• The Korean Journal of Physiology
• /
• 제21권2호
• /
• pp.273-282
• /
• 1987

가토 신피질에서 분리한 brush border membrane (BBM)과 basolateral membrane vesicle (BLM)에서 유기 음이온인 p-aminohippuric acid (PAH)와 유기 양이온인 tetraethylammonium (TEA)의 이동에 대한 동력학적 분석을 하였다. BLM에서 PAH에 대한 Km과 Vmax값은 각각 $0.34{\pm}0.02\;mM$과 $0.22{\pm}0.07\;nmol/mg\;protein/20s$였으며 BBM에서 각 값은 $8.46{\pm}0.57\;mM$과 $4.43{\pm}0.40\;nmol/mg\;protein/20s$였다. BLM에서 용액내 Na의 제거는 PAH에 대한 Km 값에는 영향없이 Vmax 값을 변화시켰다. BBM에서 TEA이동에 대한 Km과 Vmax 값은 각각 $0.55{\pm}0.15\;mM$과 $1.04{\pm}0.23\;nmol/mg\;protein/20s$였으며 BLM에서 각 값은 $0.46{\pm}0.04\;mM$과 $0.61{\pm}0.06\;nmol/mg\;protein/20s$였다. BLM에서 측정한 유기 이온들의 이동에 대한 Km 값이 신절편이나 분리된 tubule에서 보고된 값과 일치함을 보였으며 이러한 결과는 신세뇨관 세포막을 통한 유기 이온들의 이동 특성이 membrane vesicle을 분리하는 과정에서 변하지 않았음을 가르킨다.

• 멤브레인
• /
• 제1권1호
• /
• pp.44-54
• /
• 1991

가교제의 양과 희석용매의 종류(톨루엔, 시클로헥산, 시클로-핵산올) 및 희석용매의 비에 따라 양이온 교환막인 술폰화 폴리스티렌-디비닐벤젠 공중합체 분리막을 합성한 후 특성화하고, pH와 초기농도의 변화에 따른 유기산 투과량의 변화를 고찰하였다. 제조한 막은 가교제의 양이 감소할수록, 단량체 용액의 희석정도가 클수록 함수율과 이온교환용량은 증가하는 경향을 보였다. 희석용매로는 시클로헥산올을 사용한 막이 다른 용매를 사용한 막에 비해 더욱 다공질이고 큰 함수율과 이온교환용량을 보였다. 유기산의 투과실험에서는 수용액상의 포름산, 아세트산과 같은 카르복시산은 pH가 pKa보다 낮아질수록 투과량이 증가하였으며, 아미노산인 L-알라닌은 등전점 pH에서 투과량의 최소치를 나태내었다. 한편, 모든 유기산에 대하여 초기농도 증가에 따른 플럭스의 변화는 전형적인 포화속도론적 경향을 나타내었다.

• Journal of Electrochemical Science and Technology
• /
• 제5권2호
• /
• pp.37-44
• /
• 2014

The $Li-O_2$ battery has been attracting much attention recently, due to its very high theoretical capacity compared with Li-ion chemistries. Nevertheless, several studies within the last few years revealed that Li-ion derived electrolytes based on alkyl carbonate solvents, which have been commonly used in the last 27 years, are irreversibly consumed at the $O_2$ electrode. Accordingly, more stable electrolytes are required capable to operate with both the Li metal anode and the $O_2$ cathode. Thus, due to their favorable properties such as non volatility, chemical inertia, and favorable behavior toward the Li metal electrode, ionic liquid-based electrolytes have gathered increasing attention from the scientific community for its application in $Li-O_2$ batteries. However, the scale-up of Li-$O_2$ technology to real application requires solving the mass transport limitation, especially for supplying oxygen to the cathode. Hence, the 'LABOHR' project proposes the introduction of a flooded cathode configuration and the circulation of the electrolyte, which is then used as an oxygen carrier from an external $O_2$ harvesting device to the cathode for freeing the system from diffusion limitation.

