• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.28-34
• /
• 2020

In this paper, an optical sensor based on an AZO semiconductor material is fabricated on an OHP film with high transmittance, and the characteristics of the optical element and the properties of the semiconductor material are described. In order to realize a flexible optical device, which is a major issue in the field of near-electronic devices, a transparent and bendable OHP film was used as a substrate. In addition, ITO, which is used for mass production as a transparent electrode and a semiconductor material, is expensive due to the scarcity of indium. Therefore, it is necessary to find a material that can replace it. The optical and electrical properties of the Au/Al/AZO/OHP structure are implemented to evaluate whether AZO is possible. It was found that devices and materials had no characteristic change by bending, and these results provide a possibility for application to a next-generation device. However, it is necessary to remove fine scratches on the surface of the OHP film, as well as optimized devices based on materials and structures that can improve the photocurrent.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.11-15
• /
• 2016

The organic light emitting diodes (OLEDs) have been studied as large flexible displays, light source and hard wares of internet of things. However, OLEDs show some drawbacks in terms of external environments due to the low work function of the metals and the reactive organic materials. In particular, the operation functions of the OLEDs tend to deteriorate rapidly by exposing the oxygen and moisture. So as to prevent it, domestic and overseas studies underway in various method such as ALD, PVD, CVD. But it has complex process and high cost. Therefore In order to protect devices from the external environments, it is important to develop the passivation thin films of low-cost and simple process which can prevent the devices from the penetration of the oxygen and moistures. In this study, to improve the reliability, passivation thin films were coated onto the green OLEDs by spin coating method and investigated the changes of the optical properties of the prepared devices at various doping concentrations of sodium alginate (SA). The passivation solutions were synthesized by using polyvinyl alcohol (PVA) host material with a dopant of SA which were added with the amounts of 10, 20 and 40 wt% into the PVA. As a result, the best barrier properties of the OLEDs were obtained for the samples with 40 wt% SA. Finally, the passivation films can be optimized by using the mixture solution of PVA and SA materials.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.17-28
• /
• 2021

Current development of technologies related to 4^th industrial revolution and the pandemic of COVID-19 lead the rapid expansion of e-marketplace. The level of competition among several companies gets increased by introducing different strategies. To cope with the current change in the market and satisfy the customers who request the better delivery service, the new concept, fulfillment, has been introduced. It makes the leadtime of process from order picking to delivery reduced and the efficiency improved. Still, the efficiency of operation in fulfillment centers constrains the service level of the entire delivery process. In order to solve this problem, several different approaches for demand forecasting and coordinating supplies using Bigdata, IoT and AI, which there exists the trivial limitations. Because it requires the most lead time for operation and leads the inefficiency the process from picking to packing the ordered items, the logistics service providers should try to automate this procedure. In this research, it has been proposed to develop the efficient plans to automate the process to move the ordered items from the location where it stores to stage for packing using AGV and AMR. The efficiency of automated devices depends on the number of items and total number of devices based on the demand. Therefore, the result of simulation based on several different scenarios has been analyzed. From the result of simulation, it is possible to identify the several factors which should be concerned for introducing the automated devices in the fulfillment centers. Also, it can be referred to make the optimal decisions based on the efficiency metrics.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.5
• /
• pp.41-48
• /
• 2019

Our daily lives are changing at a rapid pace and the concept of smart city is spreading, as the information communication technologies apply to various fields. However, efforts to prepare for changes in society due to technological evolution are insufficient in the field of landscape architecture. The purposes of this study are to explore the concept of smart parks, to investigate how smart technology has been applied to parks, and to identify the users' perception and satisfaction on smart park services. To this end, we conducted literature review, focus group interviews with experts, and a questionnaire survey with 180 users of the IoT See pilot smart park in Daegu. Smart parks can, as a result, be defined as sustainable parks that improve users' experience in parks and solve social and environmental problems faced by utilizing various high technology. Smart technologies introduced at the park so far have been mostly focused on safety and environmental areas, including AI CCTV, smart street lamp, and fine dust warning devices. The results of survey showed that not many users were aware of the smart services the park provided due to the lack of public communication as well as the nature of maintenance-oriented smart services. The survey also found that AR services for the education of historic parks were the least utilized, while solar power benches and WiFi service were most preferred by the park users. In conclusion, smart technologies need to be integrated with diverse park contents more centered user needs, providing services to enhance safety and environmental management in order to develop user-oriented smart parks.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.107-118
• /
• 2016

