• Title/Summary/Keyword: Ion Size

검색결과 1,130건 처리시간 0.031초

Development of GaInP-AlGaInP High Power Red Laser Diodes

  • 김호경;김창주;최재혁;배성주;송근만;신찬수;고철기
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.118-119
    • /
    • 2013
  • High power, short wavelength red laser diodes (LDs) have attracted significant interests in a variety of fields due to their advantages in terms of reliability, compactness and cost. The higher brightness for human eyes is required, the shorter wavelength like 630 nm is necessary with higher output power. In this respect, LDs are promising as alternative candidates of gas or dye lasers for such applications due to their small size, high optical/electrical power conversion efficiency, robustness and so on. The crystalline quality of GaInP-AlGaInP multiple quantum wells (MQWs) and AlInP cladding layers is a crucial part in the device performance of GaInP red LDs. Here, we first investigated the effect of Si diffusion on the optical properties of GaInP-AlGaInP MQWs grown with different growth temperatures. Secondary ion mass spectroscopy (SIMS) measurements revealed that both the Mg and Si diffusion into MQW active region was significant. To reduce such diffusion, we employed undoped Mg and Si diffusion barrier and could improve the properties.Without both Mg and Si diffusion barriers, no lasing emission was observed. However, lasing emission was observed clearly for the red LDs with both Mg and Si diffusion barriers. We then investigated the temperature dependent optical properties of MQW layers grown with different well thicknesses (6, 8 and 10 nm). When the well thickness was 10 nm, the better crystalline quality was obtained. However, the observed LD performances were similar, probably due to the defects and impurities in the AlGaInP layer. Further investigation with the detailed analyses will be presented later.

  • PDF

침전반응법으로 합성한 수산아파타이트 분말의 중금속 흡착 특성 및 폐수중의 유해 금속 제거제로서의 유용성 (The Heavy Metal Adsorption Properties of Hydroxyapatite Powders Synthesized by Precipitation Reaction Method and Its Applicability for the Removal Agents of Noxious Metallic Ions in Waste Water)

  • 이무성;나춘기;이미숙;김옥배;김문영
    • 자원환경지질
    • /
    • 제28권3호
    • /
    • pp.231-241
    • /
    • 1995
  • It is well known that hydroxyapatite [$Ca_{10}(PO_4)_6(OH)_2$] have an exchangeability for various heavy metal ions in aqueous solution. To evalute the feasibility of employing the synthetic hydroxyapatites as an eliminatable exchanger for environmentally noxious caions in waste water, the adsorption properties, the removal capacities and the selectivity of the apatites for various cations were investigated in more detailed. The heavy metal cations have been exchanged in calcium part of hydroxyapatite. The order of the degree of amount exchanged of the investigated cations is $Pb^{2+}>Cd^{2+}>Zn^{2+}>Ba^{2+}$. The molar ratios between released $Cd^{2+}$ ions and remeved divalent metal cations in the reacted solution with hydroxyapatite are roughly close to an integer 1.0, suggesting that an ion-exchange reaction could have played a major role in the removal of heavy metals rather then an adsorption effect. The exchangeability of the hydroxyapatite powder of Ca/P molar ratio 1.67, which have specipic surface area of $104.5m^2g^{-1}$, appeared to be better then $237.6{\mu}g$ per g for $Pb^{2+}$ ions. The removal capacity of the heavy metal ions varies directly as particle size of hydroxyapatites. All evidences obtained indicate that the synthesized hydroxyapatite powders by precipitation reaction method can be employed as an effective cation exchanger for eliminating noxious ions in waste water even in some improvemental.

