• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.3
• /
• pp.40-45
• /
• 2012

We substantially increased the temperature sensitivity of a fiber Bragg grating temperature sensor by gluing it onto a piece of bi-metal strip. The temperature-induced Bragg wavelength shift is increased upto 5 times more than that of the intrinsic FBG sensor by the strain effect from the deflected bi-metal. We showed the feasibility of the proposed sensor by comparing the temperature measuring experiments with those of the intrinsic FBG sensors. Also we measured temperature varying the length of the bi-metal pieces and analyzed the result effect of it.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10101-10106
• /
• 2015

The purpose of this study was to identify factors of intrinsic motivation that affect regular breast cancer screening and contribute to development of a program for strategies to improve effective breast cancer screening. Subjects were residing in South Korea Gangwon-Province and were female over 40 and under 69 years of age. For the investigation, the Intrinsic Motivation Inventory (IMI) was modified to the situation of cancer screening and was used to survey 905 inhabitants. Multinominal logistic regression analyses were conducted for regular breast cancer screening (RS), one-time breast cancer screening (OS) and non-breast cancer screening (NS). For statistical analysis, IBM SPSS 20.0 was utilized. The determinant factors between RS and NS were "perceived effort and choice" and "stress and strain" - internal motivations related to regular breast cancer screening. Also, determinant factors between RS and OS are "age" and "perceived effort and choice" for internal motivation related to cancer screening. To increase regular screening, strategies that address individual perceived effort and choice are recommended.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.129-133
• /
• 2000

It is reasonable to use the stereo vision and image processing technique to digitize 3D coordinates of grid points and to evaluate surface strains on a sheet metal parts. However this method has its intrinsic problems such as the difficulty in enhancement of bad images inevitable error due to digital image resolution of camera and frame grabber unreliability of strains and thickness evaluated from coarse grid on the corner area with large curvature and the limitation of the area that can be measured at a time. Therefore it is still hard to measure strain distribution over the entire surface of a medium,- or large-sized stamped part at a time even by using an automated strain measurement system. In this study the curvature correction algorithm based on the grid refinement and the geometry assembling algorithm based on the global error minimization (GEM) scheme are suggested. Several applications are presented to show the reliability and efficiency of these algorithms.

• Transactions of Materials Processing
• /
• v.22 no.6
• /
• pp.328-333
• /
• 2013

The current study aims to determine the limit strains more accurately and reasonably when producing a forming limit curve (FLC) from experiments. The international standard ISO 12004-2 in its recent version (2008) states that the limit major strain should be determined by using the best-fit inverse second-order parabola through the experimental strain distribution. However, in cases where fracture does not occur at the center of the specimen, due to insufficient lubrication, the inverse parabola does not give a realistic fit because of its intrinsic symmetry in shape. In this study it is demonstrated that an inverse quartic function can give a much better fit than an inverse parabola in almost all FLC test samples showing asymmetric strain distributions. Using a quartic fit creates more reliable FLCs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.30-35
• /
• 2003

In this paper, the transverse strain was measured using polarization maintaining fiber Bragg grating(PMFBG) sensor. PMFBG sensor was fabricated using phase mask and Excidmer laser. The reflected wavelength of PMFBG sensor had dual peaks due to intrinsic birefringence. To find the polarization axes, peak sensitivity was measured under compression test. The signal characteristics of PMFBG sensor were also examined in embedding condition. The embedded PMFBG sensor in epoxy block was loaded for the transverse strain measurement, The wavelength-swept fiber laser(WSFL) was used to construct the PMFBG sensor system. Experiments showed that the PMFBG sensor could successfully measure the transverse strain.

• Structural Engineering and Mechanics
• /
• v.44 no.6
• /
• pp.801-814
• /
• 2012

The strain rate effects on the interaction between a Mode I matrix crack and an inclined elliptic matrix-inclusion interface under dynamic tensile loadings were investigated numerically, and the results are in agreement with previous experimental data. It is found, for a given material system, that there are the first and the second critical strain rates, by which three kinds of the subsequent crack growth patterns can be classified in turn with the increasing strain rate, namely, the crack deflection, the double crack mode and the perpendicular crack penetration. Moreover, such a crack deflection/penetration behavior is found to be dependent on the relative interfacial strength, the inclined angle and the inclusion size. In addition, it is shown that the so-called strain rate effect on the dynamic strength of granule composites can be induced directly from the structural dynamic response of materials, not be entirely an intrinsic material property.

