• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.949-959
• /
• 2009

This paper presents a systematic investigation of the fault-mode behaviors of matrix converter systems. Knowledge about converter behaviors after fault occurrence is important from the standpoint of reliable system design, protection and fault-tolerant control. Converter behaviors have been, in detail, examined with both qualitative and quantitative approaches for key fault types, such as switch open-circuited faults and switch short-circuited faults. Investigating the fault-mode behaviors of matrix converters reveals that converter operation with switch short-circuited faults leads to overvoltage stresses as well as overcurrent stresses on other healthy switching components. On the other hand, switch open-circuited faults only result in overvoltage to other switching components. This study can be used to predict fault-mode converter behaviors and determine additional stresses on remaining power circuit components under fault-mode operations.

• The Korean Journal of Applied Statistics
• /
• v.15 no.2
• /
• pp.323-336
• /
• 2002

In this paper we consider the modified continual reassessment method in which a cohort consists of three patients. Simulation has been a main research tool in the investigation of CRM. In this paper we propose complete enumeration as an alternative of simulation. Using new method we show that the expected toxicity rate at the MTD converges to the target toxicity rate well as the sample size increases.

• Journal of computational fluids engineering
• /
• v.10 no.1
• /
• pp.87-93
• /
• 2005

Macao, a city with three sides bounded by water, is hot and humid in weather in more than six months of a year. This uncomfortable weather induces the frequency of operating air-conditioners. Choice of location for installation of air-conditioner in a building will affect the performance of cooling effect and thermal comfort on the occupants, which in turn will affect the indoor air quality (IAQ) of the building. In the paper, investigation of distribution on carbon dioxide, room air temperature and velocity, as well as air diffusion performance index (ADPI) of a single bedroom in Macao is studied by using the computational fluid dynamics (CFD) software FLOVENT 3.2. Simulations of locating the air-conditioner at 4 different walls will be done and comparisons and analyses of the results will be performed to decide a proper location for the air-conditioner for obtaining good thermal comfort.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.565-565
• /
• 2013

Free burning arcs where the work piece acts as an anode are frequently used for a number of applications. Our investigation is exclusively concerned with a simplified unified model of arcs and anode under steady state conditions at atmospheric pressure. The model is used to make predictions of arc and anode temperatures and arc voltage for a 200 A arc in argon. The computed temperatures along the axis between the cathode tip and the anode surface compare well the measured data. This knowledge of free burning arcfeatures can play a role in developing the atmospheric plasma systems, however, further investigation should include the modelling of Cu evaporation from anode and non-LTE situation near electrodes for more realistic calculations.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.67-76
• /
• 2000

Experimental and numerical investigation on NOx emission characteristics with equivalence ratios, fuel flow rates and nozzle diameters were studied in CH4 Jet flames. Emission indices of NOx were measured by chemiluminescent method with carbon converter. Numerical analyses were carried out with GRl-2.11 mechanism that includes C2-chemistry and all of NO reaction mechanisims. The roles of thermal NO and prompt NO mechanism on each flame's NOx emission index were investigated. The results of this study show that the numerical results represent well the trends of ElNOx experimentally observed. The numerical analyses clarified the trends of EINOx with equivalence ratios, fuel flow rates and nozzle diameters.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.63-71
• /
• 2008

This study was conducted with respect to the causal factors revealed through the investigation of the recent airlines aircraft crash accident which occurred while aircraft was on the climb-out or on the final approach. This study also highlighted the importance of flight deviation and exceedance occurrences in consideration of Flight Operational Quality Assurance Program(FOQA). Twenty airline pilots participated in the flight experiment to perform ten(10) sets of simulated approaches and landings. As a result, Twelve(12) kinds of deviation events were discovered. In this respect, The FOQA program must be fully implemented to prevent any flight safety incident under the auspices of the Korea domestic aviation community as well.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.91-98
• /
• 2001

As the second part of the author's study, off-design behavior of the design and performance parameters in the low-solidity cascade diffuser in a centrifugal compressor is investigated. The experimental flange-to-flange compressor map serves the validity of application of the present CFD work to the detailed investigation of the low-solidity cascade diffuser. Some meanline design and performance parameters as well as three-dimensional internal secondary flow fields are studied when the flow rate is changed from deep choke to stall.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.178-179
• /
• 2005

Numerical and experimental investigation of incompressible turbulent flow and heat transfer through square channels with varying number of ribbed walls were conducted to determined pressure drop and heat transfer. The CFX solver used for the computation. The rough walls have a $45^0$ inclined square rib. Uniform heat flux is maintained on whole inner heat transfer channel area. The numerical results agreed well with experimental data that obtained for 7600$D_h$) of 0.0667. The results show that values of local heat transfer coefficient and friction factor increase with an increasing number of ribbed walls.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.408-414
• /
• 2001

The structural characteristics of the stiffened double cylinder was investigated through experiment and analysis. The outside cylinder was excited with piezoelectric actuator and the mode shape of the cylinder with stiffening T frame was obtained by using holographic interferometry. Finite element method was applied for further modal investigation of the stiffened cylinder. The experimental results showed that the mode shape of cylinder was dependent on the exciting frequencies and the T frame showed salient effect of damping at most of the resonent frequencies. In particular frequencies, the T frame worked as a transmitter. FFM showed similar results with the experiments. This paper showed that the laser-based method such as holographic interferometry is well suited for investigation of the whole-field mode shapes and FEM has good performance to estimate the medal characteristics of the mechanical structure.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.208-213
• /
• 1996

This paper reports a preliminary investigation on the time course of intersyllabic coarticulation in Standard Chinese. In this investigation, around 3800 phonetically compact C1V1-C2V2 type disyllabic structures 3re employed to observe the acoustic effect of coarticulation in general, and about 400 disyllabic words are designed as the materials to examine: (1) How the articulators move from one syllable to the next？ (2) What is the extent to which the syllables overlapped？ And (3) In what sense, the syllables are produced in parallel; and in what sense, they are in sequence？ For the convenience of description, we just take the offset transition of V1 end the onset transition of C2 os the rough representations for anticipatory and carryover effect respectively, durational measurements are made correspondingly. To evaluate the possible influence on the behavior of gestural overlap from stress contrast and constituent difference of the syllables, analysis of variance are counducted as well. Based on this study, Some impressions about general nature of coarticulation behined the intersyllabic gesture overlapping in this language are discussed.