• 한국안전학회지
• /
• 제21권4호
• /
• pp.95-101
• /
• 2006

It is well known that the thermal load in PSC(prestressed concrete) box-girder bridge is the principal cause of detrimental crack. The longitudinal stress caused by the lateral stress from the temperature gradient in slab of PSC box-girder bridge has a considerable influence on the durability and economy of bridge structures. As the basic study for the rational consideration of thermal load and the derivation of design guide, the inverse thermal analysis program for PSC box-girder bridges using field measurement data is developed. In this paper, thermal analyses are performed using field monitoring data for the sample PSC box-girder bridge. It is proposed that the link between monitoring program and the inverse analysis program is available.

• 한국터널지하공간학회 논문집
• /
• 제16권1호
• /
• pp.1-11
• /
• 2014

본 논문은 단선터널 라이닝의 최적 계측 측점수를 산정하기 위해 단순보 형태로 모델링하여 터널 라이닝 역해석 프로그램에 적용한 결과와 상용 프로그램에 적용한 결과를 상호 비교하여 평가하였다. 단선터널을 대상으로 터널 라이닝에 대칭 분포하중이 작용하는 경우와 비대칭 분포하중이 작용하는 경우로 가정하여 터널해석 시 널리 사용되는 상용 프로그램에 하중조건을 입력시켜 터널 라이닝의 단면 위치별 변위와 응력을 산출하였다. 산출된 변위를 계측 측점수 3점, 5점, 7점으로 터널 라이닝 역해석 프로그램에 입력시켜서 구한 응력과 변위를 비교하여 최적 계측 측점수를 산정하였다. 연구결과 실무적으로 계측 수행의 경제성과 터널 계측의 손망실률을 고려한 계측 측점수가 최소 5점은 되어야 할 것으로 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.603-606
• /
• 2002

Numerical analysis and its inverse design process of 2nd stage of JT8D aircraft engine is described. One of the most important factors that affect the performante of turbomachine is secondary flow in the blade passage, so that the performance of turbomachine can be improved by controlling secondary flow. In this paper, as a method to control secondary flow, commercial inverse design program, TurboDesign is used. Meridional derivative of angular momentum is selected as a parameter to control blade leading in this program, To validate inverse designed model, computational analysis is applied which includes rotor-stator-interaction. In this paper, CFB results of both original and inverse designed model are compared to examine how much the performance improves without reduction of work output.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.93-97
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism and a curved inverse earn. The main objective is the development 0 fan algorithm of the earn-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the second part of paper, this paper introduces the technique for the mechanism simulation and graphics-oriented CAD programming. The first part of r paper presents the algorithm to analyze the motion of the inverse earn and the automatic feeding mechanism.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.83-91
• /
• 1987

This paper is concerned on kinematic Analysis and Simulation of an automatic feeding mechanism and a curved inverse cam. The main objective is the development of an algorithm of the cam-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the first part of paper, this paper introduces the algorithm to analyze the motion of the inverse cam and the automatic feeding mechanism. The second part of paper presents the technique for the mechanism simulation and graphics-oriented CAD programming.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2043-2050
• /
• 1993

This paper presents a three dimensional modeling and dynamic analysis of a hydraulic excavator. An excavator composed of a boom, a bucket, two boom cylinders, an arm cylinder, and a bucket cylinder is used for the analysis. Each cylinder is modeled to two separate bodies linked by a translational joint. Judging from the actual degrees of freedom of the excavator, proper kinematic joints are selected to exclude redundant constraints in the modeling. In order to find the reaction forces at kinematic joints during operations, inverse dynamic analysis is carried out. Dynamic analysis is also carried out to verify the results from inverse dynamic analysis. The DADS program is used for analysis, with proper modification of the DADS user routine according to various motions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.881-886
• /
• 2004

This paper presents the inverse dynamic analysis of the wheel loader manipulator based on the experimental data. A three dimensional rigid multi-body model of the wheel loader manipulator was built up. The inverse dynamic analysis for the typical operation mode was carried out by the ADAMS program. In order to verify the analysis result with the measured one, the hydraulic pressure and displacements of the cylinders were measured and the inverse dynamic analysis was carried out using experimental data. From the results of the analysis and measurement, it was concluded that the computational driving force showed good agreement with the measured one.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3398-3407
• /
• 1996

In this paper, we derive an algorithm and develope a computer program which analyze rapidly and precisely the inverse kinematics of robotic mechanism with spatial complex chain structure based on the relative coordinates. We represent the inverse kinematic problem as an optimization problem with the kinematic constraint equations. The inverse kinematic analysis algorithm, therefore, consists of two algorithms, the main, an optimization algorithm finding the motion of independent joints from that of an end-effector and the sub, a forward kinematic analysis algorithm computing the motion of dependent joints. We accomplish simulations for the investigation upon the accuracy and efficiency of the algorithm.

• 대한방사선기술학회지:방사선기술과학
• /
• 제36권4호
• /
• pp.319-326
• /
• 2013

본 연구에서는, 흉부단순사진에 있어서 종양그림자의 검출에 대한 흑백 Inverse image과 Hybrid image의 유용성을 ROC해석으로 검토하였다. 증례의 선택은 일본방사선기술학회가 발행한 표준 Digital 영상 Date Base로부터 30장을 선택 하여 original image로 하였다. c언어를 통해 Inverse image는 60장, Hybrid image는 30장 제작하였다. 실험방법으로 연속 판독실험을 하였고, ROC실험 display program은 Matlap을 통하여 작성하였다. 관찰자의 수는 Inverse image의 경우 방사선사 5명과 방사선의 2명, 합계 7명으로 실험하였다. Hybrid 영상의 경우, 방사선 전공자 3명과 숙련된 방사선사 2명, 합계 5명으로 실험하였다. ROC곡선은 Metz가 작성한 ROCKIT Program을 이용하여 구하였다. Inverse image의 경우 관찰자 7명 전원, 방사선과의 2명, 방사선사 5명의 평균 ROC곡선의 Az는 각각 original image의 0.742, 0.793, 0.721에서, Inverse image의 0.775, 0.821, 0.753까지로, 통계적 유의차로 증가하였다. Hybrid image의 경우 관찰자 5명 전원, 숙련된 방사선사 2명, 방사선학 전공자 3명의 평균 ROC곡선의 Az는 각각 original image의 0.525, 0.491, 0.5478에서, Hybrid 영상의 0.4868, 0.539, 0.450로 변화 하였다. 결론적으로, 흉부단순사진에서 종양의 검출에 관하여, Inverse image은 유의하지만, Hybrid 영상의 경우 유의한 차이가 나타나지 않았다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.711-716
• /
• 2003

This paper presents the inverse dynamic analysis of the hydraulic excavator manipulator based on the experimental data. A three dimensional rigid multi-body model of the hydraulic excavator manipulator was built up. Inverse dynamic analysis for typical operation mode was carried out by the ADAMS program. In order to verify the analysis results with the measured, the hydraulic pressure and displacement of the cylinders were measured and the dynamic analysis was carried out using experimental data. From the results of the cylinder driving forces, good agreements are obtained between the analysis and the measurement.