• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.29-36
• /
• 2012

PURPOSES : Plastic deformation is frequently made in intersection asphalt pavement at its early age due to deceleration and stoppage of vehicles. This study has been performed to provide a mechanistic basis for reasonable selection of paving method to minimize the plastic deformation at intersection. METHODS : Pavement layer, temperature, traffic volume of the intersections managed by the Daejeon Regional Construction and Management Administration were collected to calculate asphalt dynamic modulus with pavement depth by using a prediction equation suggested by the Korean pavement design guide. Performance of ordinary dense-graded asphalt pavement, polymer modified asphalt pavement, and fiber reinforced asphalt pavement was analyzed by finite element method and the results were used in a performance model to predict the plastic deformation. RESULTS : In aspect of performance, the three paving methods were usable under low traffic while the fiber reinforced asphalt pavement was the most suitable under heavy traffic. CONCLUSIONS : Reasonable paving method suitable for traffic characteristics in the intersection might be decided by considering economic feasibility.

• 제어로봇시스템학회논문지
• /
• 제16권8호
• /
• pp.761-765
• /
• 2010

This paper presents the design of optimal fuzzy classifier for human detection by using genetic algorithms, one of the best-known meta-heuristic search methods. For this purpose, encoding scheme to search the optimal sequential intersection points between adjacent fuzzy membership functions is originally presented for the fuzzy classifier design for HOG (Histograms of Oriented Gradient) descriptors. The intersection points are sequentially encoded in the proposed encoding scheme to reduce the redundancy of search space occurred in the combinational problem. Furthermore, the fitness function is modified with the true-positive and true-negative of the confusion matrix instead of the total success rate. Experimental results show that the two proposed approaches give superior performance in HOG datasets.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.91-98
• /
• 2015

PURPOSES : Although signalized intersections have been considered the best way to control traffic volume in urban areas for several decades, roundabouts are currently being discussed as an alternative way to control traffic volume, especially when traffic is light. Because a roundabout's efficiency depends on the load geometry as well as the traffic volume, design guidelines for roundabouts are recommended only if the incoming traffic volume is very low. It is rare to substitute a roundabout for an existing signalized intersection in urban areas. This study aims to estimate the benefits from the transformation of an existing signalized intersection into a roundabout in an urban area. When there is a more moderate volume of traffic, roundabouts can be effectively used by optimizing signals located at an approaching roadway. METHODS : The methodologies of this paper are as follows: First, a signalized intersection was analyzed to determine the traffic characteristics. Second, the signalized intersection was transformed into a roundabout using VISSIM microscopic traffic simulation. Then, we estimated and analyzed the effects and the performance of the roundabout. In addition, we adjusted a method to improve the benefits of the transformation via the optimization of signals located at an approaching road to control the incoming traffic volume. RESULTS : The results of this research are as follows: The signal-optimized roundabout improved delays compared with the signalized intersection during the morning peak hour, non-peak hour, and evening peak hour by 1.78%, 12.45%, and 12.72%, respectively. CONCLUSIONS : According to the simulation results of each scenarios, the signal-optimized roundabout had less delay time than the signalized intersection. If optimized signal control algorithms are installed in roundabouts in the future, this will lead to more efficient traffic management.

• 한국통신학회논문지
• /
• 제39B권8호
• /
• pp.544-554
• /
• 2014

본 논문에서는 교차로 주변의 고정된 위치에 있는 노변기지국과 WAVE/DSRC 기반 자동차통신단말, 그리고 스마트폰 앱을 긴밀하게 상호 연동하는 사이버-물리 교차로 시스템(CPIS)을 소개한다. CPIS 구조를 기반으로 교차로 정지시간과 연료소모를 줄이기 위한 참조이동모형 기반 녹색신호 최적화 속도조언(GLOSA-RMM)을 제안한다. GLOSA-RMM은 자동차의 다양한 참조이동모형들을 기반으로 자동차의 현재 위치/속도 정보와 교차로 교통신호 정보를 고려하여 적절한 속도조언을 결정하고, 이를 화면과 음성으로 동시에 제공하여 운전자의 부주의를 최소화한다. 임베디드 시스템 기반의 노변기지국과 자동차통신단말, 그리고 안드로이드 앱(App)의 개발을 통해 CPIS 시작품을 구축하고, 실차 환경에서 실험을 수행하여 GLOSA-RMM 알고리듬이 교차로 정지시간과 연료 소모를 줄일 수 있음을 보인다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2015년도 제52차 하계학술대회논문집 23권2호
• /
• pp.161-163
• /
• 2015

본 논문은 교통 혼잡도가 높은 월계 2교 4거리 교차로에 센서를 이용하기 위한 교차로 PLC 프로그램을 개발하는 것을 목적으로 한다. 이를 위해 교차로에서 발생하는 차량사고와 혼잡을 방지하지 위한 소프트웨어 요구사항 명세서(SRS)를 정의하고, 이를 바탕으로 소프트웨어 설계서를 작성한다. 또한 XP-Builder 시뮬레이터를 사용하여 센서기반 교차로 신호등 PLC 프로그램을 구현한다.