  • PDF

A Novel Thrombolytic and Anticoagulant Serine Protease from Polychaeta, Diopatra sugokai

  • Kim, Hye Jin;Shim, Kyou Hee;Yeon, Seung Ju;Shin, Hwa Sung
    • Journal of Microbiology and Biotechnology
    • /
    • 제28권2호
    • /
    • pp.275-283
    • /
    • 2018
  • Ischemic stroke can result from blockage of blood vessels, forming fibrin clots in the body and causing irreparable brain damage. Remedial thrombolytic agents or anticoagulants have been studied; however, because the FDA-approved tissue plasminogen activator has low efficacy and side effects, it is necessary to develop safer and more effective treatment candidates. This study aimed at assessing the fibrinolytic and anticoagulation features of a novel serine protease extracted and purified from Diopatra sugokai, a polychaeta that inhabits tidal flats. The purified serine protease was obtained through ammonium sulfate precipitation, affinity chromatography, and ion-exchange chromatography. Its molecular size was identified via SDS-PAGE. To characterize its enzymatic activities, the protease activity at various pH and temperatures, and in the presence of various inhibitors, was measured via azocasein assay. Its fibrinolytic activity and anticoagulant effect were assessed by fibrin zymography, fibrin plate assay, and fibrinogenolytic activity assays. The novel 38 kDa serine protease had strong indirect thrombolytic activity rather than direct activity over broad pH (4-10) and temperature ($37^{\circ}C-70^{\circ}C$) ranges. In addition, the novel serine protease exhibited anticoagulant activity by degrading the ${\alpha}$-, ${\beta}$-, and ${\gamma}$-chains of fibrinogen. In addition, it did not produce cytotoxicity in endothelial cells. Therefore, this newly isolated serine protease is worthy of further investigation as a novel alkaline serine protease for thrombolytic therapy against brain ischemia.

이가 양이온 금속 친환 및 유기 첨가제를 이용하여 분무열분해법으로 제조된 Y2O3:Eu3+ 적색 형광체의 휘도 개선 (Photoluminescence Enhancement of Y2O3:Eu3+ Red Phosphor Prepared by Spray Pyrolysis using Aliovalent Cation Substitution and Organic Additives)

  • 민병호;정경열
    • 한국분말재료학회지
    • /
    • 제27권2호
    • /
    • pp.146-153
    • /
    • 2020
  • The co-doping effect of aliovalent metal ions such as Mg2+, Ca2+, Sr2+, Ba2+, and Zn2+ on the photoluminescence of the Y2O3:Eu3+ red phosphor, prepared by spray pyrolysis, is analyzed. Mg2+ metal doping is found to be helpful for enhancing the luminescence of Y2O3:Eu3+. When comparing the luminescence intensity at the optimum doping level of each Mg2+ ion, the emission enhancement shows the order of Zn2+ ≈ Ba2+ > Ca2+ > Sr3+ > Mg2+. The highest emission occurs when doping approximately 1.3% Zn2+, which is approximately 127% of the luminescence intensity of pure Y2O3:Eu3+. The highest emission was about 127% of the luminescence intensity of pure Y2O3:Eu3+ when doping about 1.3% Zn2+. It is determined that the reason (Y, M)2O3:Eu3+ has improved luminescence compared to that of Y2O3:Eu3+ is because the crystallinity of the matrix is improved and the non-luminous defects are reduced, even though local lattice strain is formed by the doping of aliovalent metal. Further improvement of the luminescence is achieved while reducing the particle size by using Li2CO3 as a flux with organic additives.

광화학 환원방법을 이용한 Pt@TiO2 나노 복합체 합성 (Synthesis of Pt@TiO2 Nano-composite via Photochemical Reduction Method)

  • 김지영;변종민;김진우;김영도
    • 한국분말재료학회지
    • /
    • 제21권2호
    • /
    • pp.119-123
    • /
    • 2014
  • Pt has been widely used as catalyst for fuel cell and exhausted gas clean systems due to its high catalytic activity. Recently, there have been researches on fabricating composite materials of Pt as a method of reducing the amount of Pt due to its high price. One of the approaches for saving Pt used as catalyst is a core shell structure consisting of Pt layer on the core of the non-noble metal. In this study, the synthesis of Pt shell was conducted on the surface of $TiO_2$ particle, a non-noble material, by applying ultraviolet (UV) irradiation. Anatase $TiO_2$ particles with the average size of 20~30 nm were immersed in the ethanol dissolved with Pt precursor of $H_2PtCl_6{\cdot}6H_2O$ and exposed to UV irradiation with the wavelength of 365 nm. It was confirmed that Pt nano-particles were formed on the surface of $TiO_2$ particles by photochemical reduction of Pt ion from the solution. The morphology of the synthesized Pt@$TiO_2$ nano-composite was examined by TEM (Transmission Electron Microscopy).

