• 멤브레인
• /
• 제12권3호
• /
• pp.143-150
• /
• 2002

전기투석은 이온성 물질을 분리하고 농축하는데 안정하고 효과적인 공정으로 알려져 있다. 그러나 전기투석 공정은 고가의 이온교환막 때문에 실제 공정에 적용하는데 많은 제한을 받아오고 있다. 따라서 전기 투석공정의 운전 전류밀도를 가능한 높게 공급함으로써 이온교환막의 단면적당 flux를 증가시켜 주어야 한다. 그러나 실제 공정의 운전에 있어서 운전 전류밀도는 이온교환막 표면에서의 농도분극 현상으로 제한을 받게 된다. 본 총설에서는 이온교환막을 통한 이온의 이동현상을 설명하고 전류-전압 곡선을 이용한 막특성 분석을 소개하였다. 또한 한계전류밀도 전후의 전류 영역에서 농도분극 현상과 동반하는 전기대류(Electroconvection), 물 분해 현상 등에 대한 최근 연구결과를 정리하였다.

• Journal of Microbiology and Biotechnology
• /
• 제26권7호
• /
• pp.1182-1189
• /
• 2016

Lactobacillus brevis ATCC 14869 exhibited a carbon catabolite derepressed phenotype that has ability to consume fermentable sugars simultaneously with glucose. To evaluate this unusual phenotype under harsh conditions during fermentation, the effects of lactic acid and hydrogen ion concentrations on L. brevis ATCC 14869 were examined. Kinetic equations describing the relationship between specific cell growth rate and lactic acid or hydrogen ion concentration were deduced empirically. The change of substrate utilization and product formation according to lactic acid and hydrogen ion concentration in the media were quantitatively described. Although the simultaneous utilization has been observed regardless of hydrogen ion or lactic acid concentration, the preference of substrates and the formation of two-carbon products were changed significantly. In particular, acetic acid present in the medium as sodium acetate was consumed by L. brevis ATCC 14869 under extreme pH of both acid and alkaline conditions.

• 한국진공학회지
• /
• 제21권2호
• /
• pp.93-98
• /
• 2012

고상 반응법을 사용하여 $Sm^{3+}$ 이온의 함량비를 변화시키면서 $Gd_{1-x}VO_4:{Eu_x}^{3+}$ 형광체 분말을 합성하였다. 모든 형광체 시료의 결정 구조는 $24.76^{\circ}$에 중심을 갖는 (200) 주 회절 피크로 구성되는 정방정계이었으며, 결정 입자의 형상은 $Sm^{3+}$ 이온의 함량비가 0.05 mol일 때 구형에 근접하고 균일한 크기 분포를 나타내었다. 발광 특성의 경우에, $Sm^{3+}$ 이온의 함량비에 관계없이 모든 형광체 분말은 파장 565, 603, 645 nm에 피크를 갖는 각각 황색, 주황색, 적색 형광을 보였다. $Sm^{3+}$ 이온의 함량비가 증가함에 따라 흡수 스펙트럼의 세기는 감소하는 경향을 나타내었으며, $Sm^{3+}$ 이온의 함량비가 0.05 mol일 때 최대 흡수와 발광 스펙트럼이 관측되었고, 대칭비의 값은 1.19이었다.

• KSBB Journal
• /
• 제25권1호
• /
• pp.85-90
• /
• 2010

An ion selective microelectrode (ISME) was fabricated to measure concentrations of ammonium (${NH_4}^+$-N) and nitrate (${NO_3}^-$-N) according to the depth of nitrifying biofilm. The limits of detectability and validity of results were investigated to evaluate the ISME. The electromotive force (EMF) was directly proportional to the ion concentration, and average detection limits of ${NH_4}^+$ and ${NO_3}^-$ ISME were $10^{-5.14}$ and $10^{-5.18}$ M, respectively. The concentrations of ${NH_4}^+ $-N and ${NO_3}^-$-N in various depths on the nitrifying biofilm were measured by the ISME. When a modified Ludzack-Ettinger (MLE) process was operated at an HRT of 6 h, concentration gradients of ${NH_4}^+$-N in the bulk solution and biofilm at depths of $100\;{\mu}m$ decreased by $70\;{\mu}M$, while ${NO_3}^-$-N increased by $101\;{\mu}M$ and remained constant thereafter. At an HRT of 4 h, concentration gradients of ${NH_4}^+$-N at depths of $500\;{\mu}m$ decreased by $160\;{\mu}M$ and ${NO_3}^-$-N increased by $162;{\mu}M$ and remained constant thereafter. As HRT decreased, the concentration gradients of ${NH_4}^+$-N and ${NO_3}^-$-N between bulk solution and biofilm was higher due to the increase of nitrogen load. Also, the concentration gradients of the ${NH_4}^+$-N and ${NO_3}^-$-N of biofilm in the second aerobic tank were lower than those of the first aerobic tank, suggesting differences of nitrogen load and concentrations of DO between the first and second aerobic tank.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1069-1071
• /
• 1995

The electrical properties of Al/TiN/Ti contact are investigated at submicron contacts. The contact resistance and contact leakage current are dependent on metallization, surface dopant concentration, semiconductor surface treatment and contact plug ion implantation. In this paper, the contact resistance and contact leakage current are studied according to surface dopant concentration, semiconductor surface treatment and contact plug ion implantation at 0.8 micron contact. The contact resistance and contact leakage current increases with increasing substrate ion concentration. HF cleaning represents high contact resistance but low contact leakage current while CDE cleaning represents low contact resistance but high contact leakage current. Contact plug ion implantation decreases contact resistance but increases contact leakage current. Specially, RTA represents good electrical properties.