The advent of 5G mobile communications, which is expected in 2020, will provide many services such as Internet of Things (IoT) and vehicle-to-infra/vehicle/nomadic (V2X) communication. There are many requirements to realizing these services: reduced latency, high data rate and reliability, and real-time service. In particular, a high level of reliability and delay sensitivity with an increased data rate are very important for M2M, IoT, and Factory 4.0. Around the world, 5G standardization organizations have considered these services and grouped them to finally derive the technical requirements and service scenarios. The first scenario is broadcast services that use a high data rate for multiple cases of sporting events or emergencies. The second scenario is as support for e-Health, car reliability, etc.; the third scenario is related to VR games with delay sensitivity and real-time techniques. Recently, these groups have been forming agreements on the requirements for such scenarios and the target level. Various techniques are being studied to satisfy such requirements and are being discussed in the context of software-defined networking (SDN) as the next-generation network architecture. SDN is being used to standardize ONF and basically refers to a structure that separates signals for the control plane from the packets for the data plane. One of the best examples for low latency and high reliability is an intelligent traffic system (ITS) using V2X. Because a car passes a small cell of the 5G network very rapidly, the messages to be delivered in the event of an emergency have to be transported in a very short time. This is a typical example requiring high delay sensitivity. 5G has to support a high reliability and delay sensitivity requirements for V2X in the field of traffic control. For these reasons, V2X is a major application of critical delay. V2X (vehicle-to-infra/vehicle/nomadic) represents all types of communication methods applicable to road and vehicles. It refers to a connected or networked vehicle. V2X can be divided into three kinds of communications. First is the communication between a vehicle and infrastructure (vehicle-to-infrastructure; V2I). Second is the communication between a vehicle and another vehicle (vehicle-to-vehicle; V2V). Third is the communication between a vehicle and mobile equipment (vehicle-to-nomadic devices; V2N). This will be added in the future in various fields. Because the SDN structure is under consideration as the next-generation network architecture, the SDN architecture is significant. However, the centralized architecture of SDN can be considered as an unfavorable structure for delay-sensitive services because a centralized architecture is needed to communicate with many nodes and provide processing power. Therefore, in the case of emergency V2X communications, delay-related control functions require a tree supporting structure. For such a scenario, the architecture of the network processing the vehicle information is a major variable affecting delay. Because it is difficult to meet the desired level of delay sensitivity with a typical fully centralized SDN structure, research on the optimal size of an SDN for processing information is needed. This study examined the SDN architecture considering the V2X emergency delay requirements of a 5G network in the worst-case scenario and performed a system-level simulation on the speed of the car, radius, and cell tier to derive a range of cells for information transfer in SDN network. In the simulation, because 5G provides a sufficiently high data rate, the information for neighboring vehicle support to the car was assumed to be without errors. Furthermore, the 5G small cell was assumed to have a cell radius of 50-100 m, and the maximum speed of the vehicle was considered to be 30-200 km/h in order to examine the network architecture to minimize the delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.375-381
• /
• 2018

As smart home network services such as home CCTV, outdoor control of home appliances, home security and disaster prevention services become popular, there appear various affiliated products including smart home gateway and smart speaker. Since those services are generally developed on the vendors' individual hardware and software platforms, it is not much expected for them to interwork well among different architecture and communication methods. In this paper, we propose a new home network service system running on an open source platform to address such issues. We implemented a home network system using OpenWRT-based wireless router(or access point) and Zigbee communication technology. In the proposed system, a wireless router replaces a commercial home gateway and small control units implemented with Arduino control electronic devices and sensors in home. Several service scenarios are also implemented to verify the operability of the proposed system.