황해상 덕적도의 대기 에어로졸 특성 (Aerosol Characteristics at Tokchok Island in the Yellow Sea)

  • 이승복;배귀남;김용표;진현철;윤용석;문길주
    • 한국대기환경학회지
    • /
    • 제18권4호
    • /
    • pp.305-316
    • /
    • 2002
  • Various air pollutants were measured at Tokchok Island in the Yellow Sea that is about 50 km distant from Incheon since April 1999. This study was undertaken to help understanding the level of air pollution and its distribution characteristics over the Yellow Sea. The geographical characteristics of the air pollution monitoring station and emission inventories of Tokchok Island are introduced. The mass concentrations and chemical compositions of TSP and P $M_{2.5}$ measured until March 2000 are discussed in this paper. The overall average mass concentrations are about 37.2 $\mu\textrm{g}$/㎥ for TSP and 18.7 $\mu\textrm{g}$/㎥ for P $M_{2.5}$ , respectively, which are similar to or a little lower than the values observed in other background sites at Kangwha and Taean. However, they are much lower than those observed at Qingdao in China. The low mass concentration and major anthropogenic ion concentrations in aerosols collected at Tokchok Island show that local sources are not dominant at Tokchok Island. The estimated average fractions of anthropogenic non-sea-salt sulfate to the total sulfate concentration of TSP and P $M_{2.5}$ are greater than 80% for both sizes. It hence suggests that the sulfate be mainly affected by anthropogenic sources. If we consider the average mass ratio of P $M_{2.5}$ to TSP, the mass fractions of anthropogenic species to P $M_{2.5}$ , and the molar ratio of nss S $O_4$$^{2-}$ to total N $O_{3-}$, it may be possible to infer that a part of anthropogenic species measured at Tokchok Island be transported from China. The characteristics of neutralization of nss S $O_4$$^{2-}$ and the particle size of major ions are also discussed.

어류 알로부터 Protease Inhibitors의 크로마토그래피법에 의한 분획 (Chromatographic Fractionation of Protease Inhibitors from Fish Eggs)

  • 김진수;김기현;김현정;김민지;박성환;이현지;허민수
    • 한국수산과학회지
    • /
    • 제46권4호
    • /
    • pp.351-358
    • /
    • 2013
  • A protease inhibitor from fish eggs was fractionated using chromatographic methods. The fractionation efficiency was evaluated in terms of specific inhibitory activity (SIA, U/mg), purity (fold), total inhibitory activity (TIA, U), and recovery (%). The protease inhibitor (PI) from egg extracts of skipjack tuna (ST Katsuwonus pelamis), yellowfin tuna (YT Thunnus albacares) and Alaska pollock (AP Theragra chalcogramma) was fractionated using Sephadex G-50 gel filtration and DEAE-Sepharose CL-6B anion exchange chromatography based on protein size exclusion and net charge, respectively. Fractions exhibiting strong inhibitory activity were contained in the 30-50 kDa fraction on gel filtration and in the range of 0.4-0.7 M NaCl gradient fraction on anion exchange chromatography. The respective TIA and percent recovery of the fraction obtained with gel filtration toward trypsin and $N{\alpha}$-benzoyl-L-arginine-p-nitroanilide (BAPNA) were 2,758.7 U and 29.6% for ST, 1,005.5 U and 25.6% for YT, and 1,267.5 U and 26.0% for AP. Gel filtration chromatography was more effective at fractionating PI than using ion exchange chromatography. These results suggest that fish eggs act as serine protease inhibitors and might be useful for protease inhibition in foodstuffs.

