• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.354-359
• /
• 2003

The microwave dielectric characteristics of (1-x)(Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)O$_2$-x(Mg$\_$1/3/Ta$\_$2/3/)O$_2$ (0$\leq$x$\leq$1.0) ceramics were investigated by crystalstructure, variations of ionic polarizability, and microstructures. As x increased, (1-x)(Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)O$_2$-x(Mg$\_$1/3/Ta$\_$2/3/)O$_2$ transformed to tetragonal structure. Because the ionic radius of (Mg$\_$1/3/Ta$\_$2/3/)$\^$4+/was slightly bigger than one of (Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)$\^$4+/, the cell parameters increased with increase of (Mg$\_$1/3/Ta$\_$2/3/)O$_2$concentration and coincided with prediction of the molecular additivity rule. As x increased, the compositions revealed ordered phase and were of single phase above 60 mol%. The increase of the ordered phase and grain size enhanced the Q and when ordering was completed at x over 0.6, the grain size was major factor for the increase in the a. Though the grain size increased, however, the porosity deteriorated the q. Therefore, the a depended on the order/disorder, the porosity, and the grain size in regular order.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.149-155
• /
• 1997

We have successfully grown colorless and transparent Rb-doped potassium niobate (KRN) single crystals using the top seeded solution growth(TSSG) technique. In our crystal growth experiments, the Rb doping concentrations within the melt range from 2-15 mol% relative to that of Nb$_2$O5. Atomic absorption measurements indicate that the Rb content in the KRN solid solution is rather low; the Rb segregation coefficient is found to be on the order of 0.05. It is believed that this is due to the relatively much larger Rb+ ionic radius compared to that of K+, rendering it more difficult for Rb to replace K in the KNbO$_3$(KN) host lattice. Preliminary single-pass second harmonic generation (SHG) experimental results indicate that there exists marginal improvement in the phase-matching temperature tolerance of KRN compared to that of pure Kn single crystals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.142-142
• /
• 2009

Bismuth-substituted yttrium iron garnet(Bi-YIG; $Bi_xY_{3-x}Fe_5O_{12}$, x=0, 0.5, 1.0, 1.5, 2.0) thin films were fabricated on glass substrates using a metal organic decomposition (MOD) method. The dielectric property was measured by NSMM(Near-field scanning microwave microscopy) system that operating frequency is 4 Ghz. The obtained reflection coefficient $S_{11}$ of the Bi:YIG thin films with different bismuth concentration was increased as the bismuth concentration increased due to the lattice mismatch and vacancy of ions because of a lager ionic radius of bismuth ion than yttrium ion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.411.1-411.1
• /
• 2016

In this study, we examined the effects of boron doping on the dielectric reliability of solution processed aluminum oxide ($Al_2O_3$). When boron is doped in aluminum oxide, the hysteresis reliability is improved from 0.5 to 0.4 V in comparison with the undoped aluminum oxide. And the accumulation capacitance is increased when boron was doped, which implying the reduction of the thickness of dielectric film. The improved dielectric reliability of boron-doped aluminum oxide is originated from the small ionic radius of boron ion and the stronger bonding strength between boron and oxygen ions than that of between aluminum and oxygen ions. Strong boron-oxygen ion bonding in aluminum oxide results dielectric film denser and thinner. The leakage current of aluminum oxide also reduced when boron was doped in aluminum oxide.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1095-1098
• /
• 2004

In this study, $Bi_2O_3-B_2O_3-ZnO$ glass system, which was expected to have similar properties with PbO containing glass system, was selected as a PbO replaceable potential composition because the atomic weight and ionic radius of Bi is similar to those of Pb. Glasses with different modifier/former ratio were prepared by melting the raw ingredient mixtures in $Bi_2O_3-B_2O_3-ZnO$ system, and the thermal and electrical properties of the sintered samples were examined. The glass transition temperatures and the dielectric constant of the glass pellets were between 350 $^{\circ}C{\sim}$500 $^{\circ}C$ and 15-35, respectively.

• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.589-593
• /
• 2008

The hydroxyapatite with different amounts of strontium was synthesized with wet chemical technique. The structural, morphological and chemical characterizations for the prepared hydroxyapatite with various strontium amounts were carried out with XRD, SEM, EDS, and FT-IR. Strontium is quantitatively incorporated into hydroxyapatite where its substitution for calcium provokes a well distribution in the EDS mapping and a linear shift of the infrared absorption bands of the hydroxyl and phosphate groups, coherent with the greater ionic radius of strontium.

• Computers and Concrete
• /
• v.4 no.2
• /
• pp.157-166
• /
• 2007

The paper considers a theoretical model to study sulfate ion diffusion in saturated porous media - cement based mineral composites, accounting for simultaneous effects, such as filling micro-capillaries (pores) with ions and chemical products and liquid push out of them. Pore volume change and its effect on the distribution of ion concentration within the specimen are investigated. Relations for the distribution of the capillary relative radius and volume within the composite under consideration are found. The numerical algorithm used is further completed to consider capillary size change and the effects accompanying sulfate ion diffusion. Ion distribution within the cross section and volume of specimens fabricated from mineral composites is numerically studied, accounting for the change of material capillary size and volume. Characteristic cases of 2D and 3D diffusion are analyzed. The results found can be used to both assess the sulfate corrosion in saturated systems and predict changes occurring in the pore structure of the composite as a result of sulfate ion diffusion.

• Carbon letters
• /
• v.8 no.1
• /
• pp.30-36
• /
• 2007

Oxidized PAN (OXI-PAN) fibers were used for the precursors of activated carbon fiber in study. How drying temperature affected the properties of carbon fibers on activating process of carbon fibers was investigated. The specific surface areas of activated carbon fibers have been determined on a series of chemically activated carbons with KOH and NaOH. The experimental data showed variations in specific surface area, iodine and silver adsorptions by the activated carbon fibers. The amount of iodine adsorption increases with increasing specific surface areas in both activation methods. This was because the ionic radius of iodine was smaller than the interior micropore size of activated carbon fibers. Silver adsorbed well in NaOH activated carbon fibers rather than KOH activated carbon fibers in this study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.59-62
• /
• 2003

This study investigated the phase transformation of the $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, By) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. According to result of fabricated single crystal of RE-123 superconductor through TSMG method based on phase transformation neted among heat treatment process, when the ionic radius elements was decreased, RE-211 phase was well-distributed. According to result that examine about seed of pretreatment effect of TSMG method, magnetic hysteresis improved when preprocess among oxygen atmosphere in same seed. and used after. Effect of miscut expressed good superconducting special quality in case miscut uses big seed.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.225-228
• /
• 1985

The absorptions of Fe(Ⅲ), Tb(Ⅲ), Tl(Ⅰ), Ce(Ⅲ), Th(Ⅳ), and $UO_2^{2+}$ ions into the Dowex 50W-X2, 100-200 mesh resin were investigated by spectrophotometry to understand the abnormal strong absorption behavior of cations to cation exchange resins in concentrated HClO4. The distribution coefficients increase in the order : Tl(Ⅰ) < Fe(Ⅲ) < Tb(Ⅲ)∼Ce(Ⅲ) < $UO_2^{2+}$< Th(Ⅳ) and the order is interpreted in terms of the ratio of charge-to-ionic radius. The mole ratios of increment of $ClO_4^-$ ion absorption to metal ion absorption showed the same order as the distribution coefficients, which indicates that the electrostatic association between $ClO_4^-$ ion and metal ion plays a major role in the strong absorption.