• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.48-60
• /
• 1996

This paper focuses on the necessities of interworking and dervation of the requirements of interworking system for interworking between 64 Kbps based N-ISDN (narrowband ISDN) and B-ISDN(broadband ISDN). Furthermore, the design and the implementation of IWF (interworking function) are presentd. We analyze two ISDN signalling systems, and propose the architecture of interworking system. And then we make the baisc call procedure model between N-ISDN and B-ISDN, and verify the dynamic behaviors through the reachability tree of petri net. IWF is designed and implemented for transforming the differences between the two signalling systems. The operational confirmity of th eimplemented program was confirmed by the local test method. The performance of IWF was evaluated throguh the simulation language SLAM-II. As the result of evaluation shows, we confirm that the processing delay is maintained within 3 ms under the utilization 0.9.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2948-2957
• /
• 2000

A broadband access network in B- ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. To establish an end-to-end ATM connection, interworking functions between \'B5.2 interface's connection protocol and the signalling protocol, are perfonned at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. In this paper, we analyze and simulate above two interworking models in tenns of a connection setup delay and completion ratio, when call requests with eBR and VBR transfer capability arrive at the service node. We observed that the completion ratios of the two interworking models are quite closed. However the connection setup delay of parallel interworking model is improved by about 33% compared with that of the sequential interworking model.

• Journal of the Korean Professional Engineers Association
• /
• v.29 no.3
• /
• pp.94-104
• /
• 1996

When Broadband Integrated Services Digital Network(BISDN) becomes commercially available In public network, conventional Local Area Network(LAN)s will still be in use. The first wide spread application for B-ISDN will be the interconnection of LANs. The equipment providing the connection between the LAN and the BISDN will be given the general name Inter Working Unit(IWU). We addresses the congestion problem of many interworking issues. In this paper, Our study is concentrated on applying connectionless network protocol for interworking. We suggest a rate control method in the network layer to prevent a buffer overflow in the IWU. Since this rate control method can be applied to prevent buffer overflow in a congested IWU, We investigate the use of rate control to solve congestion problems of IWU and parallize network layer with rate control to lessen the congestion problem in IWU.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.237-246
• /
• 2000

A broadband access network in B-ISDN subscriber network, plays a role of concentration or multiplexing of various subscribers into a service node. For call and connection control functions, DSS2 and B-ISUP signalling protocols are standardized for each of a subscriber side and a network node. B-BCC and B-ANCC protocol were proposed for VB5.2 interface. This interface allows dynamic control of ATM connections at the broadband access network. To establish an end-to-end ATM connection, interworking functions between VB5.2 interface's connection control protocol and the signalling protocol, are performed at the service node. A sequential interworking model and a parallel interworking model were proposed for these interworking functions. The sequential interworking model recommended by ITU-T causes an overall connection setup delay by introducing the access network, because this model proceeds the signalling protocol of network node after the response of VB5.2 interface protocol. On the other hand, the parallel interworking model proceeds the signalling protocol and the VB5.2 interface protocol simultaneously. The simultaneity of the parallel interworking model minimizes the overall connection setup delay. In this paper, we analyze and simulate above two interworking models with B-BCC or B-ANCC protocol in terms of a connection setup delay and completion ratio.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.5
• /
• pp.619-627
• /
• 1999

To support multimedia services between network domains with different environments, it is required to map the functionalities in many aspects. In this paper, we implemented interworking gateway which provides protocol conversion and QoS(Quality of Service) adaptation to interwork DAVIC services based on ATM(Asynchronous TRansfer Model )network and Internet AV services. The interworking gateway converts RTSP(Real-Time Streaming Protocol ) message into DSM-CC(Digital Storage Media Command & Control) messages to control the stream that is served in ATM network, and transmits data stream by using RTP(Real-Time Transport Protocol) The interworking gateway provides QoS adaptation functionalities by QoS monitoring and MPEG filtering to meet the variation of network bandwidth.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.455-464
• /
• 2001

For future multimedia services, one of the most crucial issues is building an access network that can accommodate multimedia services in subscriber network. The VB5.2 interface of B-ISDN located between an access network and a service node allows dynamic allocation and release of ATM resources. The SG 13 of ITU-T is standardizing the B-BCC protocol, which is sequentially interworked with signaling protocols in the service node. To minimize a connection setup delay of the sequential interworking mode, we proposed the parallel interworking model in which the SN executes simultaneously the connection control protocol of VB5.2 interface and signaling protocol. We simulate two interworking models in terms of a connection setup delay and a completion ratio. The results of simulation show that our proposed parallel interworking model for the VB5.2 interface reduces the setup delay and has the similar completion ratio compared to the sequential interworking model. however, the connection setup delay of parallel interworking model becomes about seven tenths of that of the sequential interworking model and the improvement become larger as the arrival rate increased.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.405-411
• /
• 2002

