• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.69-79
• /
• 2016

Lithium ion battery with high energy density is expanding its application area to electric automobile and electricity storage field beyond existing portable electric devices. Such expansion of an application field is demanding higher characteristic and stable long life characteristic of an anode material, the natural graphite that became commercialized in lithium ion battery. This thesis produced cathode by using natural graphite anode material, analyzed creation of the cathode SEI film created due to initial reaction by using electrolyte additives, VC (vinylene carbonate), VEC (vinyl ethylene carbonate), and FEC (fluoroethylene carbonate), and considered correlation with the accompanying electrochemical transformation. This study compared and analyzed the SEI film variation of natural graphite cathode according to the electrolyte additive with SEI that is formed at the time of initial filling and cathode of $60^{\circ}C$ life characteristic. At the time of initial filling, the profile showed changes due to the SEI formation, and SEI was formed in No-Additive in approximately 0.9 V through EVS, but for VC, VEC, and FEC, the formation reaction was created above 1 V. In $60^{\circ}C$ lifespan characteristic evaluation, the initial efficiency was highest in No-Additive and showed high contents percentage, but when cycle was progressed, the capacity maintenance rate decreased more than VC and FEC as the capacity and efficiency at the time of filling decreased, and VEC showed lowest performance in efficiency and capacity maintenance rate. Changes of SEI could not be verified through SEM, but it was identified that as the cycle of SEI ingredients was progressed through FT-IR, ingredients of Alkyl carbonate ($RCO_2Li$) affiliation of the $2850-2900cm^{-1}$ was maintained more solidly and the resistance increased as cycle was progressed through EIS, and specially, it was identified that the resistance due to No-Additive and SEI of VEC became very significant. Continuous loss of additives was verified through GC-MS, and the loss of additives from partial decomposition and remodeling of SEI formed the non-uniform surface of SEI and is judged to be the increase of resistance.

• Korean Journal of Poultry Science
• /
• v.29 no.2
• /
• pp.95-100
• /
• 2002

Two experiments were conducted to investigate the effect of taurine supplementation on lipid metabolism in laying hens. In experiment 1, 19-wk-old laying hens were given one of four taurine supplemented diets (0 (control), 0.4, 0.8, and 1.2% taurine) fur 10 weeks. Abdominal fat weight was lower in the 1.2% diet by 29.2% compared to the control. Serum concentrations of triacylglycerol and HDL-cholesterol were not different among the treatments. However, seam concentration of total cholesterol was higher by 22.4% in the 1.2% diet compared to the control. Concentration of triacylglycerol or total cholesterol in the liver were decreased by 26.1% or 26.4% and 28.2% or 26.4%, respectively in the 0.8% and 1.2% diets compared to the control. The concentration of HDL-cholesterol in liver was also lower by 33.9% in the 1.2% diet compared to the control. In experiment 2, 81-wk-old laying hens were allocated to one of three taurine supplemented diets (0 (control), 1 and 2% taurine) fur 6 weeks. Abdominal fat weight was lower by 25% in 1% taurine supplementation compared to the control. Serum concentrations of triacylglycerol, total cholesterol and HDL-cholesterol of hens fed with 1% diet were not different from those of control group. However, sew concentrations of triacylglycerol and total cholesterol were lower by 44.0% and 19.8%, respectively in the 2% diet compared to the control. Furthermore, serum concentration of HDL -cholesterol in the 2% diet was higher by 75% compared to the control. Concentrations of triacylglycerol and total cholesterol in the liver in the 2% diet were decreased in the 1% diet by 36.8 and 23%, respectively, but increased by 78.4% and 70%, respectively, compared to the control. The concentration of HDL-cholesterol in the liver was not different between the 1% diet and the control, but higher by 62.8% in the 2% diet compared to the control. These results indicated that taurine supplementation decreased the fat storage in abdominal cavity, which was accompanied by the changes in triacylglycerol and cholesterol metabolisms of laying hens.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.781-797
• /
• 2023

