• Journal of Forest and Environmental Science
• /
• v.22 no.1
• /
• pp.41-49
• /
• 2006

The design instruction put in the wood structure construction manual of forest engineering works issued in Japan in 2004 is composed of the introduction, the use and characteristic of wood, investigation, planning, design, and etc. of wood structures. We analyzed the introduction, the use and characteristic of wood, investigation and planning for wood structures. By the results. the contents on the characteristic of wood are shown about physical and chemical properties of wood, the environmental influence, psychological and physiological effects, and rot of wood. The investigation items include the effective degree by flow and insolation, white ant's genital existence, flow conditions of surface water and ground water, situations of flora and fauna to live in mountain stream, the condition of water use, and etc. Also, the contents for the planning are explained for the structure, installation features. treatments, use of wood and lumber in the regions, preservative treatment, and etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.321-330
• /
• 2020

The defense industry has recently been focused on boosting exports of weapon systems. Investigation and selection of promising export items for SMEs in the defense industry is essential to establish a defense promotion policy. This study presents a model for selecting promising export items applicable to the defense industry through case studies, such as criteria for selecting promising items from other organizations. The evaluation index is largely composed of three categories, competitiveness of the item itself, capabilities of the exporter, and ripple effect of the export, and consists of eight detailed evaluation indicators. The relative weight between categories was calculated through the AHP method. In the selection model, if a certain score is exceeded, it is then possible to adopt a promising item or verify validity. In particular, promising items were selected by applying this methodology to those involved in the defense industry. Using the model presented in this study, it is expected that domestic small and medium-sized enterprises with relatively high export competitiveness and excellent quality items will be given priority, and more effective and intensive export support will be possible.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.45-53
• /
• 2008

In this paper, the property of influent water and variations of removal efficiencies in each unit processes were studied based on the experiment data from the advanced water treatment plant in a city of Korea. The microbial species in the biological activated carbon(BAC) after backwashing of activated carbon filtration tank(ACFT) were also identified. The property and the removal efficiencies were evaluated by considering 8-9 items. The variations of 4 items were investigated from the influent and effluent of ACFT. SEM recording were conducted on BAC samples before and after backwashing. And the existence of attached microorganisms were identified through HPC(Heterotrophic Plate Counter) investigation. For the property of influent water, the concentrations of most items were maintained in the constant ranges, some items had seasonal properties. For the removal efficiencies, there were some items showing similar monthly-pattern and increasing with time, other items decreasing at the ozone contactor. Through these investigations, it was possible to distinguish the target items, which were removed by the advanced processes. The existence of microorganisms in ACFT could be predicted based on the variation curve of NH$_3$-N, and this fact were proved by SEM and HPC.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.306-315
• /
• 2005

The distribution and composition of marine floating debris were recorded from a training ship 'Kyeongyang' of Gangwon Provincial University at May 19-29, 2004 and Aug.24-31, 2004. The sampled area is the middle part of East Sea of Korea(the coast of Gangwondo and region of Ulleung island and Tokdo), divided into 27 unit segments on survey areas. Debris fabrication materials were categorized with 6 items using the following; styrofoam, paper & cardboard, net & rope, vinyl & plastic, floating metal & glass, man-made or natural wood. From the investigation on May,2004, total numbers of marine floating debris in the middle part of the East Sea of Korea was 996 individuals. The No. 1 and No. 2 unit segment located at south-west region of Ulleung Island showed higher density than others. The styrofoam and vinyl & plastic accounted for 72.8% of all debris fabrication materials. From the investigation on August, 2004, total numbers of marine floating debris in the coast of the Gangwondo of Korea was 2,473 individuals. The No. 13 and No. 14 unit segment located at the vicinity of Samcheok showed higher density than others. The styrofoam and vinyl & plastic amounted to 76.1%. In the coast of the Gangwondo, the vinyl & plastic showed the highest density of 6 items were 41.3% and 68.0% on May and August, respectively. The total numbers of marine floating debris on May and August were 3,399 individuals. Vinyl & plastic accounted for 59.4%(2,019 ind.) among all debris, next styrofoam 15.8%(537 ind.) and wood 11.2%(379 ind.).

