• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.775-778
• /
• 2008

In general, forecast tsunami heights announced for tsunami warning are computed by using a linear tsunami model with coarse grids which leads the underestimation of inundation area. Thus, an accurate tsunami inundation map corresponding to the forecast tsunami height is indispensible for an emergency evacuation plan. A practical way to construct a relatively accurate tsunami inundation map was proposed in this study for the quantitative forecast of inundation area. This procedure can be introduced as in the followings: The fault dislocations of potential tsunami sources generating a specific tsunami height near an interested area are found by using a linear tsunami model. Based on these fault dislocations, maximum inundation envelops of the interested area are computed and illustrated by using nonlinear inundation numerical model. In this study, the tsunami inundation map for Imwon area was constructed according to 11 potential tsunami sources, and the validity of this process was examined.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.1-15
• /
• 2013

Great loss of life and property has been occurred by the severe flood globally. In Korea, a flood inundation map is used as one of the non-structural measures for reducing flood damage, and various inundation models have been studied for flood inundation analysis. This study applies LiDAR data and LISFLOOD model for flood inundation analysis and discusses the the modeling results from levee breaching scenarios for evaluating the applicability of the model to stream inundation modeling. In the results of LISFLOOD modeling, maximum inundation area was similar to the inundation map by HEC-RAS model just less than 4%. The inundation area by each levee breaching scenario showed the difference from 0.2% to 6.5%. Inundation processes were different each other according to the position of levee breach point, and maximum inundation area and depth were changed by the flow direction of stream and flood plain. This study shows that LISFLOOD model can be applied properly to stream inundation analysis using various inundation scenarios.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.164-173
• /
• 2009

MIKE21, a commercial hydrodynamic model, was applied at the Masan Bay to evaluate the model's applicability of simulating the inundation phenomena. A storm surge/inundation model which adopts overflow computation scheme was applied together for comparison. The results of both models show correspondence with not only observed inundation area but also inundation water depth to prove their ability as inundation models. Especially, the accuracy of the MIKE21 model, which just adopts wetting/drying scheme, does not seem to be behind the inundation model. Moreover, an inundation simulation of the virtual MAEMI which was generated at preceding study, was conducted. The inundation area of the virtual MAEMI is similar to that of the real MAEMI, but inundation water depth is deeper than the real MAEMI.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.88-100
• /
• 2009

An inundation analysis was performed on Hwapocheon, one of the tributaries of Nakdong River, which was inundated by heavy rain in August, 2002 with overtopping and levee break. The results of the developed model, 2D diffusion wave inundation analysis model, was compared with inundation trace map as well as inundation depth in terms of time and maximum inundated area calculated from FLUMEN model for the assessment of model applicability. The results from the developed model showed high fitness of 88.61% in comparison with observed data. Also maximum inundated area and spatial distribution of inundation zone were also found to be consistent with the results of FLUMEN model. Therefore, inundation zone and maximum inundation area calculated over a period of time by adopting 2D diffusion wave inundation analysis model can be used as a database for identifying high risk areas of inundation and establishing flood damage reduction measures.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.270-278
• /
• 2010

Applicability of the MIKE21 model as a real time coupled tide-surge model had been examined at the previous study. In this study, another applicability of the model as an inundation model is also examined. Prior to real cases, effect of artificial structures on the inundation is analyzed. The results show that inundation depth is not altered, while inundation area is lessened as a result of decreased inundation speed. Comparative study between the coupled model and an uncoupled storm surge model is also carried out at the Masan coastal zone, which shows the coupled model is considered to be plausible at the time to maximum inundation, while both models show similar results at the inundation area and inundation depth.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.191-191
• /
• 2017