• 대한교통학회지
• /
• 제27권3호
• /
• pp.91-102
• /
• 2009

도로설계 안전성을 평가하기 위해서는 도로의 설계 요소변화가 사고에 미치는 영향을 예측할 수 있어야 한다. 이를 위해 본 연구에서는 통계적 방법, 사고이력, 전문가의 판단, 그리고 기존문헌고찰 등 다양한 방법을 통하여, 설계요소의 특징과 사고율 및 사고빈도의 관계를 반영할 수 있는 AMF(Accident Modification Factor)를 개발하고자 하였다. 본 연구에서는 AMF를 좌회전전용차로, 우회전전용차로, 시거, 교차각 등의 항목을 대상으로 개발하였다. 개발된 AMF를 적용한 경우의 사고 예측값, 사고예측모형을 통한 예측값을 실제 사고데이터와 비교분석함으로써 적정성을 검토하였다. 분석결과, AMF를 적용한 예측값이 사고예측모형을 통한 예측 값보다 예측력이 우수함을 확인할 수 있었다. 이러한 결과는 사고를 예측함으로써 도로설계 안전성을 평가하는 알고리즘에 있어 AMF가 도로의 설계요소의 특성을 보다 효과적으로 반영하며, 지방부 교차로에서 각각의 해당요소가 사고에 미치는 영향을 판단할 수 있는 지표가 될 수 있음을 의미한다.

• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.293-300
• /
• 2000

The non-manifold geometric modeling technique is to improve design process and to Integrate design, analysis, and manufacturing by handling mixture of wireframe model, surface model, and solid model in a single data structure. For the non-manifold geometric modeling, Euler operators and other high level modeling methods are necessary. Boolean operation is one of the representative modeling method for the non-manifold geometric modeling. This thesis studies Boolean operations of non-manifold model with the data structure of selective storage. The data structure of selective storage is improved non-manifold data structure in that existing non-manifold data structures using ordered topological representation method always store non-manifold information even if edges and vortices are in the manifold situation. To implement Boolean operations for non-manifold model, intersection algorithm for topological cells of three different dimensions, merging and selection algorithm for three dimensional model, and Open Inventor(tm), a 3D toolkit from SGI, are used.

• 한국도로학회논문집
• /
• 제10권3호
• /
• pp.47-56
• /
• 2008

일반도로구간에서의 사고발생건수는 2000년부터 2006년까지 감소추세를 보이는 반면 교차로에서의 교통사고건수는 현재까지 꾸준하게 증가하고 있기 때문에 교차로에서의 안전성을 증대시키기 위한 노력이 절실히 필요한 실정이다. 본 연구에서는 신호교차로에서의 도로조건, 교통조건, 교통운영상의 조건 등을 분석하여 교차로의 설계 안전성을 저해시키는 요인들을 찾아내고, 그 요인들과 사고와의 상관관계를 이용하여 지방부 4지 신호교차로의 안전성 판단을 위한 사고 예측모형을 개발하고자한다. 또한 사전에 위험요소를 제거하여 교차로에서의 안전성 평가를 위한 가이드라인을 제시함으로서, 교차로에서의 안전성을 높이는데 그 목적이 있다. 본 연구는 교차로에서의 사고분석을 위하여 비선형 회귀분석을 통해 사고모형을 개발하였고, 이러한 모형들을 이용하여 차대차 사고에 영향을 미치는 주요 설명변수들에 대한 분석을 시도하였다. 모형분석결과, 포아송회귀분석(Poisson Regression)이 모형개발에 가장 적합한 것으로 나타났으며, 사고에 영향을 미치는 변수로는 좌회전 전용차로, 횡단보도, 제한속도, 조명시설, 교차각, ADT 등으로 분석되었다.

• Journal of Computational Design and Engineering
• /
• 제2권3호
• /
• pp.165-175
• /
• 2015

One of the current challenges in the domain of the multicriteria shape optimization is to reduce the calculation time required by conventional methods. The high computational cost is due to the high number of simulation or function calls required by these methods. Recently, several studies have been led to overcome this problem by integrating a metamodel in the overall optimization loop. In this paper, we perform a coupling between the Normal Boundary Intersection - NBI - algorithm with Radial Basis Function - RBF - metamodel in order to have a simple tool with a reasonable calculation time to solve multicriteria optimization problems. First, we apply our approach to academic test cases. Then, we validate our method against an industrial case, namely, shape optimization of the bottom of an aerosol can undergoing nonlinear elasto-plastic deformation. Then, in order to select solutions among the Pareto efficient ones, we use the same surrogate approach to implement a method to compute Nash and Kalai-Smorodinsky equilibria.

• 한국CDE학회논문집
• /
• 제3권3호
• /
• pp.183-191
• /
• 1998

There are many available algorithms based on the different approaches to solve the intersection problems between two curves. Among them, the implicitization method is frequently used since it computes precise solutions fast and is robust in lower degrees. However, once the degrees of curves to be intersected are higher than cubics, its computation time increases rapidly and the numerical stability gets worse. From this observation, it is natural to transform the original problem into a set of easier ones. Therefore, curves are subdivided appropriately depending on their geometric behavior and approximated by a set of rational quadratic Bezier cures. Then, the implicitization method is applied to compute the intersections between approximated ones. Since the solutions of the implicitization method are intersections between approximated curves, a numerical process such as Newton-Raphson iteration should be employed to find true intersection points. As the seeds of numerical process are close to a true solution through the mix-and-match process, the experimental results illustrates that the proposed algorithm is superior to other algorithms.