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.579-588
• /
• 2021

Purpose: The purpose of this study is to analyze how the participating companies related to asbestos dismantling affect the safety of residents near asbestos dismantling worksites, and to present important criteria for selecting asbestos dismantling related companies based on the analysis results. Method: In this study, based on the Occupational Safety and Health Act and the Asbestos Safety Management Act, important items about participating companies related to asbestos dismantling and the safety of residents near the asbestos dismantling workshop were derived, and then questionnaire items were determined through FGI. Multiple regression analysis was performed to analyze the influence relationship. Result: In order to secure the safety around the asbestos dismantling site, it was confirmed that the ability of asbestos dismantling supervisors among the participating companies (dismantling companies, investigation agencies, and supervisors) had the greatest influence. Conclusion: It showed that it is essential to select an excellent asbestos dismantling supervisor and an excellent asbestos dismantling and removal company in order to ensure the safety of residents near the asbestos dismantling site.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.514-514
• /
• 1996

Igbo, a new Benue Congo language has a vowel harmony system which, like that of Akan, is based on the pharynx size or tongue root position. In this study we examine Igbo vowel harmony with particular reference to assimilatory patterns of vowels in different harmony sets. This is to gain some insight into the factors involved in Igbo vowel assimilation, and to establish to what extent reports on Akan vowel assimilation are validated in Igbo. Tokens of the eight phonemic vowels of Standard Igbo are recorded from three native speakers of Igbo. The vowels are acoustically investigated (using the LPC analysis of CSL) in individual lexical items and within carefully designed carrier phrases. The F1 and F2 values of the vowels are obtained as these formant values are generally useful in establishing the salient characteristics of vowels. Vowels from the harmony sets are juxtaposed in the carrier phrases to ascertain the extent of assimilation. Results of the investigation show that the F1 values, to a large extend, are enough to characterize these vowels. The (-Expanded) vowels have higher F1 values than their (+Expanded) counterpart. Where there is an overlap in F1 values for some vowels the F1 bandwidth values serve to distinguish between the vowels. The overlap often reported in Akan for /I/ and /e/ on the one hand and /${\mho}$/ and /o/ on the other is not validated in Igbo. While the F1 values for these pairs of vowels are quite similar for one of our speakers, there is an appreciable difference between the F1 values of these vowels for the other two speakers. There is however an overlap for /e/ and /o/ for one of the speakers. Assimilations are generally regressive across word boundaries. It is, however, necessary to point out that the general perceptual impression that one of the vowels completely assimilates to the other, is not borne out by our investigation. Most of our F1 and F2 values for the vowels in individual lexical items are altered in assimilations. This then suggests that assimilation involving these vowels is partial rather than complete. The emerging 'allophones' are acoustically similar to the (+Expanded) vowel involved in the assimilation, that is when vowels from different harmony sets are involved. We conclude that while assimilation of Igbo vowels involves some phonological considerations, phonetic factors appear to be permanent in deciding the final form of the vowels.

• Journal of Science Education
• /
• v.34 no.2
• /
• pp.327-341
• /
• 2010

The purpose of this study is to obtain science high school students' perceptions of scientists and their work before and after the Green Investigation program with scientists. This study also attempts to determine whether the program affected the participants' perceptions of scientists and their work. A modified DAST was carried out with 64 high school students. Findings revealed that Korean science high school students had normal perceptions of scientists, such as images of 20 to 30 year old males wearing laboratory coats and working alone in research labs with test tubes, flasks, and several machines in the background. After the intervention, students drew fewer typical items representing scientists and had significantly different perceptions of their work places between the pretest (M=1.69, SD=1.14) and posttest (M=1.96, SD=1.24, t=4.43, p<0.001) with the eta squared statistics (.24). These findings reflect the need for continued efforts of developing green investigation programs with scientists for students. Some future studies based on this study are also introduced.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2001.09a
• /
• pp.57-74
• /
• 2001