• 대한화학회지
• /
• 제30권2호
• /
• pp.224-230
• /
• 1986

알킬처리된 실리카(ODS)칼럼을 이용하여 역상 이온쌍 크로마토그래피방법으로 방향족 술폰산들의 분리 인자를 조사하였으며 또한 분리를 시도하였다. 반대이온으로서 브롬화 도데실 트리메틸암모늄(DTAB)을 사용하였으며, 시료의 분리인자는 반대이온의 농도, 메탄올의 농도, 전해질의 종류 및 농도, 시료 분자에 붙어있는 작용기의 종류 및 위치등에 의하여 영향을 받았다. 최적 조건하에서 몇 가지 혼합시료를 분리할 수 있었다.

• Journal of Microbiology
• /
• 제34권1호
• /
• pp.49-53
• /
• 1996

The effects of K$^{+}$ ion on the activity of RNA splicing of T4 phage thymidylate synthase gene have been investigated. The splicing activity was stimulated within the range of 5 to 20 mM concentration of KCI. When the concentration of KCI in the splicing reaction was brought to 100 or 200 mM a small amount of the exonl-intron product (1, 4 kb) was formed with large proportion of primary RNA transcript not undergoing splicing. This observation strongly suggests that there may exist come kinds of interferences with transesterification at the first step of splicing. Overall it can be concluded that K$^{+}$ ion exhibits very unique roles in RNA splicing of tdd gene depending on its concentration.ion.

• Bulletin of the Korean Chemical Society
• /
• 제7권1호
• /
• pp.1-5
• /
• 1986

The influences of $LiNO_3\;and\;AgNO_3$ on the N-C(O) rotational barrier of N,N-dimethylacetamide and N,N-dimethylpropionamide have been investigated. The rotational activation free energy $({\Delta}G^{\neq})\;for\;Li^{+}$-amide complexes is found to increase with increasing salt concentration. On the other hand, that for $Ag^+$-amide complexes increases in the presence of $Ag^+$ ion up to 0.25 M ion concentration and then decreases as the concentration of $Ag^+$ ion is further increased. Such an unusual behavior of $Ag^+$-amide complexes has been interpreted in terms of ion-pairing and diluent effect on the amides. However, $^{13}C$ nmr chemical shift data for the amides have shown that both of these ions interact primarily with the carbonyl group in amides.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.47-53
• /
• 2015

Removal characteristics of Cu(II) ions by solid-phase extractant immobilized D2EHPA and TBP in PVC were investigated. Cu(II) ion concentrations in the solution and removal capacity of Cu(II) ion according to operation time were compared. The lower the initial concentration of Cu(II) ion in aqueous solution was, the removal capacity of Cu(II) ion by solid-phase extractant was increased relatively. The bigger the initial concentration of Cu(II) ion was, the removal capacity of Cu(II) ion was increased relatively. The pseudo-second-order kinetics according to operation time was showed more satisfying results than the pseudo-first-order kinetics for the removal velocity of Cu(II) ion. The removal capacity of Cu(II) ion was 0.025 mg/g in aqueous solution of pH 2, but the removal capacity of Cu(II) ion was increased to 0.33 mg/g mg/g in aqueous solution of pH 4 according to increasing pH.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.348-353
• /
• 2007

A solid state ion sensor module has been developed and evaluated for hydroponic nutrients analysis. The sensor module consisted of five ion-selective electrodes (ISE) fabricated by screen-printing technology. The electrochemical responses of ion sensors for nitrate, ammonium, potassium, calcium, and pH were measured with specially designed 7-channel low voltage signal transducers. The analytical characteristics of the sensors were comparable with those of conventional ISE sensors. The solid state ion sensors exhibit linear relationships over five concentration decades. Detection limit of the sensors were $5.6{\times}10^{-5}{\sim}1.6{\times}10^{-7}M$ depends on ions. Performance test results showed that relative errors of measured ion concentrations were less than 5% for $NO_3{^-},\;K^+,\;Ca^{2+}$ ion, and pH. The concentration of $NO_3{^-},\;NH_4{^+},\;K^+,\;Ca^{2+}$, and pH ion in standard solution and nutrient solutions could be determined by direct potentiometric measurements without any conditioning before measurements.