• Transactions of Materials Processing
• /
• v.27 no.2
• /
• pp.115-122
• /
• 2018

Most domestic and international standards on the forming limit diagram (FLD) including ISO 12004-2, use a 'position-dependent method,' which determines the forming limit from a strain distribution measured on the specimen after necking or fracture. However, the position-dependent method has inherent problems such as the incidence of asymmetry of a strain distribution, the estimation of missing data near fracture, the termination time of test, and the deformation due to the new stress equilibrium after a fracture, which is blamed for causing sometimes a significant lab-to-lab variation. The 'time-dependent method,' which is anticipated to be a new international standard for evaluating the forming limit, is expected to greatly improve these intrinsic disadvantages of the position-dependent method. It is because the time-dependent method makes it possible to identify and accurately determine the forming limit, just before the necking point from the strain data as continuously measured in a short time interval. In this study, we propose a new time-dependent method based on a Gaussian fitting of strain acceleration with the introduction of 'normalized correlation coefficient.' It has been shown in this study that this method can determine the forming limit very stably and gives a higher value, which is in comparison with the results of the previously studied position-dependent and time-dependent methods.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.12
• /
• pp.691-697
• /
• 2000

A fiberoptic sensor using a low-coherence SLD as a light source has been studied. The sensor system employing an intrinsic fiber Fabry-Peort interferometer as a sensing tip and a fiber Mach-Zehnder interferometer as a processing one, overcomes the ambiguous reading caused by the highly periodic natrue of conventional high-precision interferometric sensors and provides unambiguous identification of the desired phase among several candidates on the transfer function of an interferometric signal. A tentative application to the temperature sensor shows the potential that the fiberoptic sensor has a side-dynamic range of $0-900^{\circ}C$ as well as reasonable resolution higher than $0.1^{\circ}C$ without ambiguity. Due to the inherent property of the optical fiber itself and the intrinsic fiber Fabry-Perot interferometer, the proposed fiberoptic sensor will give obvious benefits when it is applied to harsh environments to monitor some physical parameters such as temperature, strain, pressure and vibration.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2186-2188
• /
• 2000

A fiberoptic sensor using an SLD as a light source has been studied. The sensor system employs an intrinsic fiber Fabry-Perot interferometer as a sensing tip and a fiber Mach-Zehnder interferometer as a processing one. A free loading test for temperature application shows that the fiberoptic sensor has a wide-dynamic range as well as high resolution. Due to the inherent property of the optical fiber itself and the intrinsic Fabry-Perot interferometer. the fiberoptic sensor gives obvious benefits when it is applied to harsh environments to monitor some physical parameters such as temperature, strain, pressure and vibration.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.155-176
• /
• 2005

There is some evidence that one of major factors to produce plantar fasciitis depends on the magnitude of the foot arch strain. The orthotics that can reduce the foot arch strain during locomotion may be effective to prevent or treat plantar fasciitis. Therefore, the purpose of this study was to investigate the effect of control condition and three types of foot orthotics on 3-dimensional foot arch strain that can produce plantar fasciitis during treadmill level and uphill walking and running. Sixteen male subjects are recruited and the arch length and height strain according to three types of foot orthotics with respect to control condition were measured by using two digital video cameras. The first hypothesis which the comfort of foot orthotics would be increased from arch pad, half length orthotics to full length orthotics was mostly accepted. It suggested that the types of the foot orthotics could be properly prescribed according foot regions that is pain or abnormal. The second hypothesis which the foot arch strain can be reduced by foot orthotics during level heel-toe walking and running and the third hypothesis which the foot arch strain can be reduced by foot orthotics during uphill heel-toe walking and running were rejected. The foot arch length and height strain during walking and running showed small and subject-specific characteristics and could not be optimal biomechanical variable to prove the overall comfort. The forth hypothesis which the foot arch strain cannot be reduced by foot orthotics during uphill toe walking and running was accepted. With the foot arch length and height strain during uphill toe walking and running the windlass mechanism suggested by Hicks can be explained successfully and excessive uphill toe walking and running can be one of cause of plantar fasciitis. The dynamic investigation on the foot arch such as walking and running should be carefully observed with integrated insights considering ligaments and foot bones as well as plantar fascia, extrinsic muscles and tendons, and intrinsic muscles and tendons.