• 멤브레인
• /
• 제16권3호
• /
• pp.167-181
• /
• 2006

전기탈이온 시스템은 전기투석과 이온교환수지법의 혼합 공정으로서 외부전기장 하에서의 이온교환매개체를 통해 이온이 제거되어 고순수를 제조할 수 있도록 고안된 장치이다. 전기탈이온 장치는 이온의 제거 메커니즘과 이온교환 매개체의 전기적 재생 메커니즘으로 설명되며 이를 이용하여 희석조의 성능을 최적화하는 것이 시스템의 효과적인 사용을 위해서 필요하다. 또한 전기탈이온 장치의 다양한 분야에서의 적용을 위해서는 스택구성을 다양하게 변경하여 적용가능성을 판단하는 것이 필요하다. 이를 효과적으로 달성하기 위해서는 기존에 제시되었던 다양한 시스템 특성분석법과 이동현상 관련 수식들을 이해하여 전기탈이온 스택구성에 적용하는 것이 무엇보다 중요하다. 본 총설에서는 전기탈이온 장치의 최적화를 위해 필요한 기초 이론들과 방법들에 대해서 살펴보고 현재의 연구동향에 대해서 고찰하여 분리공정으로서의 이해를 높이고자 하였다.

• 자원환경지질
• /
• 제32권1호
• /
• pp.43-51
• /
• 1999

In order to remediate hazardous waste site, a process of electrokinetically purging chemicals from saturated soil is examined by laboratory experiments. Electrokinetic soil remediation is one of the most promising soil decontamination processes that habe igh removal efficiency and time-effectiveness in low-permeability soils such as clay. Being combined with several mechanisms-electromigration, elec troosmosis, diffusion and electrolysis of water, electrokinetic soil processing can remove non-polar organics as well as ionic contaminants. The objectives of this study are; 1) the exploration of the feasibility of electrokinetic soil processing on the removal of heavy metals, 2) the investigation of applicability to the tailing-soils in aban doned mining area, 3) the examination of effects of soil pH and conductivity on the transport phenomena of elements in soils, and 4) the investigation of the applicability of the ionexchange membrance to the efficient collection of heavy metals removed from contaminated soils. With the result of this study, it is suggested that the removal efficiency is significantly influenced by applied voltage & current, type of purging solutions, soil pH, permeability and zeta potentials of soil. Although further study should be needed, it is possible to collect removed heavy metals with ion-exchange membrance in cathode compartment.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.89-92
• /
• 1998

1. Introduction : Among many azeotropic compounds, pyridine which forms an azeotropic mixture with three moles of water boiling at 92-93$\circ$C is very useful synthetic intermediate in laboratory and industry. With conventional separation method, the dehydration of pyridine aqueous solution is difficult and requires strong drying chemicals. To overcome these difficulties, several researchers have investigated on the separation of pyridine from aqueous solution through polymer membranes. Kujawski reported several ion-exchang membranes containing carboxylic and sulfonic fuctional group for dehydration of aqueous pyridine solution [1]. We have applied the idea of activation of water tranport through ion-dipole interactions between polymer membrane and aclueous feed. Our previous studies reported on the in-situ complex membrane to separate water from aqueous pyridine solution based on simple acid'-base theory [2, 3]. Water transport was enhanced through in-situ complex formation between the , acid moiety in the membrane and the incoming pyridine moiety in the feed.

• 멤브레인
• /
• 제26권2호
• /
• pp.152-158
• /
• 2016

클로알칼리(CA) 멤브레인 셀은 대표적인 염수전해 시스템으로서 가성소다와 염소를 생산하는 염수전기분해 프로세스이다. CA 멤브레인 프로세스는 타 공정에 비해 낮은 에너지 소모량을 가져 CA산업에서 가장 선호되는 공정이다. CA프로세스에 사용되는 과불소계 술폰화 이오노머막은 CA프로세스의 핵심구성 요소이며, 양이온을 선택적으로 이동시키는 역할 및 배리어적인 역할을 제공한다. 하지만, CA 구동을 위해 충족되어야 하는 요소들에 대한 정보가 제한적이기 때문에 알맞은 CA분리막 적용을 위한 제품 간의 연구가 필요하다. 본 연구에서는 실제 셀 구동을 바탕으로 하여 상용 고불소계 분리막의 이온전도경향 및 전기화학적 성능 등을 평가하였다.

