• 공학교육연구
• /
• 제19권4호
• /
• pp.83-88
• /
• 2016

In this paper, we surveyed from students and professors of Hanbat National University to examine the current state of running the introductory engineering design and to derive the direction of future improvements of the subject. A total of 783 students from nine departments and 12 professors who are in charge of the introductory engineering design participated in the present questionnaire evaluation. Outcome categories of the interest in their major and the learning of design theory appears relatively lower than other learning outcomes of the introductory engineering design course. Accordingly, it is determined that the theoretical aspects of designing should be emphasized in performing a team project. The design process, writing and presentation ability, teamwork theory are dealt in more than 70% of the departments, but engineering ethics, patent, visualization education had not been addressed in a number of departments due to their department characteristics. While a lesson outcome of the creativity resulted in the largest for the students, most of the professor feel difficult in increasing the creativity. It is urgent to develope of teaching methods in order to promote the creativity in the introductory engineering design course.

• 공학교육연구
• /
• 제24권2호
• /
• pp.51-60
• /
• 2021

Although more than 15 years have passed since the introductory design courses were opened due to the introduction of engineering education certification in the civil engineering field, these courses have been operated somewhat unsatisfactorily compared to their importance as an introductory course for engineering design. This is partially because the quality of classes is affected by the instructor's individual ability due to the fact that a standard training plan for these courses has not been established so far. Therefore, in this paper, we try to present a reference model for the introductory design course by introducing a class operation case established through continuous improvement process over the last 10 years at Chungbuk National University. This case aims to cultivate students' problem solving and system design skills by carrying out projects to develop egg drop and wood bridge systems based on creative problem solving methodologies. As a result of a questionnaire survey conducted after the class, we found that students' problem solving and system design capabilities were improved significantly and there was a meaningful increase in level of interest and attention in civil engineering by taking this class.

• 공학교육연구
• /
• 제26권1호
• /
• pp.12-19
• /
• 2023

With the introduction of the accreditation of engineering programs in Korea, universities affiliated with the programs have opened introductory engineering design courses for first- or second-year students. Since these courses mainly aim at cultivating problem-solving skills through team projects, this type of classes has opened as face-to-face classes. However, from the beginning of 2020, online teaching was recommended or forced on universities due to the COVID-19 pandemic. Thus, effective design of online courses on introductory engineering design was inevitable during the period. In this paper, we introduce a case study of the course in the Department of Computer Science at S University in Fall 2021. Through concrete suggestions on project areas, selection of team members considering grade levels and interest, several systems for prevention of free riding, and carefully designed open-book exams, the course resulted in both high achievements and high satisfaction.

• 한국CDE학회논문집
• /
• 제18권1호
• /
• pp.28-35
• /
• 2013

Product Life cycle Management (PLM) is an indispensable tool for manufactures to develop competitive products in an efficient way. This enlarges the number of participants for product development who should understand PLM for their supporting activities. However, burdens for developing example products, maintaining complex PLM systems and training prerequisite skills for engineering tools such as CAD systems prohibit an efficient introductory course to PLM. This paper proposes a comprehensive introductory course to PLM that bases on general product development process. In addition, it enables participants to build their example products with familiar Lego blocks and to construct 3D CAD assembly models by using predefined 3D elements. The PLM system for the course provides an intuitive and simple user environment for participants to specify their parts lists, associated 3D CAD models, and product structure of example products. Experiences on a class of the course show it is a valid and efficient education and training method for the PLM introduction.

• 공학교육연구
• /
• 제9권1호
• /
• pp.61-74
• /
• 2006

본 연구에서는 체계적인 공학 설계 교육을 위한 입문 과정으로 개발된 '입문공학설계' 교과목의 내용과 운영 방식을 논의하였다. 이 교과목의 목적은 후속 설계 과목 학습에 필요한 기본 설계 소양을 갖추게 하고 공학에 대한 긍정적인 호기심을 자극하기 위한 것이다. 이를 위하여 본 수업은 학생들의 능동적인 참여로 이루어지는 수업을 기본 교수 방법으로 하여 창의적 사고 능력과 팀웍기술, 의사소통기술 배양을 위한 각종 설계 및 실습 과제를 개발하였다.