Open interfaces in the optica] Internet have been progressed by OIF's ISI, ITU-T ASTN's CCI and IETF's GSMP extensions with optical switching. These open interfaces enable the separation between the control plane and the optical transport plane. This separation allows flexibility in the network, but it suffers more setup delay than the traditional switch-by-switch connection setup. We propose the parallel interworking model, which will reduce the connection setup delay in the open interface of optical Internet. Based on the switch controller's caching capability about networks states, the parallel interworking procedures between signaling protocol and GSMP protocol are performed in the switch controller. We simulated and evaluated our proposed parallel interworking model and the existing sequential interworking model in terms of a connection setup delay and a completion ratio. We observed that the completion ratios of the two interworking models were quite close. However the connection setup delay of parallel interworking model is improved by about 30% compared with that of the sequential interworking model.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.190-192
• /
• 2000

Interworking of legacy TC application and CORBA-BASED one is important to satisfy emerging market demands of the rapid introduction of new multimedia services and building of scalable, flexible, and interoperable service control architecture. For this, we develop generic TC/CORBA gateway on interworking between. TC and CORBA system Generic TC/CORBA gateway can be used for interworking in many fields of telecommunication service control such as INAP, MAP, other TC-based application parts, and mobility management of IMT-2000. Finally, we propose the object pool mechanism for efficient management of TC-user objects and it is helpful for enhancement of scalability and reduction of the response time of remote service operations.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2019

In this paper, we propose an efficient congestion control scheme for interworking between 5GS(5G system) and LTE(Long-Term Evolution), called ECC(Efficient Congestion Control). The proposed congestion control scheme (ECC) is considered for coexistence of 5GS and legacy LTE systems and provides a prompt service connectivity based on overriding method while the backoff timer is running in the UE. Also, we briefly introduce Rel-15 5GS from a congestion control perspective and the proposed ECC and simulation results for the existing legacy congestion control mechanism and ECC in the 5GS-LTE coexisting environment are presented. Lastly, the improvement direction is considered in future 3GPP 5GS phase 2 standard in this paper.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1529-1538
• /
• 1999

광대역 액세스 망은 B-ISDN 환경에서 다양한 유형의 가입자들을 서비스 노드로 집선하는 기능을 수행한다. ITU-T의 SG13에서는 광대역 액세스 망과 서비스 노드 사이에서 ATM 자원의 동적인 할당 및 해제를 위하여 연결 제어 프로토콜의 표준화를 수행하고 있다. ATM 연결의 설정을 위한 연결 제어 프로토콜과 신호 프로토콜의 연동 기능은 서비스 노드에서 수행되며, ITU-T에서는 순차적 연동 모델을 채택하고 있다. 순차적 연동 모델은 SN에서 각 프로토콜의 절차가 순차적 방식으로 연동되므로 연결 지연이 크다. 본 논문에서는 광대역 액세스 망의 도입으로 인한 연결 설정 지연을 최소화하기 위하여 병렬형으로 수행되는 연동 모델을 제시하였다. 그리고 본 논문에서 제안한 병렬형 연동 모델의 성능 분석을 통하여 순차적 연동 모델과의 연결 설정 지연 및 완료비에 대한 비교, 분석을 수행하였다. 성능 분석에서 사용된 워크로드 파라미터는 RACE MAGIC 프로젝트의 결과를 적용하였다. Abstract In B-ISDN environment, various subscribers are concentrated into a service node via a broadband access network. The SG13 of ITU-T is standardizing a connection control protocol which provides dynamic allocation of ATM resources between an access network and a service node. To establish an ATM connection, interworking functions between the connection control protocol and the signaling protocol are performed at the service node. ITU-T adopts the sequential interworking model. In this paper, we propose the parallel interworking model which minimizes the overall connection setup delay by introducing the access network. Using the performance analysis, we compare our proposed parallel model with the existing sequential model in terms of connection setup delay and completion ratio. The workload parameters of RACE MAGIC project are applied to the analysis and simulation.