Recently, there has been a rapid response from mineral-demanding countries for securing critical minerals in a high tech industries. Graphite, while overwhelmingly dominated by China in production, is changing in global supply due to the exponential growth in EV battery sector, with active exploration in East Africa. Rare earth elements are essential raw materials widely used in advanced industries. Globally, there are ongoing developments in the production of REEs from three main deposit types: carbonatite, laterite, and ion-adsorption clay types. While China's production has decreased somewhat, it still maintains overwhelming dominance in this sector. Recent changes over the past few years include the rapid emergence of Myanmar and increased production in Vietnam. Nickel has been used in various chemical and metal industries for a long time, but recently, its significance in the market has been increasing, particularly in the battery sector. Worldwide, nickel deposits can be broadly classified into two types: laterite-type, which are derived from ultramafic rocks, and ultramafic hosted sulfide-type. It is predicted that the development of sulfide-type, primarily in Australia, will continue to grow, while the development of laterite-type is expected to be promoted in Indonesia. This is largely driven by the growing demand for nickel in response to the demand for lithium-ion batteries. The global lithium ores are produced in three main types: brine lake (78%), rock/mineral (19%), and clay types (3%). Rock/mineral type has a slightly higher grade compared to brine lake type, but they are less abundant. Chile, Argentina, and the United States primarily produce lithium from brine lake deposits, while Australia and China extract lithium from both brine lake and rock/mineral sources. Canada, on the other hand, exclusively produces lithium from rock/mineral type. Vanadium has traditionally been used in steel alloys, accounting for approximately 90% of its usage. However, there is a growing trend in the use for vanadium redox flow batteries, particularly for large-scale energy storage applications. The global sources of vanadium can be broadly categorized into two main types: vanadium contained in iron ore (81%) produced from mines and vanadium recovered from by-products (secondary sources, 18%). The primary source, accounting for 81%, is vanadium-iron ores, with 70% derived from vanadium slag in the steel making process and 30% from ore mined in primary sources. Intermediate vanadium oxides are manufactured from these sources. Vanadium deposits are classified into four types: vanadiferous titanomagnetite (VTM), sandstone-hosted, shale-hosted, and vanadate types. Currently, only the VTM-type ore is being produced.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.354-364
• /
• 2020

This study was conducted to examine the potential of inducing salinity stress on cylindrical paper pot tomato seedlings to inhibit overgrowth. Potassium fertilizers, sulfate of potash (K₂SO₄), muriate of potash (KCl), and monopotassium phosphate (KH₂PO₄), were prepared as two solutions of (5 and 10) dS·m^-1 salinity level, respectively, to investigate the influence on tomato (Lycopersicon esculentum Mill.) seedling growth. We also investigated the adaptability and survivability of treated tomato seedlings with high-salinity potassium (10 dS·m^-1 KCl) to harsh environmental conditions (water deficit, low temperature, and storage conditions). Repeated addition of high-salinity level KCl, K₂SO₄, or KH₂PO₄ markedly decreased the dry matter of shoot and root, leaf area, and net assimilate rates (NAR) but increased the stem diameter of seedlings. Among the three sources, the relative growth rate of plant height (RGR_H) was most sensitive to KCl addition; increasing salinity levels of KCl solution decreased the RGR_H of seedlings. The compactness, which directly reflects the stocky growth index, increased in KCl or KH₂PO₄ treatments. After a week's water deficit, severely wilted seedlings were observed in control seedlings (untreated with KCl), but no wilted seedlings were observed in the KCl treated seedlings, and the relative water content (RWC) of the untreated seedlings significantly decreased by 23 %, while that of the pretreated seedlings only decreased by 8 %. The increase in ion leakage of KCl treated seedlings at low temperatures was less than that of untreated seedlings. Furthermore, there was far lower damage proportion on pretreated seedlings at (9, 12, and 15)℃ storage temperatures after 20 days, compared with on unpretreated seedlings. Our results suggest that high-salinity potassium fertilizer, especially KCl, is effective in preventing tomato seedling overgrowth, while it also improves tolerance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.545-552
• /
• 1998