• 공학교육연구
• /
• 제21권6호
• /
• pp.74-80
• /
• 2018

This paper proposes practical teaching methods for efficient progress of project-based learning in engineering design education. Engineering design courses consist of three categories; introductory, individual and capstone design courses. This study concentrates on the case of individual design courses. Individual design courses act as bridges between introductory and capstone design courses and deal with applicable projects based on theoretical frameworks. In this study, practical teaching methods are applied to Artificial Intelligence curriculum as an individual design course for Juniors in Computer Engineering Major. The results on application of practical teaching methods show relatively positive in all aspects.

• 공학교육연구
• /
• 제15권2호
• /
• pp.52-57
• /
• 2012

This study summarized the case study of a course development of introductory engineering design considering the characteristics of civil and environmental engineering. The course mainly depends on conducting the design projects. The self-developed text book for the course consists of learning and activities of the core elements for the creation and decision of ideas and two independent design projects. Especially, the design project drew from a survey of students majoring in civil and environmental engineering and is well knitted to help students obtain the potential for soft-landing at higher major courses.

• 공학교육연구
• /
• 제18권4호
• /
• pp.66-75
• /
• 2015

Commonly it is perceived that it is difficult to teach engineering design and satisfy accreditation criteria in computer science and engineering related majors. However, since engineering design in these disciplines are a product design, it is more adaptable than other majors which are process design oriented. This paper shows that although there are subtle differences with conventional engineering design, engineering design education in computer science and engineering can be effectively done. This paper concentrates on how engineering design related curriculum can be constructed, what should be considered when designing such curriculum, and how engineering design can be taught in individual design courses(excluding introductory and capstone courses) based on case experience.

• 공학교육연구
• /
• 제6권1호
• /
• pp.15-21
• /
• 2003

이 논문은 펜실베니아 주립대학에서 실시된 수업개선에 관한 것으로 그 내용은 디자인 프로젝트를 재료역학 수업에 응용한 결과이다. 전통적인 강의를 활용한 수업과는 달리 학생들은 기계역학 디자인의 기초와 재료, 표준, 경제적인 요소, 제작상의 특성, 환경문제, 법 및 안전과 관련된 제반 문제들 등이 서로 연관되어 있음을 학습하도록 격려되었다. 협동학습 디자인 프로젝트를 통해 강사들은 학생들이 팀 단위의 의사결정, 평가기준의 설정과 통합, 현실적인 대안의 발견, 현실적인 제한점들에 대한 고려 등의 보다 고차원적인 내용을 학습할 수 있도록 도왔다. 새로운 수업개선이 학생들의 학습에 미친 영향을 알아보기 위해 1998년 가을학기에 설문조사를 실시하였다. 이 설문조사 결과에 따르면 학생들은 재료역학 입문수업에 대해 높은 가치를 부여하였다. 그러나 디자인 프로젝트에 대한 가치점수는 낮게 나타났고 오히려 전통적인 강의에 높은 가치를 부여했다. 더불어 이전 선수과목에서 높은 점수를 받았던 학생들이 디자인 프로젝트에 대해 낮은 가치를 보고했다. 공학교육자들을 위한 시사점과 향후 연구과제에 대한 제

• 디지털콘텐츠학회 논문지
• /
• 제16권1호
• /
• pp.53-61
• /
• 2015

최근 학습자 중심의 창의설계교육에 대한 관심과 요구가 급속히 높아지고 있으나 대부분의 대학에서는 아직 이를 위한 교과과정 및 창의설계실 등을 충실히 갖추고 있지 못하다. 본 논문에서는 공학교육에서 큰 관심을 모으고 있는 창의설계교육을 위한 설계중심의 교과과정 및 이를 수행하기 위한 종합설계실 구축 방안을 제시한다. 전자공학전공을 중심으로 기존 교과과정을 분석하고 이를 바탕으로 입문설계와 요소설계를 거쳐 종합설계로 이어지는 설계중심의 공학교육을 효과적으로 수행할 수 있는 새로운 교과과정 구성과 이 교과과정을 바탕으로 실무능력을 배양하기에 적합한 종합설계실의 구축 방안을 제시한다.