• Restorative Dentistry and Endodontics
• /
• 제34권6호
• /
• pp.467-476
• /
• 2009

본 연구의 목적은 아말감과 복합레진의 수복 과정과 수복 후 상아세관액의 흐름(dentinal fluid flow, DFF)을 측정하기 위함이다. 치근을 절제한 제 3 대구치를 자체 제작한 미세 유체 흐름 측정장치에 연결한 후 1급 와동을 형성하여 아말감과 복합레진 수복을 시행하였다. DFF의 측정은 와동 형성부터 수복 후 30분까지 연속적으로 이루어졌고, 수복 후 3, 7일에 재 측정하였다. 주수 하에 와동 형성 시 DFF는 inward로, 끝난 후에는 outward로 바뀌었다. 아말감 충전 시 DFF는 inward로 바뀌었고 충전 완료 후 미약한 outward DFF를 보였다. 복합레진 수복의 경우, 산 처리 후 수세와 건조 시 각각 inward와 outward DFF를 보였고 primer도포 후 공기 분사는 급격한 outward, 소수성 본딩제를 적용하는 단계에서는 outward 였던 DFF가 감소하여 0에 가까워지거나 약간 inward 흐름을 보였다. 접착제와 복합레진의 광중합은 급격한 inward의 DFF를 일으켰다. 수복 후 30분, 3일, 7일째 수복 재료에 따른 DFF의 감소에 통계적으로 유의한 차이는 없었다 (p>0.05).

• 한국유체기계학회 논문집
• /
• 제12권2호
• /
• pp.17-23
• /
• 2009

The program using $C/C^{++}$ which could calculate 3-D velocities from data of the flowfield obtained by a slant hot-wire has been developed. The characteristic of the exit flowfield of a circular nozzle with a curved surface was investigated. From the result, the inward-flow was verified at adjacent layers near the boundary of the exit flowfield of a circular nozzle in Id and outward-flow was sensed gradually from down-flow of Id. Similarity of the nondimensional velocity profile properlly could be obtained except near Id and the virtual origin reasonably could be obtained.

• Advances in aircraft and spacecraft science
• /
• 제7권5호
• /
• pp.441-458
• /
• 2020

Rectangular-to-Ellipse Shape Transition (REST) inlets are a class of inward turning inlets designed for hypersonic flight. The aerodynamic design of REST inlets involves very complex flows and shock-wave patterns. These inlets are used in highly integrated propulsive systems. Often the design of these inlets may require many geometrical constraints at different cross-section. In present work a design approach for hypersonic inward-turning inlets, adapted for REST inlets, is coupled with a multi-objective optimization procedure. The automated procedure iterates on the parametric representation and on the numerical solution of a base flow from which the REST inlet is generated by using streamline tracing and shape transition algorithms. The typical design problem of optimizing the total pressure recovery and mass flow capture of the inlet is solved by the proposed procedure. The accuracy of the optimal solutions found is discussed and the performances of the designed REST inlets are investigated by means of fully 3-D Euler and 3-D RANS analyses.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1416-1428
• /
• 2021

Pebble flow characteristics can be significantly affected by the configuration of pebble bed, especially for HTGR pebble beds. How to achieve a desired uniform flow pattern without stagnation is the top priority for reactor design. Pebbles flows inside some specially designed pebble bed with arc-shaped contraction configurations at the bottom, including both concave-inward and convex-outward shapes are explored based on discrete element method. Flow characteristics including pebble retention, residence-time frequency density, flow uniformity as well as axial velocity are investigated. The results show that the traditionally designed pebble bed with cone-shape bottom is not the most preferred structure with respect to flow pattern for reactor design. By improving the contraction configuration, the flow performance can be significantly enhanced. The flow in the convex-shape configuration featured by uniformity, consistency and less stagnation, is much more desirable for pebble bed design. In contrast, when the shape is from convex-forward to concave-inward, the flow shows more nonuniformity and stagnation in the corner although the average cross-section axial velocity is the largest due to the dominant middle pebbles.