This study was undertaken to clarify the effects of electrical stimulation on the biochemical properties of plaice sarcoplasmic reticulum and myofibrils at early period of death. The plaices were electrically stimulated (110V/60 Hz) In sea water bath for 15, 35, and 60 seconds, and killed instantly by spiking at the head. Killed samples were investigated for the changes in $Ca^{2+}$-ATPase activity of FSR (fragmented sarcoplasmic reticulum), LSR (light SR), HSR (heavy SR), and SDS-PAGE pattern of FSR. $Ca^{2+}$-ATPase activity of FSR increased until $45^{\circ}C$ and inactivated over $50^{\circ}C$. $Ca^{2+}$-ATPase activity of FSR remarkably decreased according to the duration of electrical stimulation. Myofibrillar $Mg^{2+}$-ATPase activity of electrically stimulated plaices in the presence of $Ca^{2+}$ was higher than that of sample instantly killed by spiking. $Mg^{2+}$-ATPase activity of myofibrils increased by electrical stimulation and the activity decreased during storage at $5^{\circ}C$. Myofibrillar $Mg^{2+}$-ATPase activity in sample killed by spiking was not affected by $Ca^{2+}$ ion. Myofibrillar $Mg^{2+}$-ATPase activity of electrically stimulated sample in the absen-re of $Ca^{2+}$ decreased during storage at $5^{\circ}C$, whit $Mg^{2+}$-ATPase activity in unstimulated sample did not show any change. $Ca^{2+}$-sensitivity of myofibrils showed no differences between electrically stimulated sample and sample killed by spiking, and the was no change during at $5^{\circ}C$.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.5
• /
• pp.334-341
• /
• 2001

Purpose: Ascorbic acid us known to act as an antioxidant. Therefore, it can be used in increasing the efficiency of radiochemical labeling of Technetium-99m setamibi by inhibition of oxidation of $Sn^{2+}$ at low concentration. We intended to estimate the efficiency of radiochemical labeling and the stability of the newly formed formulation when ascorbic acid was added to a commercial kit. Materials and Methods: Synthesis of sestamibi was performed according to Dong-A's patent procedure (No.10-2001-0012877). First, we undertook a study to evaluate the efficiency of radiochemical labeling of sestamibi containing ascorbic acid. The stability of the vials was assessed using either $7.5{\mu}g\;or\;75{\mu}g$ of ascorbic acid, added to commercial vials under the accelerated condition(Temp : $40^{\circ}C{\pm}2^{\circ}C$, Relative humidity : $75{\pm}5%$). Results: Sestamibi was synthesized in overall 35-40% yield over 5 steps from a commercially available methallyl chloride as a starling material. When ascorbic acid was added, the efficiency of radiochemical labeling was maintained compared to the vial with no ascorbic acid. The accelerated test showed that the addition of ascorbic acid inhibited the oxidation of $Sn^{2+}$ ion by antioxidation mechanism. Also, the efficiency of radiochemical labeling of this vial after 9 months was nearly the same as the starting point. Therefore, the storage period of the kit is likely to be extended. Taken together, it suggests that the addition of ascorbic acid as a stabilizer is desirable. Conclusion: To increase the stability of a sestamibi cold kit, it is desirable to add ascorbic acid as a stabilizer to the commercial formulation.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.211-217
• /
• 1997

