• Asian Journal of Atmospheric Environment
• /
• 제6권1호
• /
• pp.23-32
• /
• 2012

The ionic composition of $PM_{2.5}$ samples was investigated by their datasets of cationic ($Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, and $Ca^{2+}$) and anionic components ($Cl^-$, $NO_3^-$, and $SO_4^{2-}$) along with relevant environmental parameters collected from an urban monitoring site in Korea at hourly intervals in 2010. The mean (and SD) annual concentration of $PM_{2.5}$ was computed as 25.3 ${\mu}g\;m^{-3}$ with the wintertime maximum. In addition, sum concentrations (neq $m^{-3}$) of five cationic species (291) were slightly lower than 3 anionic species (308). Most cations exhibited the highest seasonal values in spring, while anions showed more diversified seasonal patterns. According to PCA, five major source categories were apparent with the relative dominance of secondary inorganic aerosols (SIA). The results of our study suggest consistently that the distribution of ionic constituents in an urban area is affected by the combined effects of both natural and anthropogenic processes.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.301-306
• /
• 2004

Statement of problem. Fibronectin mediates its biological effects by binding to integrins on cell membranes through a consensus site including the Arg-Gly-Asp (RGD) sequence within tenth type III module. Purpose. The purpose of our study was to investigate the adsorption affinity of human recombinant fibronectin peptide (hFNIII 9-10) to titanium and to investigate the effect of the surrounding ionic composition on the adsorption process. Material and methods. As for evaluating the affinity of hFNIII 9-10 to Ti, titanium disks were incubated in 40, 80 and $120{\mu}g/ml$ hFNIII 9-10 solution at $37^{\circ}C$ overnight, repectively. As for evaluating the effect of surrounding ionic concentration, hFNIII 9-10 was dissolved in distilled water, phosphate buffered saline and RPMI 1640. Optical density (O.D.) was measured in ELISA reader. Results. The results were as follows; 1. The adsorption of hFNIII 9-10 showed significantly highest mean optical density (O.D.) value in $80{\mu}g/ml$. 2. The difference of ionic composition in DW, PBS and RPMI did not influence the adsorption amount of hFNIII 9-10.

• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.803-810
• /
• 2004

Water contents in fine particles at Seoul and Gosan are estimated by using a gas/particle equilibrium model, SCAPE (Simulating Composition of Atmospheric Particles at Equilibrium). Also, sensitivity of particulate inorganic ionic concentrations on the total ionic species is estimated. Water content at Gosan is more sensitive to ambient relative humidity (RH) than Seoul. At both sites water content is most sensitive to sulfate concentration among sulfate, nitrate, and ammonium. Solid salts levels and compositions are also studied.

• 공업화학
• /
• 제23권4호
• /
• pp.405-408
• /
• 2012

이성분계 이온성액체를 사용하여 다양한 모양의 이산화티타늄 입자를 수정된 졸-겔법을 이용하여 제조하였다. 합성에 사용된 이온성액체의 종류에 따라 이산화티타늄 입자는 다양한 형태를 가지고 있었다. 이는 이온성액체와 유기용매계면 사이에서 형성되는 이산화티타늄이 두 물질 사이의 상호작용에 영향을 받아 입자의 모양이 형성되기 때문이다. 제조된 입자의 광촉매 성능을 측정하기 위하여 4-chlorophenol 분해반응을 실시하였다. 그 결과 1-Octyl-3-methylimidazolium tetrafluoroborate과 1-Octyl-3-methylimidazolium tetrafluoroborate를 이용하여 합성한 $TiO_2$ 입자가 가장 우수한 광촉매 활성을 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.306-308
• /
• 2007

Poly(ethylene glycol) dimethyl ether (PEGDME)/fumed silica/ 1-methyl -3-propylimidazolium iodide (MPII)/$I_2$ mixtures were used as polymer electrolytes in solid state dye-sensitized solar cells (DSSCs). The contents of MPII were changed and the concentration of $I_2$ was fixed at 0.1 mole% with respect to the MPII. The maximum ionic conductivity was obtained at [EG]:[MPII]:[$I_2$]=10:1.5:0.15. It was supposed that the maximum of ionic conductivities would match with that of cell efficiencies, if the ionic conductivity is a rate determining step in the sol id state DSSCs. However, the maximum composition did not show the maximum solar cell performance, indicating the mismatch between ionic conductivity and cell performance. This suggests that the ionic conductivity may not be the rate controlling step in determining the cell efficiency in these experimental conditions, whereas other parameters such as the electron recombination might play an important role. Thus, we tried to modify the surface of the $TiO_2$ particles by coating a thin metal oxide such as $Al_2O_3$ or $Nb_2O_5$ layer to prevent electron recombination. As a result, the maximum of the cell efficiency was shifted to that of the ionic conductivity. The peak shifts were also attempted to be explained by the diffusion coefficient and the lifetime of electrons in the $TiO_2$ layer.

