• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.45-63
• /
• 2017

In this paper, we have formulated optimum Accelerated Life Test (ALT) plan for a parallel system with two independent components using masked data with ramp-stress loading scheme and Type-I censoring. Consider a system of two independent and non-identical components connected in parallel. Such a system fails whenever all of its components has failed. The exact component that causes the system to fail is often unknown due to cost and time constraint. For each parallel system at test, we observe its system's failure time and a set of component that includes the component actually causing the system to fail. The stress-life relationship is modelled using inverse power law, and cumulative exposure model is assumed to model the effect of changing stress. The optimal plan consists in finding out the optimum stress rate using D-optimality criterion. The method developed has been explained using a numerical example and sensitivity analysis carried out.

• Journal of the Korean Data and Information Science Society
• /
• 제28권4호
• /
• pp.947-955
• /
• 2017

A competing risk analysis has been applied when subjects experience more than one type of end points. Geskus (2011) showed three types of estimators of CIF are equivalent under left truncated and right censored data. We extend his approach to an interval censored competing risk data by using a modified risk set and evaluate their performance under several sample sizes. These estimators show very similar results. We also suggest a test statistic combining Sun's test for interval censored data and Gray's test for right censored data. The test sizes and powers are compared under several cases. As a real data application, the suggested method is applied a data where the feasibility of the vaccine to HIV was assessed in the injecting drug uses.

• 대한의용생체공학회:의공학회지
• /
• 제24권6호
• /
• pp.509-514
• /
• 2003

보행시 하지 주요 근육내의힘의 변화를 계산하기 위한 수학적 모델을 개발하였다. 인체는 7개의 운동 분절로 모델링 하였으며, 하지 당 8개의 수요 근육을 고려한 모델을 사용하였다. 보행시 하지 근육의 발생되는 힘의 변화는 최적화 기법을 적용하여 계산하였으며, 계산 결과는 기존의 EMG 데이터와 비교 검토하여 모델의 타당성을 확인하였다. 또한 보행시 각 운동 분절의 운동 데이터를 이용하여 역동력학적 기법으로 구해진 하지 관전내의 토크량의 변화와 비교에서도 본 연구에서의 계산 결과는 만족할 만한 일치를 보이고 있었다.

• Nonlinear Functional Analysis and Applications
• /
• 제26권3호
• /
• pp.451-474
• /
• 2021

In this paper, we investigate a hybrid algorithm for finding zeros of the sum of maximal monotone operators and Lipschitz continuous monotone operators which is also a common fixed point problem for finite family of relatively quasi-nonexpansive mappings and split feasibility problem in uniformly convex real Banach spaces which are also uniformly smooth. The iterative algorithm employed in this paper is design in such a way that it does not require prior knowledge of operator norm. We prove a strong convergence result for approximating the solutions of the aforementioned problems and give applications of our main result to minimization problem and convexly constrained linear inverse problem.

• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.14-22
• /
• 2022

To reduce the weight of the car and ensure the safety of the driver while driving, the existing 440 MPa-class mounting bracket was treated at 590MPa to improve collision safety and secure the weight of the vehicle body. The following conclusions were drawn from the tensile test, forming analysis, and springback prediction. In the formability and springback analyses using FLD, it could be confirmed that bending was an essential process because the formability and flatness were much better when bending was added than when bending was not applied. Based on the research results, it was deduced that the mold design was necessary so that the molding was carried out at a strain rate of 20% or less for stable molding.

• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.15-21
• /
• 1981

이 논문은 기계 번역을 위한 한국어의 구문분석 algorithm과 system구성에 관한 것이다. 종래의 언어학적 문장구조를 재검토하여 품사와 성분을 통일된 관점에서 형태론적으로 분석 다음, 효과적인 품사분류 algorithm을 제안하고, 역이동변형 algorithm을 적용한 성분구조를 attribute개념을 도입하여 phrase structure rule로 처리하였다. 또한 한국어 조합문자의 조직개념을 lexicon구성에 도입하고 breadth-first searching에 의하여 문장의 심층구조가 포함된 parsing tate을 생성하는 구문분석 system을 구성하였으며, system program에 의해 입력문장을 심층구조로 분석한 결과를 보였다.

