• The KIPS Transactions:PartD
• /
• v.14D no.2
• /
• pp.235-240
• /
• 2007

WebInterphone is a temporary composite word made with a Web and a Interphone, and the WebInterphone system has been developed as a new ahrdware/software solution under the .NET environment to remove the drawback of a Interphone which is used only if a host and a visitor should be in same place. In the WebInterphone system, a WebInterphone is connected to a home PC which is also connected to Internet such that a host and a visitor could have a real time communications even though nobody is at home. In this paper, the structure of the WebInterphone system and its operation process are discussed.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.157-160
• /
• 1988

This paper describes the development of the Interfacing unit between PSTN and interphone network. The designed and realised system detects the ring signal from PSTN and makes off-hook condition when it is detected. Then the caller can hear the response tone from the unit and the tones of the interphone network condition. The developed system receives the interphone number to which the caller wants to connect by MFC tones and drives Interphone switch matrix. Thus, a call is connected to the interphone user directly. The caller may press the interphone number up to 10 digits and the last two of which are recognized as valid ones. The caller must press the first digit within 20 seconds after system response.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2597-2599
• /
• 2001

This paper has developed the power line interphone system with the amplitude modulation technique. We described the Amplitude modulation and demodulation circuit and the line coupler for the implementation of the power line interphone. and suggested the experimental result for the signal attenuation, demodulated signal, spectrum.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.251-255
• /
• 2004

Electric cables such as multi-interphone cables and ribbon cab]os are commonly used for data aquisition in the DC resistivity survey. In general, electromagnetic induction may occur in the electric cables when electric current flows through them. In case of using multi-interphone cables in the DC resistivity survey, electromagnetic induction could take place due to the entangled wires of the multi-interphone cables, when the current flows through them. Then, the electromagnetic induction may cause measured DC resistivity data to be distorted. In this study, a monitoring system with PXI (PCI Extention for Instrumentation) was constructed to examine signal distortion on the DC resistivity data, attributed to the electromagnetic induction. Common electric cables used in the DC resistivity survey were tested to observe the waveforms of the electric voltages. The waveforms measured were compared to examine signal distortion due to the electromagnetic induction. The results may provide information on the resistivity data obtained using different electric cables in the DC resistivity survey. The distortion of waveforms attributed to the electromagnetic induction wat not observed when using ribbon cables for DC resistivity data aquisition, while the distortion were observed when using multi-interphone. Therefore, the ribbon cables provide better quality of data than other cables in the DC resistivity data aquisition.

• Electronics and Telecommunications Trends
• /
• v.31 no.3
• /
• pp.42-49
• /
• 2016

전자파 인체영향 관련 다양한 연구들이 유럽은 물론 미국, 일본, 중국 등 기술 선진국을 중심으로 전세계적으로 진행되고 있다. 특히, 유럽에서는 FP7 RTD 프로젝트의 일환으로 국가 간 혹은 관련 산업 간 컨소시엄을 구성하여 1990년대부터 전자파에 의한 인체영향과 관련된 다양한 프로젝트가 수행되었으며 현재도 다양한 주제의 프로젝트들이 수행 중이다. 본고에서는 유럽을 중심으로 진행 중인 전자파 인체영향 관련 프로젝트, 즉 휴대전화 전자파와 인체영향에 대해 연구를 수행하는 Interphone Study, Mobi-Kids Study, 그리고 Mobi-Kids 연구결과 및 프로토콜을 기반으로 일반인에 대해 누적되고 종합적인 전자파 영향 연구를 수행하는 GERoNiMO 프로젝트, 그리고 노출량 저감 관련 LEXNET 프로젝트에 대해 소개하였다.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.58-63
• /
• 2005

