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.230.2-230.2
• /
• 2015

Nanoparticles of magnesium ferrite are used as a heterogeneous catalyst, humidity sensor, oxygen sensor and cure of local hyperthermia. These applications usually utilize the magnetic behavior of these nanoparticles. Moreover, magnetic properties of nanoferrites exhibit rather complex behavior compared to bulk ferrite. The magnetic properties of ferrites are complicated by spins at vortices, surface spins. Reports till date indicate strong dependency on the structural parameters, oxidation state of metal ions and their presence in octahedral and tetrahedral environment. Thus we have carried out investigation on magnesium ferrite nanoparticles in order to study coordination, oxidation state and structural distortion. For present work, magnesium ferrite nanoparticles were synthesized using nitrates of metal ions and citric acid. Fe L-edge spectra measured for these nanoparticles shows attributes of $Fe^{3+}$ in high spin state. Moreover O K-edge spectra for these nanoparticles exhibit spectral features that arises due to unoccupied states of O 2p character hybridized with metal ions. Mg K-edge spectra shows spectral features at 1304, 1307, 1311 and 1324 eV for nanoparticles obtained after annealing at 400, 500, 600, 800, 1000, and $1200^{\circ}C$. Apart from this, spectra for precursor and nanoparticles obtained at $300^{\circ}C$ exhibit a broad peak centered around 1305 eV. A shoulde rlike structure is present at 1301 eV in spectra for precursor. This feature does not appear after annealing. After annealing a small kink appear at ~1297 eV in Mg K-edge spectra for all nanoparticles. This indicates changes in local electronic structure during annealing of precursor. Observed behavior of change in local electronic structure will be discussed on the basis of existing theories.

• Bulletin of the Korean Chemical Society
• /
• 제10권4호
• /
• pp.349-352
• /
• 1989

Two Crystal structures of fully dehydrated partially magnesium exchanged zeolite A, stoichiometries of $Mg_{2.5}Na_7-A$ (a = 12.251 (1) ${\AA}$) and $Mg_{1.5}Na_9-A\; (a\;=\;12.214(1)\;{\AA})$ per unit cell, have been determined from the 3-dimensional X-ray diffraction data gathered by counter methods. All structures were solved and refined in the cubic space group Pm3m at 21(1)$^{\circ}C$. The structures of the dehydrated $Mg_{2.5}Na_7-A$ and $Mg_{1.5}Na_9-A$ were refined to yield the final error indices $R_1$ = 0.042 and $R_2$ = 0.049 with 318 reflections, and $R_1$ = 0.034 and $R_2$ = 0.032 with 252 reflections, respectively, for which I > $3{\sigma}(I)$. Both structures indicate that $Mg^{2+}$ ions are coordinated by three framework oxygens and the angle substended at $Mg^{2+}$ ions, O(3)-Mg(1)-O(3) is ca. $120^{\circ}$, close to the idealized trigonal planar value. $Mg^{2+}$ ions preferentially occupy 6-ring sites and $Na^+$ ions occupy 8-ring sites when total number of cations per unit cell is more than 8.

• 한국환경과학회지
• /
• 제12권10호
• /
• pp.1061-1069
• /
• 2003

The adsorption behaviors of strontium and cesium ions on fly ash, natural zeolites, and zeolites synthesized from fly ash were investigated. The zeolites synthesized from fly ash had greater adsorption capabilities for strontium and cesium ions than the original fly ash and natural zeolites. The maximum adsorption capacity of synthetic zeolite for strontium and cesium ions was 100 and 154 mg/g, respectively, It was found that the Freundlich isotherm model could fit the adsorption isotherm. The distribution coefficients (K$\_$d/) for strontium and cesium ions were also calculated from the adsorption isotherm data, The distribution coefficients decreased with increasing equilibrium concentration of strontium and cesium ions in solution. By studying the removal of cesium and strontium ions in the presence of calcium, magnesium, sodium, potassium, sulfate, nitrate, nitrite, and EDTA (in the range of 0.01 - 5 mM) it was found that these coexistence ions competed for the same adsorption sites with strontium and cesium ions.

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.1-13
• /
• 2016

This review deals with one of the surface modification techniques, chemical conversion coating and particularly cerium-based conversion coatings (CeCC) as a promising substitute for chromium and phosphate conversion coating on magnesium and its alloys. The CeCCs are commonly considered environmentally friendly. The effects of surface preparation, coating thickness, bath composition, and e-paint on the corrosion behavior of CeCCs have been studied on the AZ31 magnesium alloy. This review also correlates the coating microstructural, morphological, and chemical characteristics with the processing parameters and corrosion protection. Results showed that the as-deposited coating system consists of a three layer structure (1) a nanocrystalline MgO transition layer in contact with the Mg substrate, (2) a nanocrystalline CeCC layer, and (3) an outer amorphous CeCC layer. The nanocrystalline CeCC layer thickness is a function of immersion time and cerium salt used. The overall corrosion protection was crucially dependent on the presence of coating defects. The corrosion resistance of AZ31 magnesium alloy was better for thinner CeCCs, which can be explained by the presence of fewer and smaller cracks. On the other hand, maximum corrosion protection was achieved when AZ31 magnesium samples with thin CeCCs are e-painted. The e-paint layer further restricts and hinders the movement of chloride and other aggressive ions present in the environment from reaching the magnesium surface.

• Membrane and Water Treatment
• /
• 제8권4호
• /
• pp.381-393
• /
• 2017

The inorganic components in tobacco sheet extract have significant influence on the sensory taste of the cigars and the harmful component delivery in cigarette smoke. To identify the contributions of the divalent inorganic components on harmful components delivery in cigarette smoke, a self-made selective electrodialysis was assembled with monovalent ion-selective ion exchange membranes. The influences of current density and extract content on the desalination performance were investigated. Result indicates that the majorities chloride, nitrate, and sulfate ions were removed, comparing with 50-60% of potassium and only less than 10% of magnesium and calcium ions removed in the investigated current density. The permselectivity of the tested cations across the Selemion CSO cation exchange membranes follows the order: $K^+>Ca^{2+}>Mg^{2+}$. A current density of $15mA/cm^2$ is an optional choice by considering both the energy consumption and separation efficiency. When the extract contents are in the range of 7%-20%, the removal ratios the potassium ions are kept around 60%, while the removal ratios of the calcium and magnesium ions fluctuate in the range of 16-27% and 8-14%, respectively. The tobacco smoke experiments indicated that the divalent metal ions have dual roles for the harmful component delivery in cigarette smoke. The divalent potassium and calcium ions were unfavorable for the total particulate matter emission but beneficial to decrease the HCN delivery in the mainstream cigarette smoke. The selective electrodialysis is a robust technology to decrease the harmful component delivery in cigarette smoke.