• Journal of the Korean Society for Library and Information Science
• /
• v.51 no.4
• /
• pp.203-226
• /
• 2017

The advent of the fourth industrial revolution has led to various technologies such as bigdata, the internet of things, artificial intelligence etc. Based on these innovations, the types of information services can changed in the library. The focus is on smart device. This study aims to identify utilization status and service implications of the smart device in the library. To achieve this goal, we conducted current status analysis of the smart device in the library through literature research and online search and gathered the executives views of practical librarians. Consequently, we proposed improvement of library service by using smart device. The results of this study will be expected to help next generation library establish service strategies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1077-1082
• /
• 2019

The development of computing technology and networking has developed into a fundamental technology of the Fourth Industrial Revolution, which provides a ubiquitous environment. In the ubiquitous environment, the IoT environment has become an issue so that various devices and the things can be actively accessed and connected. Also, the RFID system using the wireless identification code attaches an RFID tag to the object, such as the production and distribution of products. It is applied to the management very efficiently. EPCglobal is conducting a research on RFID system standardization and various security studies. Since RFID systems use wireless environment technology, there are more security threats than wire problems. In particular, failure to provide confidentiality, indistinguishability, and forward safety could expose them to various threats in the Fourth Industrial Revolution. Therefore, this study analyzes the standard method of EPCgolbal and proposes RFID security method using hash code that can consider the amount of computation.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.490-493
• /
• 2014

To protect the students from food poisoning, in this paper, it is proposed that the Smart HACCP system which based with WCDMA-LTE to monitoring the temperature and humidity of a freezer, a heating cabinet and kitchen instruments at the elementary, junior and high school. After gathering the data, It is compared with a standard food poisoning index to provide more safe food reserves from the server. Then the server send a index to the terminal which is installed in a kitchen at any school to show the current environment. It is need an WCDMA-LTE terminal to realize smart HACCP system that is proposed from this paper. So, the proposed WCDMA-LTE terminal is designed with using a LTE modem included a 424 MHz wireless modem and a bluetooth 4.0 modem to communicate with other terminals. It can be use the monitoring system of a plastic greenhouse or remotely environment control system.

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.111-118
• /
• 2014

The Smart grid refers to the technology that enables efficient usage of electric power by collecting information concerning the power usage and power lines grafting information and communications technology to onto power grids. There are Zigbee, PLC or IEEE 802.11 WLAN MAC as a core technology of the Smart grid, but in this paper, the discussion is focused on the PLC. The PLC is the technology that carries out data communications using power lines and put into practical use in the field of lights or home appliances control recently but PLC-applied communications between electronic devices are rarely seen. For the reason that the PLC uses high-voltage power lines and has a disadvantage of experiencing higher data loss rate caused by the noises produced by going through transformers, the technology is yet to be used in many areas. Nevertheless, the PLC has been studied widely recently in respect that it's the low-cost communication solution for the Smart Metering [1]. Moreover, this technology is emerging as a novel data communication method and discussed as an important technology lately due to the developments of the Smart grid systems and Internet of things (IoT). Thus, in this paper, the results obtained from designing and performing implementation scenario for the PLC-based Smart grid home network system were compared and analyzed with that of IEEE 802.11 WLAN MAC (the foundation technology at Jeju Smart grid Test bed)-based Smart grid home network. Thus, in this paper, OPNET 14.5 PL8, OSI 7 layer, PLC router nodes and PLC nodes had been used for the designing and implementation simulations of both systems. Additionally, QoS was not considered in order to guarantee that all the traffics would not have the same processing priority.