• 한국의사학회지
• /
• 제18권2호
• /
• pp.55-62
• /
• 2005

In "Lingshu Benshen". five vicera are damaged due to changes in emotion having qi flow opposite to five viscera. As a result, it suggests that mental and physical illness could develop. The content of this piece can be explained in relation to five elements but uniformly through qi's flow. The contents can be summarized as follows. 1. The Heart is fire among the five elements and mainly characterized with dispersing. The flow of its qi is characterized facing upward and outward. On the other hand, being afraid or thinking seriously is characterized by making qi to go downward and stop so that the flow of qi is mainly facing toward inward and downward, damaging the heart. 2. The spleen has the conveyance function and spreads qi. On the other hand, worry and emotion inhibit qi function, blocking qi, damaging the spleen. 3. The liver has dispelling and removing functions and the power of sending up. The qi flow goes toward upward and outward. On the other hand, sadness stagnates qi, preventing the flow of liver's qi, damaging the liver. As a result, work is not done accurately. Madness develops with heat accumulated with qi stagnation. When qi is not sending up, mentality is not clear, leading to forgetfulness. 4. The lung has astringent and sending down functions, lowering qi. On the other hand, happy and joyful emotions bring up qi, showing the opposite flow of qi compared with the lung, damaging the lung. 5. The kidney has closing and storing functions, making qi flow to downward and inward. On the other hand, being angry makes qi to go up. Excessive expression of anger damages the kidney. As a result, the yin function of kidney does not work properly, leading to forgetfulness.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.75-84
• /
• 2000

Performance and flow characteristics of a small forward swept propeller fan for home refrigerators are studied experimentally. An unusual discontinuity is observed in the performance curve of the fan. Mean flow fields measured with as-hole Pitot probe reveal that the flow is axial at the high flow rate and radial at the low flow rate. The flow structure changes abruptly across the discontinuity. Unsteady flow measurements with a set of hot-wire probes indicate that near the discontinuity a single-cell stall rotates at 40% speed of the fan speed, while away from the discontinuity the flow shows periodic variation corresponding to the blade passage frequency. Phase-lock averaged flow fields measured with a triple-sensor hot-wire probe show that there appears radially inward flow over the pressure side of the blade and the outward passage flow over the tip.

• 사상체질의학회지
• /
• 제21권1호
• /
• pp.53-62
• /
• 2009

1. Objectives The purpose of this study is to find the ground why constitution must be classified into 4 types. 2. Methods I analysed the basic presuppositions to class 4 Type Constitution in Sasang Constitutional Medicine(SCM). And I connected the presuppositions with other theories from the viewpoint of directional properties of human body. 3. Results and Conclusions The most important presupposition to class 4 Type Constitution and apply to clinical therapy in SCM is that there is native strength and weakness of lung's Exhale Dispersing Qi, liver's Inhale Gathering Qi, spleen's Ascending Yin Qi and kidney's Descending Yang Qi. If there is superior tendency of Qi flow direction in human body, 6 directions(upward, downward, forward, backward, outward and inward) will be remarkable. But, in embryonic period, the outer skin is originated from the back(ectoderm) and the alimentary canal is from the front(endoderm). Therefore 4 directions(upward, downward, outward and inward) will be more remarkable, and those directions are included in the former presupposition.

• 대한기계학회논문집B
• /
• 제32권2호
• /
• pp.141-148
• /
• 2008

A numerical simulation of brushless DC motor is performed to elucidate thermo-flow characteristics in winding and bearing with heat generation. Rotation of rotor and blades drives influx of ambient air into the rotor inlet. Recirculation zone exists in the tiny interfaces between windings. The flow separation causes poor cooling performance in bearing part and therefore the redesign of the bearing groove is required. The design parameters such as the inlet location, geometry and bearing groove threshold angle have been selected in the present simulation. As the inlet location moves inward in the radial direction, total incoming flow rate and heat transfer rate are increased. Total incoming flow rate is increased with increasing the inlet inner length. The effect of the bearing groove threshold angle on the thermal performance is less than that of other design parameters.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.487-490
• /
• 2002

The real chip and similarity model were used to investigate the thermal behavior and velocity distribution of air from the heat source with the location and the amount of heat experimentally and numerically, and compared. The heat generated in the block is not cooled by convection and show the high temperature by the stagnation of heat flow. After maintaining the high temperature of block by the natural convection, the sudden drop of temperature with the air flow was shown in the channel but the decreasing rate was small with the time. The inward block was effected by infinitesimal air flow generated between block and channel and outward block was effected by the entry condition.

• 한국유체기계학회 논문집
• /
• 제7권4호
• /
• pp.40-46
• /
• 2004

This paper is concerned with the numerical analyses of an S-shaped duct for the inter-channel between compressor spools. For the compactness and lightweight of an engine, the length of the S-shaped duct is desired to be minimized. Shortening the S-shaped duct, however, flow separation is likely to occur. Numerical investigation using a three-dimensional Navier-Stokes flow solver was performed to determine the availability of the minimization of an S-shaped duct. Computations were performed introducing the experimental data as the inlet flow condition of the OGV in determining the minimum length of the S-shaped duct. Also, the leaning effect of the OGV which assists the flow to turn radially inward was studied adopting mixing-plane method to consider the rotor/OGV interaction.