무산소상태에서 $FeCl_{3}$로 촉진된 Thiobarbituric Acid 반응을 이용한 혈청중 TBA 반응물의 새로운 정량법 (A New Microassay for the Determination of Serum TBA (Thiobarbituric Acid) Value Enhanced by $FeCl_{3}$ under Anaerobic Condition)

  • 이정원;모수미;이태녕
    • Journal of Nutrition and Health
    • /
    • 제17권1호
    • /
    • pp.31-40
    • /
    • 1984
  • 혐기적 조건밑에서 $FeCl_{3}$에 의해 촉진된 TBA 반응을 이용하여 혈청중 과산화물 측정을 위한 새로운미량 분석법을 설정하였다. 즉. 혈청단백침전물이 현탁된 TBA반응흔합액에 혈청 $10{\mu}l$$1.0{\mu}mole$$FeCl_{3}$를 첨가한 다음 질소기류밑에서 50분간 끊는 물에 중탕한다. 이 분석법의 반응 예민도는 현행 일반 TBA법보다 40여배나 증대되었으며 따라서 미량의 시료$(10{\sim}20{\mu}l)$로도 TBA반응생성물의 농도 측정이 비색법으로도 가능하였다. 그리고 TBA반응생성물의 butanol 추출액을 $(NH_{4})_{2}SO_{4}$염석으로 부분말수시킴으로써 예민성 및 재현성이 개선될 수 있었다. 이 분석법을 이용하여 측정한 건강인들의 혈청 TBA같은 높은 연령군일수록 증가하는 경향을 보였다.

  • PDF

Application of Pulsed Chemical Vapor Deposited Tungsten Thin Film as a Nucleation Layer for Ultrahigh Aspect Ratio Tungsten-Plug Fill Process

  • Jang, Byeonghyeon;Kim, Soo-Hyun
    • 한국재료학회지
    • /
    • 제26권9호
    • /
    • pp.486-492
    • /
    • 2016
  • Tungsten (W) thin film was deposited at $400^{\circ}C$ using pulsed chemical vapor deposition (pulsed CVD); film was then evaluated as a nucleation layer for W-plug deposition at the contact, with an ultrahigh aspect ratio of about 14~15 (top opening diameter: 240~250 nm, bottom diameter: 98~100 nm) for dynamic random access memory. The deposition stage of pulsed CVD has four steps resulting in one deposition cycle: (1) Reaction of $WF_6$ with $SiH_4$. (2) Inert gas purge. (3) $SiH_4$ exposure without $WF_6$ supply. (4) Inert gas purge while conventional CVD consists of the continuous reaction of $WF_6$ and $SiH_4$. The pulsed CVD-W film showed better conformality at contacts compared to that of conventional CVD-W nucleation layer. It was found that resistivities of films deposited by pulsed CVD were closely related with the phases formed and with the microstructure, as characterized by the grain size. A lower contact resistance was obtained by using pulsed CVD-W film as a nucleation layer compared to that of the conventional CVD-W nucleation layer, even though the former has a higher resistivity (${\sim}100{\mu}{\Omega}-cm$) than that of the latter (${\sim}25{\mu}{\Omega}-cm$). The plan-view scanning electron microscopy images after focused ion beam milling showed that the lower contact resistance of the pulsed CVD-W based W-plug fill scheme was mainly due to its better plug filling capability.

Simulation of an X-ray Fresnel Zone Plate with Nonideal Factors

  • Chen, Jie;Fan, Quanping;Wang, Junhua;Yuan, Dengpeng;Wei, Lai;Zhang, Qiangqiang;Liao, Junsheng;Xu, Min
    • Current Optics and Photonics
    • /
    • 제4권1호
    • /
    • pp.9-15
    • /
    • 2020
  • Fresnel zone plates have been widely used in many applications, such as x-ray telescopes, microfluorescence, and microimaging. To obtain an x-ray Fresnel zone plate, many fabrication methods, such as electron-beam etching, ion-beam etching and chemical etching, have been developed. Fresnel zone plates fabricated by these methods will inevitably lead to some nonideal factors, which have an impact on the focusing characteristics of the zone plate. In this paper, the influences of these nonideal factors on the focusing characteristics of the zone plate are studied systematically, by numerical simulations based on scalar diffraction theory. The influence of the thickness of a Fresnel zone plate on the absolute focusing efficiency is calculated for a given incident x-ray's wavelength. The diffraction efficiency and size of the focal spot are calculated for different incline angles of the groove. The simulations of zone plates without struts, with regular struts, and with random struts are carried out, to study the effects of struts on the focusing characteristics of a zone plate. When a Fresnel zone plate is used to focus an ultrashort x-ray pulse, the effect of zone-plate structure on the final pulse duration is also discussed.