The physical and chemical stability of anthocyanins from a Korean pigmented rice variety was investigated at various conditions of pH, temperature, metal ion, sugar, organic acid and light. The anthocyanin pigments were relatively stable with half-lives of 36 days (pH 2.0) and 17 days (pH 3.0), while they were decomposed in a day at neutral and basic pH of 7.0 and 9.0 at $25^{\circ}C$. The anthocyanins also showed high thermal stability at pH 3.0; the half-lives were 7.4 hr, 23.6 hr and 96.3 hr at $95^{\circ}C,\;75^{\circ}C\;and\;50^{\circ}$, respectively. Addition of di- and tri-valent metal ions at pH 3.0 resulted in the increase of color intensity and stability throughout 21 days of storage periods at $25^{\circ}C$. Most sugars added accelerated the degradation of anthocyanin pigments, so that fructose showed the greatest degradation effect on the pigments. Addition of citric acid at pH 3.0 increased stability of anthocyanins, while tartaric acid decreased stability. The anthocyanins were very sensitive on light irradiation with a degradation half-life of 14 hr under 20,000 lux-light dosage at pH 3.0.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1398-1406
• /
• 2004

To develop the new type of salt-fermented seafoods, the salt-fermented oysters in olive oil (product SO) were manufactured, and food components and quality characteristics of product SO were examined. The optimum processing condition for product SO is as follows. The raw oyster with no shell was washed off with 3% saline solution. Then dewatered, and dipped in the brine-salting solution made up with saturated saline solution and oyster sauce (2 : 1 v/v) mixture added 1% sodium erythorbic acid and 0.2% polyphosphate. After salt-fermentation it ripened by brine salting at 5$\pm$1$^{\circ}C$ for 15 days. Then dried at 15$^{\circ}C$ for 4 hours with cool-air, and packed in No. 3B hexahedron type can. Finally, poured with olive oil and seamed it by double-seamer. The moisture, crude protein, crude ash and volatile basic nitrogen contents of the product SO were 61.6%, 12.0%, 16.3% and 34.3 mg/100 g, respectively. In taste-active components of the product SO, total amount of free amino acids is 2,335.4 mg/100 g and it has increased by 50% overall during salt-fermentation 15 day. Taurine, glutamic acid, proline, glycine, alanine, $\beta$-alanine and lysine were detected as principal free amino acids. The contents of inorganic ions were rich in Na and K ion, while the amounts of nucleotide and its related compounds and other bases except betaine were small. From the results of this research, the product SO had a superior organoleptic qualities compared with conventional oyster product, and could be reserved in good conditions for storage 90 days at room temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.1
• /
• pp.31-41
• /
• 1971

The present study was directed to define the degradation pattern of the nucleotides and their related compounds in the muscle of anchovy during drying. Three kinds of samples, fresh, sun dried and boiled-and-dried anchovy, were prepared and the contents of nucleotides and related compounds of samples were determined by ion exchange chromatography. The results obtained are summarized as follows: Almost all of ATP disappeared in both muscle of sun dried and boiled-and-dried anchovy, although the initial content of ATP in fresh muscle was very low ($1.8{\mu}moles/g$, dry basis). But the remainning amount of ADP was considerably high while the other nucleotide almost entirely disappeared. This suggested that the residual ADP is responsible to the 'bound nucleotide' of myofibrils. In general, AMP content was comparatively lower than that of other nucleotides. Among three samples, the boiled-and-dried sample showed relatively higher AMP value than others. The amount of IMP remained in muscle remarkably varied between the boiled-and-dried anchovy and sun dried anchovy, the former's value being sixteen times higher than that of latter. In the contents of inosine and hypoxanthine, the sun dried anchovy marked an exceedingly high value equivalent to 2.7 times of the boiled-and-dried anchovy. In comparison of the ratio of inosine and hypoxanthine, hypoxanthine was accumulating in boiled-and-dried anchovy whereas inosine was in the sun-dried anchovy. Eighty three percent of total nucleotides in the fresh anchovy retained in the boiled-and-dried anchovy and IMP ratio in total nucleotides was $73\%$. On the contrary, the sun dried anchovy showed barely $10\%$ of retention rate and IMP ratio was only $38\%$. Considered from the flavor quality of dried anchovy, so far as concerned IMP content, it may be said that the boiled-and-drying method is more favorable process for dried product of anchovy than the sun-drying method.