• Computers and Concrete
• /
• 제25권3호
• /
• pp.215-224
• /
• 2020

In the present study, according to the important of porosity in low specific weight in comparison of high stiffness of carbon nanotubes reinforced composite, buckling and free vibration analysis of sandwich composite beam in two configurations, of laminates using differential quadrature method (DQM) is studied. Also, the effects of porosity coefficient and three types of porosity distribution on critical buckling load and natural frequency are discussed. It is shown the buckling loads and natural frequencies of laminate 1 are significantly larger than the results of laminate 2. When configuration 2 (the core is made of FRC) and laminate 1 ([0/90/0/45/90]_s) are used, the first natural frequency rises noticeably. It is also demonstrated that the influence of the core height in the case of lower carbon volume fractions is negligible. Even though, when volume fraction of fiber increases, the critical buckling load enhances smoothly. It should be noticed the amount of decline has inverse relationship with the beam aspect ratio. Investigating three porosity patterns, beam with the distribution of porosity Type 2 has the maximum critical buckling load and first natural frequency. Among three elastic foundations (constant, linear and parabolic), buckling load and natural frequency in linear variation has the least amount. For all kind of elastic foundations, when the porosity coefficient increases, critical buckling load and natural frequency decline significantly.

• 자원환경지질
• /
• 제21권1호
• /
• pp.97-106
• /
• 1988

The purpose of this study is to collect basic data which are prerequisite for quantitative analysis of coal logging data. The study involves laboratory measurements of physical properties such as seismic velocities (P,S-waves), resitivity and density of domestic and imported foreign coals. The relationships between these properties were analyzed by using cross-plots. Correlation between the physical properties of coal and the results of chemical analysis (calorie, fixed carbon, ash, moisture, volatile matter and sulfur contents) was also studied to obtain ideas about coal quality analysis using logging data. Summarized results are as follows: 1. $V_P$ is exponentialy related to $V_S$. And the average value of $V_P$ is about l.8 times as large as $V_S$. 2. Since coal has very low density compared with surrounding sedimentary rocks, density logging is appeared to be the best method for identifying coal seams and evaluating their qualities. 3. For the case of domestic coals, the ash contents and calorie show a perfect inverse relationship. Since the density increases as increase of ash content with a well-defined functional form, the ash content of domestic coals can be estimated by density measurements. 4. Because of low ash content, low density and high resistivity, foreign coals and domestic lignites are easily distinguished from domestic coals.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.41-46
• /
• 2006

충격응답함수와 조정법(regularization methods)을 이용하여 항공기 날개의 충격하중 복원 가능성을 검토하였다. 충격하중에 대한 구조의 응답을 내타낼 수 있는 충격응답함수를 날개 유한요소모델의 강성과 질량 자료로 유도하였다. 일반적으로 부적합(ill-posed) 특성을 지닌 충격응답함수의 역행렬은 반복 Tikhonov 조종법(Iterative Tikhonov Regularization Method)과 일반화 특이치 분해법(Generalized Singular Value Decomposition Method)을 사용하여 구하였다. 수치적 입증을 위하여 전투기급 주익을 사용하였다. 해당 주익의 유한요소해석을 통하여 임의의 충격하중에 대한 변위와 변형률을 계산하였으며, 이를 충격응답함수로 계산한 결과와 비교하였다. 또한, 유한요소해석에서 계산된 변형률을 사용하여 충격하중을 복원하였다. 수치적 입증 결과 항공기 구조의 충격하중 모니터링이 본 방법으로 가능할 수 있음을 보여주었다.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.67-76
• /
• 2006

Three-dimensional information of submarine topography was acquired by assembling DGPS and Echo Sounder, which is mainly used in the marine survey. However, the features of submarine topography, derived according to mechanical data, were confirmed using human eyes. Because the dredging capacity using a submarine surveying data influences harbor public affairs, analysis and the process method of surveying data is a very special element in construction costs. In this study, information on submarine topography is acquired by assembling DGPS and Echo Sounder. Moreover, the dredging capacity in harbor public affairs has been analyzed by the interpolation method: inverse distance to a power, kriging, minimum curvature, nearest neighbor, and radial basis function. Also, utilization of DGPS and Echo Sounder method in calculation of the dredging capacity have been confirmed by comparing and analyzing the dredging capacity and the actual one, as per each interpolation. According to this comparison result, in the case of applying Radial basis function interpolation and Kriging, 3.94 % and 4.61 % of error rates have been shown, respectively. In the case of the study for application of the proper interpolation, as per characteristics of submarine topography, is preceded in calculation of the dredging capacity relevant to harbor public affairs, it is expected that more speedy and correct calculation for the dredging capacity can be made.