The risk of the soil and groundwater that contaminated with petroleum is well known. The behaviour of petroleum in subsurface is governed by combined mechanism of several processes such as volatilization, adsorption, dissolution, biodegradation, etc. Large number of methods of remedial investigation and plan, therefore, have been developed and practiced. In application of the method, it is required engineer understands the mechanism of fate of petroleum in subsurface. So sampling procedures is very important for investigating the type of contaminants and their concentration as well as the selection of items that must be tested. For designing the remedial method, it is also required engineers to verify the structural formation of geology and the locational conditions of a land in detail, to familiar with the regulation, and to investigate the problems that can be happened after the performance was begun. In this paper it is shown that the investigation methods of contaminated land and the proper selection procedure of remedial method using the case history.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.5
• /
• pp.261-273
• /
• 2022

In this study, we collect water control valves that have had accidents due to existing cracks, etc. are collected, and propose investigation items for strengthening the valve structural safety evaluation through a series of analyzes from valve specifications to physicochemical properties are proposed. The results of this study are as follows. First, there was a large variation in the thickness of the body or flange of the valves to be investigated, which is considered to be very important factor, because it may affect the safety of the valve body against internal pressure and the flange connected with the bolt nut. Second, 60% of the valves under investigation had many voids in the valve body and flange, etc. and the decrease in thickness due to corrosion was relatively large on the inner surface in contact with water rather than the outer surface. It is judged that the investigation of depth included voids is very important factor. Third, all valves to be investigated are made of gray cast iron foam, and therefore it is judged that there is no major problem in chemical composition. It is judged that the chemical composition should be investigated. Fourth, as a physical investigation item, the analysis of metal morphology structure seems to be a very important factor for nodular cast iron from rather than a gray cast iron foam water valve with a flake structure. As it was found to be 46.7~68.8% of the standard recommended by KS, it could have a direct effect on damage such as cracks, and therefore it is judged that the evaluation of tensile strength is very important in evaluating the safety of the valve.

• CRM연구
• /
• v.4 no.2
• /
• pp.19-29
• /
• 2011

There is a large difference between purchasing patterns in an online shopping mall and in an offline market. This difference may be caused mainly by the difference in accessibility of online and offline markets. It means that an interval between the initial purchasing decision and its realization appears to be relatively short in an online shopping mall, because a customer can make an order immediately. Because of the short interval between a purchasing decision and its realization, an online shopping mall transaction usually contains fewer items than that of an offline market. In an offline market, customers usually keep some items in mind and buy them all at once a few days after deciding to buy them, instead of buying each item individually and immediately. On the contrary, more than 70% of online shopping mall transactions contain only one item. This statistic implies that traditional data mining techniques cannot be directly applied to online market analysis, because hardly any association rules can survive with an acceptable level of Support because of too many Null Transactions. Most market basket analyses on online shopping mall transactions, therefore, have been performed by expanding the co-occurrence criteria of traditional association rule mining. While the traditional co-occurrence criteria defines items purchased in one transaction as concurrently purchased items, the expanded co-occurrence criteria regards items purchased by a customer during some predefined period (e.g., a day) as concurrently purchased items. In studies using expanded co-occurrence criteria, however, the criteria has been defined arbitrarily by researchers without any theoretical grounds or agreement. The lack of clear grounds of adopting a certain co-occurrence criteria degrades the reliability of the analytical results. Moreover, it is hard to derive new meaningful findings by combining the outcomes of previous individual studies. In this paper, we attempt to compare expanded co-occurrence criteria and propose a guideline for selecting an appropriate one. First of all, we compare the accuracy of association rules discovered according to various co-occurrence criteria. By doing this experiment we expect that we can provide a guideline for selecting appropriate co-occurrence criteria that corresponds to the purpose of the analysis. Additionally, we will perform similar experiments with several groups of customers that are segmented by each customer's average duration between orders. By this experiment, we attempt to discover the relationship between the optimal co-occurrence criteria and the customer's average duration between orders. Finally, by a series of experiments, we expect that we can provide basic guidelines for developing customized recommendation systems.