• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.286-289
• /
• 1997

In the design of structure the forces acting on the structure are important parameter for noise and vibration control. However, in the complex structure, the forces at the injection pomt on the structure cannot be measured directly. Thus it is necessary to find out indirect force evaluation method. In thls paper forces have been measured with in-situ vibration responses and system information. Three existing techniques of indirect force measurement, viz. direct inverse, principal component analysis and regularization have been compared. It has been shown that multi-vibration responses are essential for the precise estimation of the forces. To satisfy those cond~tions, Rotary compressor is adopted as test sample, because it is very difficult to measurc the injection forces from internal excitat~on to shell. It has also been obtained that relatively higher force IS transmitted through three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation wlth curvature shell and plate and is investigated the possibility of force evaluation of rotary compressor as a complex structure.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2630-2637
• /
• 2020

The structure design of divertor Multi-Functional Maintenance Platform (MFMP) actuated by hydraulic system for China Fusion Engineering Test Reactor (CFETR) was introduced in this paper. The model of MFMP was established according to maintenance requirements. In this paper, Newton-Euler method and the improved virtual work principle were used, the equivalent driving force of each actuator was obtained through the equivalent Jacobian inverse matrix derived from velocity relationship among the components. The accuracy of the model was verified by ADAMS simulation. The stability control of the heavy-duty components driven by hydraulic cylinders based on Newton-Euler method and improved virtual work principle was established.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1296-1305
• /
• 2008

In this study, the spatial distribution of depth between alluvial soil and weathered soil of Song-do new city is analyzed using geostatistics. From analysis results, the boundary depth of north-east region is deeper than that of south-west region, and average depth of north-east region is 27.14m and average depth of south-west region is 23.25m. The boundary depth is estimated by ordinary kriging and inverse distance method, and estimated results are almost similarity. So, in Song-do new city, these two method can be used to estimate the boundary depth. The ordinary kriging method is a very useful tool because the more exact analysis of spatial continuity and distribution characteristic is possible.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.328-336
• /
• 2020

This paper presents an asymptotic analysis method using the PO(physical optics) approximation technique to analyze the scattering contribution of an electrically large object partially coated with a radar absorbing material(RAM). By using the feature of the PO technique that can calculate the equivalent current value for each mesh independently, instead of analyzing the entire structure, scattering analysis was performed only by calculating the current on the area where the RAM coating is applied. By the numerical examples, the accuracy and the computation time of the proposed method were verified, and the computational efficiency of inverse synthetic aperture radar(ISAR) of the electrically large objects that require enormous resources is improved.

• Structural Engineering and Mechanics
• /
• v.46 no.4
• /
• pp.459-486
• /
• 2013

A novel damage classification method based on wavelet packet transform and statistical analysis is developed in this study for structural health monitoring. The response signal of a structure under an impact load is normalized and then decomposed into wavelet packet components. Energies of these wavelet packet components are then calculated to obtain the energy distribution. Statistical similarity comparison based on an F-test is used to classify the structure from changes in the wavelet packet energy distribution. A statistical indicator is developed to describe the damage extent of the structure. This approach is applied to the test results from simply supported reinforced concrete beams in the laboratory. Cases with single and two damages are created from static loading, and accelerations of the structure from under impact loads are analyzed. Results show that the method can be used with no reference baseline measurement and model for the damage monitoring and assessment of the structure with alarms at a specified significance level.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.393-398
• /
• 2015

A very important part in vibration analysis is to calculate the frequency response function (FRF). In general, a large sized or/and complicated structure has many thousands to millions of degrees. Therefore, the FRF cannot be calculated by the traditional analysis method using an inverse matrix. This paper presents a new FRF calculation method of a superstructure by synthesizing sub-structure modes, of which the DOF can be deduced by partitioning into some sub-structures. To confirm its analysis results, the method was applied to an assembled plate ($B300{\times}L900{\times}t5mm$) with three diagonal sub-plates($B300{\times}L300{\times}t5mm$) in series and compared with the measured data. The test results have were comparable those of the calculated ones with an error less than 5%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.77-82
• /
• 1996

This paper is concerned with how to utilize kinematic redundancy to reconstruct the inverse kinematic solution which is not attainable due to hardware limitations. By analyzing the error due to hardware limitations, we are to show that the recoverability of limitation reduces to the solvability of a reconstruction equation under the feasibility condition. It will be next shown that the reconstruction equation is solvable if the configuration is not a joint-limit singularity. The reconstruction method will be proposed based on the geometrical analysis of recoverability of hardware limitations. The method has the feature that no task motion error is induced by the hardware limitations while minimizing a possible null motion error, under the recoverability assumed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.4 s.247
• /
• pp.387-392
• /
• 2006

This paper predicts the modified mass and stiffness of structure using the sensitivity coefficients with the iterative method. The sensitivity coefficients are obtained by the change of the eigenvectors according to structural modification. The method is applied to an examples of a 3 degree of freedom system by modifying mass and stiffness. The predicted mass and stiffness are in good agreement with these from the structural reanalysis using the modified mass and stiffness.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.8 s.227
• /
• pp.929-936
• /
• 2004

In the present work, shape of the mixing vane in Plus7 fuel assembly has been optimized numerically using three-dimensional Reynolds-averaged Navier-Stokes analysis of flow and heat transfer. Standard $k-{\epsilon}$ model is used as a turbulence closure. The Response surface method is employed as an optimization technique. The objective function is defined as a combination of heat transfer rate and inverse of friction loss. Bend angle and base length of mixing vane are selected as design variables. Thermal-hydraulic performances for different shapes of mixing vane have been discussed, and optimum shape has been obtained as a function of weighting factor in the objective function.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.396-403
• /
• 1991

A solution is presented for the computation of the elastic-creep stresses in a hollow cylinder subjected to nonaxisymmetric temperature distribution. The creep problem is treated by the Maxwell creep model. Laplace transformation is used for reformation of the governing equation of elastic problem and Hooke's law in a function of .gamma. , .theta. , and creep constant. The governing equation is set up using the Airy stress function which leads to the biharmonic equation. The solution is obtained by using Fourer series method and Laplace inverse method used to obtain the stress components which include the variation of time. This solution shows excellent agreement with Lamkin's and Boley & Weiner's solution. The viscoelastic stresses are also obtained for the fuel rob tube subjecting nonaxisymmetric thermal load.