Floods have become more widespread and frequent among natural disasters and consisted significant losses of lives and properties worldwide. Flood's impacts are threatening socio-economic and people's lives in the Mekong River Basin every year. The objective of this study is to identify the flood hazard areas and inundation depth in the Mekong River Basin. A rainfall-runoff and flood inundation model is necessary to enhance understanding of characteristic of flooding. Rainfall-Runoff-Inundation (RRI) model, a two-dimensional model capable of simulating rainfall-runoff and flood inundation simultaneously, was applied in this study. HydoSHEDS Topographical data, APPRODITE precipitation, MODIS land use, and river cross section were used as input data for the simulation. The Shuffled Complex Evolution (SCE-UA) global optimization method was integrated with RRI model to calibrate the sensitive parameters. In the present study, we selected flood event in 2000 which was considered as 50-year return period flood in term of discharge volume of 500 km3. The simulated results were compared with observed discharge at the stations along the mainstream and inundation map produced by Dartmouth Flood Observatory and Landsat 7. The results indicated good agreement between observed and simulated discharge with NSE = 0.86 at Stung Treng Station. The model predicted inundation extent with success rate SR = 67.50% and modified success rate MSR = 74.53%. In conclusion, the RRI model was successfully used to simulate rainfall runoff and inundation processes in the large scale Mekong River Basin with a good performance. It is recommended to improve the quality of the input data in order to increase the accuracy of the simulation result.

• Journal of Environmental Science International
• /
• v.13 no.1
• /
• pp.19-26
• /
• 2004

The purpose of the study was to construct a forecast system of flood inundation area at natural stream channels. The study built the system to interpret the flood inundation area in four stages ; constructing topography data around the stream channel, interpreting flood discharge, interpreting flood elevation in the stream channel, and interpreting the flood inundation and mapping. According to the result of the analysis, as for the characteristic of flood inundation around the area within the purview of this study, although there were areas where flood inundation over a bank caused a flooded area, the failure of the internal drainage in the ground lower than flood elevation caused more serious problems. Rather than the existing method where only the estimated flood elevation data is used based on the hydrographical stream channel trace model(such as the HEC-RAS model) to establish the flood inundation area, if the procedure introduced in this study was applied to interpret the floodplain, actual flood inundation area could be visibly confirmed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.157-164
• /
• 2008

A modeling and visualization system of flood inundation in natural river, FloodViz, has been developed. Unsteady river flow and flood inundation are calculated by FLDWAV model. FLDWAV model and HEC-RAS model have been applied to a flood event at the same time to check model reliability. Simulation results of the two models showed good agreements. Flood propagation and inundation process can be analyzed accurately and easily by using visualization function of the FloodViz. Even though FloodViz users don't know well about both hydraulics and hydrology, they can understand flood inundation phenomena easily. This system can be used as a useful tool in forecasting flood inundation and observing the simulation results. Countermeasures for natural disaster prevention due to flood inundation can be established rapidly by using the FloodViz.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.659-663
• /
• 2010

In recent, flood inundation damages by hydraulic structure failures have increased drastically and thus a variety of countermeasures were needed to minimize such damages. A real-time flood inundation prediction technique is essential to protect and mitigate flood inundation damages. In the context of real time flood inundation modeling, this study aims to develop a grid based two-dimensional numerical method for flood inundation modeling using globally-available DEM data: SRTM with $90m{\times}90m$ spatial resolution. The newly-developed model guarantees computational efficiency in terms of geometric data processing by direct application of DEM for flood inundation modeling and also have good compatibility with various types of raster data when compared to a commercial model such as FLUMEN. The model, which employed the leap-frog algorithm to solve shallow water and continuity equations, can simulate inundating flow from channel to lowland and also returning flow from lowland to channel by comparing water levels between channel and lowland in real time. We applied the model to simulate the BaekSan levee break in the Nam river during a flood period from August 10 to 13, 2002. The simulation results had good agreements with the field-surveyed data in terms of inundated area and also showed physically-acceptable velocity vector maps with respect to inundating and returning flows.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.379-387
• /
• 2006

An urban inundation model coupling an one-dimensional stormwater model, SWMM(Storm Water Management Model), and a two-dimensional inundation model was developed to simulate inundation caused by the surcharge of storm sewers in urban areas. The limitation of this model which can not simulate the interaction between drainage systems and surcharged flow was resolved by developing Dual-Drainage inundation analysis model which was based upon hydraulic flow routing procedures for surface flow and pipe flow. The Dual-Drainage inundation analysis model can simulate the effect of complex storm drainage system. The developed model was applied to Dorim, catchment. The computed inundated depth and area have good agreement with the observed data during the flood events. The developed model can help the decision support system of flood control authority for redesigning and constructing flood prevention structures and making the potential inundation zone, and establishing flood-mitigation measures.