It is an emergency which is in the process of existing using of passenger compartment equipment of the rolling stock to sprout and interphone wiring and by the fire sensor which perceives the smoke in the use passenger car ceiling the receiver which is to driver's cabin it leads and the fire occurrence alarm voice sprouts carried on shoulder but, by no. of the car indication ramp it divides the corresponding vehicle and from inside the passenger compartment of the rolling stock from fire occurrence hour driver's cabin corresponding passenger no. of the car. It is accurate and in order it will be able to perceive. It will be able to confront initially quickly with the technique which it composes. It is regarding the fire safety surveillance system it will be able to embody at the expense which is cheap in order to use existing wiring.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.52-57
• /
• 2014

The present study suggests the fundamental method for the prediction time of the fire origin by analyzing the combustion phenomenon of inflammable material in the building structure. The heat release rate (HRR) with time variant is evaluated for the interphone as a inflammable material, which is opted from the fire incidents in the stairwell. the fire dynamics simulator (FDS ver. 6.1) is applied in order to analyze the difference of the smoke inflow time to the downstair from the fire event area with various fire pattern. The results show that the maximum inflow time difference for the case of the interphone made from ABS materials is about 4.93 times with the input conditions of heat flux values and the environment in the FDS for the fixed stairwell which composed of total volume $291.3m^3$, floorage $23.3m^2$ and the height of each floor 2.5 m. This research can be practical information for the application method of simulation scheme with experimental data to the fire Identification.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.186-191
• /
• 2008

Injection molding is used to manufacture various kinds of products including very thin plate like frames. One such product is Door video phone system Panel which is our present object of investigation. During the molding process, large deflection problems in the final product always provokes for the several trials for the accuracy. To solve the issue we use Moldflow6.2 which is injection molding simulation software. It simulates the product exactly the way it happens in actual manufacturing environment. Differences in the geometrical parameters such as thickness changes will lead to the large deformation problems in the frame. However in our present study we simulate it in a well defined condition under several trials. Interesting observations are made in minimizing the deformation of the frame during the injection molding process. This way of approach is very useful in further works if any changes have to be made in the product.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.119-122
• /
• 2003

The purpose of this study is to find problems of "Electricity equipmentand" and "Electricity practic II" tectbook applied in 6th Technical High School Curriculum and to make direction of "Power equipment II" textbook applied in 7th Technical High School Curriculum. The method of this study is questionnaire survey. 120 teachers of 40 schools were selected by cluster sampling method. The main findings of this study are as follow. 1) We should make the composition of textbook easy. 2)The illustration, photograph and drawing of textbook are fitted well. 3) "power equipment II" textbook applied in 7th Technical High School Curriculum would contented follows : lighting equipment, elevator equipment, broadcasting equipment, interphone equipment.

• Environmental Analysis Health and Toxicology
• /
• v.30
• /
• pp.15.1-15.11
• /
• 2015

Objectives There has been a growing concern about the possible carcinogenic effects of the electromagnetic radiofrequency fields emitted from mobile phones. The purpose of this study was to investigate the association between mobile phone use and the development of gliomas in Korea. Methods Our study methods were based on the International Interphone study that aimed to evaluate possible adverse effects of mobile phone use. This study included 285 histologically-confirmed Korean patients 15 to 69 years of age, with gliomas diagnosed between 2002 and 2007 in 9 hospitals. The 285 individually matched controls were healthy individuals that had their medical check-up in the same hospitals. Unconditional logistic regression was used to calculate the adjusted odds ratios (aORs) and 95% confidence intervals (CIs) for use of mobile phones. Results For the entire group, no significant relationship was investigated between gliomas and regular use of mobile phones, types of mobile phones, lifetime years of use, monthly service fee, and the other exposure indices. Analyses restricted to self-respondents showed similar results. For ipsilateral users, whose the body side for usual mobile phone use match the location of glioma, the aORs (95% CIs) for lifetime years of use and cumulative hours of use were 1.25 (0.55 to 2.88) and 1.77 (0.32 to 1.84), respectively. However, the contralateral users showed slightly lower risk than ipsilateral users. Conclusions Our results do not support the hypothesis that the use of mobile phones increases the risk of glioma; however, we found a non-significant increase in risk among ipsilateral users. These findings suggest further evaluation for glioma risk among longterm mobile phone users.