• 전기화학회지
• /
• 제16권4호
• /
• pp.198-203
• /
• 2013

본 실험에서는 MMA와 tBMA의 공중합체를 합성하고, tert-butyl 그룹의 가수분해를 선택적으로 유도하여 poly(MMA-co-MA)를 제조하였다. 또한 말단에 에폭시기를 함유한 다양한 분자량의 PEO와 MA와의 grafting-onto 커플링 반응을 통해 같은 주사슬을 가지지만 부사슬의 길이가 다른 poly(MMA-co-PEGMA)를 합성하여 조성이 이온전도도에 미치는 영향을 평가하였다. AC-impedance로 측정한 상온 이온전도도는 MMA의 몰분율이 82%에서 $5.11{\times}10^{-8}Scm^{-1}$의 값이 얻어진 반면, 48%에서는 $1.88{\times}10^{-6}Scm^{-1}$로서 많은 PEGMA에서 높게 관찰되었다. 또한 에폭시기를 함유한 PEO의 분자량에 따라 이온전도도의 차이가 발생하는데, grafting-onto 법의 입체적 장애가 원인으로 고려되었다. 한편, 합성된 poly(MMA-co-PEGMA) 고분자 전해질은 상온에서 6V까지 우수한 전기화학적 안정성을 보여주었다.

• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1292-1300
• /
• 1995

The ionic conductivity of NASICON solid electrolytes was simulated by using Monte Carlo Method (MCM). There were included two conduction paths: (1) Na1-Na2 and (2) Na1-Na2 including Na2-Na2. We assumed that mid-Na ions provde an additional driving force for Na mobile ions due to the interionic repulsion between Na1 and Na2 ions. The inflection point of vacancy availability factor, V has been shown at nearby x=2, the maximum mid-Na ions. The inflection point of vacancy availability factor, V has been shown at nearby x=2, the maximum mid-Na sites are occupied. The effective jump frequency factor, V has been shown at nearby x=2, the maximum mid-Na sites are occupied. The effective jump frequency factor, W increased rapidly with the composition at low temperature, but decreased at high temperature region. On Na1-Na2 conduction path, the minimum of charge correlation factor, fc and the maximum of $\sigma$T were appeared at x=2.0. this indicated that mid-Na ions affect on the high ionic conductivity behavior. At the whole range of NASICON composition, 1n $\sigma$T vs. 1/T* plots have been shown Arrhenius behavior but 1n (VWFc) vs. 1/T* have been shown the Arrhenius type tendency at x=2, which mid-Na is being the maximum. The results of MCM agreed with the experimental one when the chosen saddle point value was 6$\varepsilon$ : 3$\varepsilon$. Here the calculated characteristic parameter of materials, K and the phase transition temperature were -4.001$\times$103 and 178$^{\circ}C$ (1/T*=1.92, 1000/T=2.22), respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.211-214
• /
• 2001

The undesirable phase transformation of zirconium dioxide at high temperatures can be eliminated by stabilization of the cubic phase with an addition of a selected alkaline earth or rare-earth oxide. In this paper the ionic conductivity of cubic solid solutions in the stabilized ZrO$_2$ by CaO-Y$_2$O$_3$ system was examined. The higher ionic conductivity appears to be related to lower activation energy rather than to the number of oxygen vacancies dictated by composition. Those compositions of highest conductivity lie close to the cubic-monoclinic solid-solution phase boundary. Conductivity temperature data are presented that indicate a reversible order-disorder transition for Zr$_2$2-Y$_2$O$_3$cubic solid solutions containing 20 and 25 mole % $Y_2$O$_3$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.96.1-96.1
• /
• 2017

This presentation introduces anodizing science of typical valve metals of Al, Mg and Ti, based on the ionic transport through the andic oxide films in various electrolyte compositions. Depending on the electrolyte composition, metal ions and anions can migrate through the andic oxide film without its dielectric breakdown when point defects are present within the anodic oxide films under high applied electric field. On the other hand, if anodic oxide films are broken by local joule heating due to ionic migration, metal ions and anions can migrate through the broken sites and meet together to form new anodic films, known as plasma electrolytic oxidation (PEO) treatment. In this presentation, basics of conventional anodizing and PEO methods are introduced in detail, based on the ionic migration and movement mechanism through anodic oxide films by point defects and by local dielectric breakdown of anodic oxide films.

• Journal of Plant Biotechnology
• /
• 제38권2호
• /
• pp.130-136
• /
• 2011

Ions deficiency or excess remains one of the critical ground level environmental problems, affecting crop productivity. In this overview, we will discuss an increased application of proteomics technology in addressing this issue using rice (Oryza sativa L.) as a model crop plant. Proteomics analyses have revealed that rice proteome undergoes changes in the proteins composition and expression in response to several ionic stresses, including mineral nutrients (aluminum, nitrogen, and phosphorous) and heavy metals (arsenic, cadmium, and copper). Developed inventory of responsive proteins and their correlation with changes in physiological symptoms and parameters are a major step forward in: (i) better understanding the underlying mechanisms of ionic stresses-triggered responses in rice; (ii) comparative proteomics studies; and (iii) designing a novel strategy to improve crop plants.