• Computers and Concrete
• /
• 제15권3호
• /
• pp.461-471
• /
• 2015

The permeability is the most direct indicator to reflect the durability of concrete, and the testing methods based on external electric field can be used to evaluate concrete permeability rapidly. This study aims to use an experiment method to accurately predict the permeability of concrete box beam during service. The ion migration experiments and concrete surface resistivity are measured to evaluate permeability of five concrete box beams, and the relations between these results in service concrete and electric flux after 6 hours by ASTM C1202 in the laboratory are analyzed. The chloride diffusion coefficient of concrete, concrete surface resistivity and concrete 6 hours charge have good correlation relationship, which denote that the chloride diffusion coefficient and the surface resistivity of concrete are effective for evaluating the durability of concrete structures. The chloride diffusion coefficient of concrete is directly evaluated permeability of concrete box beam in service and may be used to predict the service life, which is fit to engineering applications and the concrete box beam is non-destructive. The concrete surface resistivity is easier available than the chloride diffusion coefficient, but it is directly not used to calculate the service life. Therefore the mathematical relation of the concrete surface resistivity and the concrete chloride diffusion coefficient need to be found, which the service life of reinforced concrete is obtained by the concrete surface resistivity.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.869-876
• /
• 2018

The force of a direct current (DC) electromagnetic pump used to transport liquid lithium was analyzed to optimize its geometrical and electrical parameters by numerical simulation. In a heavy-ion accelerator, which is being developed in Korea, a liquid lithium film is utilized for its high charge-stripping efficiency for heavy ions of uranium. A DC electromagnetic pump with a flow rate of $6cm^3/s$ and a developed pressure of 1.5 MPa at a temperature of $200^{\circ}C$ was required to circulate the liquid lithium to form liquid lithium films. The current and magnetic flux densities in the flow gap, where a $Sm_2Co_{17}$ permanent magnet was used to generate a magnetic field, were analyzed for the electromagnetic force distribution generated in the pump. The pressure developed by the Lorentz force on the electromagnetic force was calculated by considering the electromotive force and hydraulic pressure drop in the narrow flow channel. The opposite force at the end part due to the magnetic flux density in the opposite direction depended on the pump geometrical parameters such as the pump duct length and width that defines the rectangular channels in the nonhomogeneous distributions of the current and magnetic fields.

• 한국동물학회지
• /
• 제30권2호
• /
• pp.117-139
• /
• 1987

The present experiments were carried out to investigate the mode of cAMP regulation of cumulus expansion in pig. Intracellular level of cAMP in the cumulus cells was modulated by culturing porcine cumulus oocyte complexes (COC's) with forskolin, an adenylate cyclase stimulator and 3-isobutyl-1-methylxanthine (IBMX), a phosphodiesterase inhibitor. The role of calcium in the hormone induced cumulus expansion process was also studied. Forskolin in the medium stimulated cumulus expansion from the concentration of 0.01 $\mu$M and induced full expansion at l-10 $\mu$M In contrast, IBMX in the medium (20-180 $\mu$M) failed to induce the expansion. Verapamil, a calcium ion transport blocker, suppressed follicle stimulating hormone(FSH)-induced cumulus expansion in a dose dependent fashion (0.002-0. 2 mM) when the COC's were exposed to the drugs during culture period (32 hr). But verapamil did not interfere with the triggering action of FSH during early four hours of culture period. The data presented here showed that adenylate cyclase in the porcine cumulus cells may play a key role in the regulation of the intracellular cAMP level and calcium ion may be involved in the later period of cumulus expansion process.